|
|
Control and regulation of the temperature of the drug transport box
Maťašová, Daniela ; Králík, Martin (referee) ; Sekora, Jiří (advisor)
This bachelor thesis deals with the solution of drug transport in a transport box over longer distances. The work also deals with sensors for temperature measurement and methods of its control and regulation. The essence is the design, implementation and verification of the functionality of the transport device, which allows the display of continuous information about the state of the temperature inside the transport box. Temperature control is powered from the car’s on-board network and temperature sensing is powered independently. The transport device allows the setting of the limit temperature up to 35 °C, while exceeding it is indicated by an acoustic and visual alarm. The transport box, which is the result of the work, allows the transport of drugs, and ultimately meets all the requirements of the assignment.
|
|
| |
|
|
Laboratory device with temperature control
Telecký, Jakub ; Škrabánek, Pavel (referee) ; Němec, Zdeněk (advisor)
This work deals with regulation and procedures that can be used for this. The theoretical part therefore presents the basic concepts of automation and controllers. The main part is the practical part. The purchased system consists of a regulated system, which must be set up correctly. Using system identification and known procedures, sample examples of how to best set the controller are compiled. The result is a sample laboratory task that automation students can try and gain experience with methods of setting up the controller.
|
|
|
Temperature control
Soviš, Jiří ; Glos, Jan (referee) ; Richter, Miloslav (advisor)
The thesis deals with the issue of temperature control by means of an uncontrolled source of waste heat in a closed room. The main purpose of this thesis is to get acquainted with problematics and technology used in the field of HVAC. Part of the thesis is a solution design of temperature control in which the heat loss from the compressor is used to heat the compressor room and as a supplementary heat source to the production hall to reduce costs. As part of the algorithm solution, was created a temperature model, developed in Matlab / Simulink, which was used to design a PI controller using integral quality control criterion ITAE and Nelder-Mead simplex.
|
|
|
Design concept of the facility for the educational objectives of the boiling crisis
Vojáčková, Jitka ; Škorpík, Jiří (referee) ; Martinec, Jiří (advisor)
This thesis deals with a design concept of the facility for the educational objectives of the boiling crisis. In the first part, the issue of boiling crisis is explained. There are also examples of some experimental facilities in the world. The second part includes design concept of a loop, which is accompanied by designs of individual devices, such as separator, condenser, exchanger, pump, water tank, electric heater. The thesis also states designs of throttle control, temperature control and flow control.
|
|
| |
|
|
Model Of Solar Heating in Outdoor Swimming Pool
Bartoň, Martin ; Malounek, Petr (referee) ; Chomát, Luděk (advisor)
This work deals with modeling of the technological process of heating the outdoor swimming pool. In the theoretical part are given the necessary information for resolving the simulation of heating process. Based on the theoretical background is elaborated a mathematical model of swimming pool and the technological process. This model is programmed in ANSI C language and implemented into the microcontroller ATmega8. There is also a model of the whole problem in Matlab Simulink. The result of this work is practicum model, which simulates the technological process of swimming pool heating. This model is connected to PLC B&R in which is implemented regulation and visualisation of the technological process.
|
|
|
Microcontroller based temperature controller
Perůtka, Martin ; Fiedler, Petr (referee) ; Bradáč, Zdeněk (advisor)
The aim of the work was to design and carry out a microprocessor driven temperature controller which will be operated by PC or immediately by its own control panel. The controller should serve, for example, as a regulation of temperatures in rooms, in ovens where electrical energy is used for heat production. This controller is able to measure temperature through connected temperature sensors, which means a thermistor PT1000 and a thermocouple type K, and to regulate temperature by the help of a heating body connected to the power output part of the controller.In this piece of work there is an issue of temperature measuring by the help of thermocouples and thermistors analysed, there are also mentioned the means of controlling and switching of alternating electrical tension for power operating and analysis of an issue of device connection and communication by the help of RS232 interface and USB with PC. The work also deals with a design of PSD controller with its subsequent realisation. The controller is tested on a micro-condensational siccative oven developed for the UTB research in Zlín.
|
|
|
Monitoring and regulation of water reservoir
Malý, Michal ; Fedra, Zbyněk (referee) ; Frýza, Tomáš (advisor)
This work is sight on production automatic machine for temperature adjustment and highs water level in reservoir. Automatic machine watch air temperature, water temperature in reservoir and temperatures on solar panel. Further watch water mark in reservoir by the help of rustless probe. By the help of this way adventitious data governs circulatory pump and solenoid valve for suffer waters. Work includes full technical documentation including PCB.
|
|
|
Construction and evaluation of in vitro set of holes for chondrogenic differentiation of MSC cells
Kříž, Marek ; Sekora, Jiří (referee) ; Čmiel, Vratislav (advisor)
Bachelor thesis concentrates on the cultivation of mesenchymal cells in vitro, damage to the articular cartilage and its replacement with the chondrogenic cells. The next section is devoted to each type of temperature control for heating and maintaining the temperature inside a closed system, the type of detector temperature and heating using the Peltier element. Assembly heater box, measuring the temperature profile inside the box with Labview program, control with Arduino platform, survival and differentiation of cells.
|
guest ::
