|
|
Urban Analysis of the Town of Telč with Focus on the Quality of Space
Jakwerth, Eduard ; Májek, Jan (referee) ; Tichý, Jan (advisor)
The main topic of the bachelor thesis is public space. The theoretical part conveys a view of the individual anchoring of public space and the aspects that occur in it. At the same time, the historical development of the town of Telč, in which the analysed place addressed in the practical part is located, is briefly described. Finally, the theoretical part is supplemented by individual qualitative elements that must be considered when designing, analysing and reconstructing public space. The practical part deals with the analysis of the selected public space, where the place itself is delimited and gradually analysed, for example in terms of building height, greenery, furniture or surfaces.
|
|
|
Preparation of the certification of the quality management system of the university - department of foundry engineering
Slinčák, Andrej ; Potanko, Andrej (referee) ; Maradová, Karla (advisor)
This paper examines the issue of the quality management system according to the requirements of the standard ČSN EN ISO 9001:2016. The object of application is the Faculty Foundry of Brno University of Technology. The first part of the thesis consists of theoretical research. The said part presents the historical development of quality management and current approaches to the quality management. This is followed by an analysis of the ISO 9001 standard where the individual requirements are defined and explained, so that they can be applied in the practical part. I have also added results from studies on the motives and consequences of implementing a quality management system according to the ISO concept. The practical part focuses on the analysis of the current state of quality management in the faculty foundry and the preparation of the standard requirements, so that later the foundry can obtain the quality management system certificate.
|
|
|
Optimising the working environment through Internet of Things technologies
Šebo, Martin ; Matej,, Havlas (referee) ; Sedlák, Petr (advisor)
This master’s thesis is focused on the analysis of the working environment of Stellnaris s.r.o. through the Internet of Things devices in terms of temperature, humidity, air quality and noise. The aim of the thesis is to analyze and propose the optimization of the monitored premises so that the network elements (especially the active ones) run as efficiently as possible, their long lifetime is achieved and also so that the comfort of the persons present in the premises is achieved in case of work performance. The subject of this work is not the monitoring of the entire company premises, but only selected areas, which are specified in more detail in the chapter Analysis of the current state.
|
|
|
The Order Processing in The Selected Company
Urban, Dalibor ; Petříček, Aleš (referee) ; Milichovský, František (advisor)
The bachelor thesis deals with the course of the contract in the selected company PRAVAN, spol. s.r.o. On the basis of the information obtained, it describes its current situation, from the receipt of the order, through the entire production process, to the final dispatch of the finished product. The aim of the bachelor's thesis is to propose corrective measures that will lead to optimization of the order process in the company and minimization of delays in contract deadlines.
|
|
|
Tracking of graduates of secondary vocational schools
Nazarov, Džalal ; Liška, Roman (advisor) ; Veteška, Jaroslav (referee)
Regular evaluation of graduates' satisfaction with the school and the quality of education provided is one of the important tools of quality management in education. Through regular and targeted tracing of former pupils, it is possible to detect mismatches between education and labour market requirements, but also to identify facts that can improve the quality of school education and provide valuable feedback to school management. The thesis on "Tracking of secondary school leavers" is divided into theoretical and practical parts. The theoretical part describes the definitions and basic concepts related to this topic. These include, for example, concepts such as pupil and graduate, the education system in the Czech Republic, school climate and the influence of school climate on pupil satisfaction or factors influencing the choice of school. The aim of the thesis is to find out how former pupils are satisfied with the school they graduated from, the quality of education they received, how they evaluate the contribution of the education they received to their further studies and professional career and to translate these findings into recommendations for school management. The research questions can help us to achieve the aim of this paper. In the practical part of this thesis, the analysis of the...
|
|
|
Visualization of exit inspection of the production line for seats
Čambál, René ; Jirgl, Miroslav (referee) ; Sýkora, Tomáš (advisor)
This thesis focuses on the design of an output control system for the production line of automotive seats at Lear Corporation Seating Slovakia. The approach to line design is based on the principles of lean manufacturing, emphasizing efficiency, quality, and optimization of manufacturing processes. The main goal of this thesis is to create software and HMI (Human-Machine Interface) visualization for virtual testing in the pre-series phase of the project and subsequent real-world use by individuals in the manufacturing environment. This approach enables effective identification and resolution of potential issues and optimization of manufacturing processes in the early stages of development. Additionally, attention is given to the process design of the line to achieve an optimal balance between speed, precision, and flexibility. The proposed line design aims to maximize manufacturing efficiency, minimize waste, and ensure high product quality. The overall outcome of this thesis represents a comprehensive and integrated approach to the design of a conveyor line for automotive seats, serving as a model for future projects in the automotive industry.
|
|
|
The influence of nitrogen fertilization on the wheat quality
DVOŘÁK, František
The theme of this Diploma's thesis was wheat grain quality parameters as a function of nitrogen fertilization. For this purpose, four varieties of winter wheat were chosen (Crossway, Megan, Kalbex and Bonanza) and small scale experiment was coducted on the grounds of the South Bohemian University in Ceske Budejovice. The monitored indicators were the quantity of ear per m2, quantity of grain in the ear, weight of thousand grains, yield of individual varieties, content of nitrogen substances, wet gluten content, sedimentation value and falling number. The nitrogen fertilization rates were set as follows: 50 kg.ha-1, 90 kg.ha-1, 120 kg.ha-1.
|
|
|
Czech Agriculture Food Inspection Authority Annual Report 2023
Státní zemědělská a potravinářská inspekce
Annual report includes these chapters: introduction by Director General, control activities, laboratory activities, certification, legislation, cooperation with other public bodies and institutions in the Czech Republic, quality management systém, international relations, public relations, human resources, financial management report, conclusion.
Fulltext:  PDF
|
|
|
Design Process Management of the Order of the Chosen Portfolio of the Organization
Kadlík, Vilém ; Juřica, Pavel (referee) ; Jurová, Marie (advisor)
The bachelor thesis focuses on the order management process in Keestrack s.r.o., a company that manufactures mobile sorting and crushing machines. The first part deals with the introduction of the company and then in the second part the theoretical background of the issue is presented, where we find explained concepts related to production, quality and process. The third part is an analysis of the current state of the art based on the theoretical part. In the last part, the results are interpreted and suggestions are made to improve the current situation of the company.
|
|
|
Implementing of SPC into production process
Letáček, Jiří ; Koška, Petr (referee) ; Fiala, Alois (advisor)
This graduation thesis is concerned with implementing the SPC (Statistical process control) to the process plan. The aim of this thesis is an analysis of present status of manufacture laths bending and a selection of useful methods, which is possible to apply in a company processes. The main reason for SPC implementation is continual improvement of quality in manufacturing concern. The theoretical part of thesis consist of bending description, control of process quality, quality control instruments and errors in measurement. In practical part is described an actual status of manufacture and a solution of query.
|
guest ::
