|
|
Multifunctional apartment building
Raimundová, Kateřina ; Bochníček, Vojtěch (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor's thesis is the development of a project for the realization of a multifunctional residential building in Třemošnice. It is a five-storey building with one underground and four above-ground floors. It is a detached building set in gently sloping terrain. The underground level is used as a mass garage and there are bicycle storage room and the building´s technical facilities. The first three floors fulfil the function for housing and there are a total of 10 housing units (1x1+kk, 3x2+kk, 4x3+kk, 2x4+kk). The fourth floor has a café with an outdoor terrace. Vertical supporting structures in the above-ground floors are made of Porotherm ceramic blocks, the underground part has supporting walls and columns of reinforced concrete. Horizontal supporting structures consist of reinforced concrete monolithic plates. The foundation is a foundation board, only the base strips are designed at the door. The roofing of the building is designed as a flat vegetation extensive roof. The terrace in the 4NP is also designed as a single-sheathed flat roof with a layer of wood-plastic planks. The whole object is insulated with the contact insulation system ETICS. The design also includes thermal engineering assessment, acoustic assessment, sun assessment and fire safety solution.
|
|
|
House
Tran Qui, Sang ; Kacálek, Petr (referee) ; Mohelníková, Jitka (advisor)
The bachelor thesis deals with the topic of a detached house design including project documentation of the construction process. The detached house design consists of two parts - the design of the detached house itself and the design of business premises. The building discussed is situated on flat land, there is no cellar and there are two above-ground floors. Also, the detached house is built on concrete footings. Whereas vertical perimeter structures are designed to be built from the Porotherm system, the horizontal ones, on the other hand, are to be built from reinforced concrete monolithic plate. The roofing of the discussed detached house contains a flat roof with coating waterproofing and with a flat green roof. The drawing parts and designs were created with the Autocad and Archicad programmes.
|
|
|
Detached house in Ivanovice
Olšovská, Natálie ; Kacálek, Petr (referee) ; Petříček, Tomáš (advisor)
The subject of the bachelor's thesis is the creation of project documentation for a detached family house with an business premises. The family house is planned for a family of five members. The family house has one underground and two above-ground storeys. The entire structure is based on foundation strips. The vertical perimeter structures are designed from the POROTHERM system and the horizontal structure as a reinforced concrete. The roof of the family house is a combination of a pitched gable roof above the living area and a flat vegetated roof over the business premises. All drawings were made in the Archicad program.
|
|
|
Detached house in Svinošice
Nováková, Pavlína ; Kacálek, Petr (referee) ; Petříček, Tomáš (advisor)
This bachelor thesis focuses on the development of project documentation for a detached house with a parlor in Svinošice, Czech Republic. The single-family house sits on a flat plot within the village’s built-up area. The design incorporates a partial basement and two floors above ground. The structure is based on basic passports and the horizontal load-bearing structures are made of reinforced concrete. The roof system consists of a combination of a flat roof and a gable roof. The footprint of the building is 315 m2.
|
|
|
Family House with Workshop
Klimeš, Adam ; Zichová, Barbora (referee) ; Košíčková, Ivana (advisor)
The subject of the bachelor's thesis is the project documentation of a family house with an establishment located in Brno, Soběšice. The shape of the house is designed in an L-shape. The house has two floors and a basement. The house is divided into two parts: a residential area and an office. There are two main entrances leading to the residential part and the establishment, and two side entrances. The structural system of the building is designed as a wall system. The house is founded on strip foundations. The roof structure is designed as a flat roof, and the roof above the living room is designed as a green roof.
|
|
|
Family house with office
Křičenská, Michaela ; Pobucká, Slávka (referee) ; Sobotka, Jindřich (advisor)
The topic of this bachelor thesis is the project documentation of a detached house with a business premises – an office. The house is designed in the outskirts od Chrudim. The house has two above-ground floors with a residential attic, it is partly under the basement. The building is covered with a gable roof with a wooden truss. The garage adjoins the house from side. It is designed for two passenger cars. It is covered with a vegetation roof. The house is based on foundation strips made od plain concrete. The main entrance is oriented from the north side, the entrance to the premises is possible separately from the west side or access is possible from the house.
|
|
|
Detached house with a workshop CABAS
Novák, Jakub ; Vaněk, Vojtěch (referee) ; Jelínek, Petr (advisor)
The main topic of this bachelor’s thesis is the development of a construction project at the level of construction documentation for a family house in accordance with applicable legislation. The objective of the thesis is to design and describe the proposed layout of the building, appropriately choose the construction system and materials, address the site's integration into the terrain considering the current state of the plot, and respect the surrounding development. The basis for the work was the municipality’s zoning plan, the real estate cadastre, and a geological map. The new building will be located on a flat plot in a quiet and new part of the village of Městec Králové. The proposed family house is a two-story structure without a basement, designed for the living needs of four people. The project focuses on creating a functional home with optimal use of space and separation of different zones. The construction system is wall-based. The exterior walls are made of ceramic blocks with external contact insulation. The roof of the second floor is designed as a flat green roof with an attic. On the first floor, there is a communication and social zone, which includes the living room, dining area, kitchen corner, and a business area featuring a pedicure salon. The second floor comprises a separate quiet zone with children's rooms and a bedroom, along with a storage room and a study. Both floors have a bathroom with a toilet, with the bedroom having an en-suite bathroom with a toilet.
|
|
|
Apartment building
Strakoš, Lukáš ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The bachelor thesis on the topic Residential house elaborates the project documentation for a new building of a residentail house with a business premises. The residential building is designed as a fully basement with one underground and three above-ground floors. In the underground floor there is a technical room and a cellar. On the first floor there is an office, an apartment for a person with limited mobility and orientation and a residentail unit. On the second and third floors are a total of 6 residential units. The building is designed as brickwork made of ceramic cut blocks, only the basement is made of hollow blocks filled with prescribed concrete and reinforcement. The foundation structures are designed as concrete strips. The staircase and ceiling structure is made of monolithic reinforced concrete. The roofing of the building is by means of a single-skin flat roof. The house is insulated with a contact insulation system.
|
|
|
Detached house with a workshop
Kynclová, Eliška ; Vaněk, Vojtěch (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor´s thesis is design documentation for construction of family house with parlor. House is designed for family of five members. The family house is located on a flat plot. The building has ground floor and basement. The building has a partial basement with two above-ground floors. The object is based on basic passports. The vertical perimeter structures are designed from the Porotherm system. Horizontal load-bearing structures are made of reinforced concrete. Roof construction of the object is composed by flat roofs and shaped roof. Drawings were worked out in software Archicad.
|
|
|
New building family house with shop
Janoušková, Dominika ; Horálek, Jiří (referee) ; Benešová, Romana (advisor)
Project new building family house with a shop in Prosetin. The building has a basement and two floors. The house is designed for four-five member family. The walls in the basement are formed by blocks BEST, the vertical construktion in floors are made of blocks Porotherm. The horizontal construktion is made of girders POT and the inserts MIAKO. The last ceiling is wooden. The roof structure consists of a wooden frame.
|
guest ::
