|
|
Design of a milling fixture for four-axis CNC trimming of composite parts
Hibš, Dominik ; Slaný, Martin (referee) ; Zouhar, Jan (advisor)
This thesis deals with the design of a milling fixture for trimming of folding propellers for the company Mejzlik Propellers s.r.o. Firstly, an adequate HAAS DM-2 machine and UniCut Dron milling tool were selected. The cutting force was then quantified at 9.2 N. Once the cutting force was established, the clamping surface could be designed and the clamping force set at 317.3 N. After considering several fixture options, the final design was selected. The selected design was used to program the CNC machine in Fusion 360. A technical and economic evaluation followed, when the total price of the product was 41,671 CZK and the cost of machine cutting one propeller was 32.60 CZK, while the cost of manual trimming was 29.10 CZK
|
|
|
Solution drilling technologies and clamping units
Adam, Jan ; Kubík, Roman (referee) ; Kalivoda, Milan (advisor)
This Bachelor's Thesis introduces drilling technology, construction of clamping for specific component and its examination in terms of technology and economics.First part of Bachelor's Thesis deals with technology of drilling and with instruments for drilling such as drills and reamers. Next is survey of particular types of drilling machines. Second part of this Thesis is about rules for construction of clamping units and their disposal. Analysis of componet for which is clamping unit constructed. Following by construction of drilling gauge,comparing of incidental times with using the gauge and without using the gauge and finally calculation of investment return in to clamping unit.
|
|
|
Streamline production of sewing machine parts
Švec, Michal ; Trčka, Tomáš (referee) ; Kalivoda, Milan (advisor)
The diploma thesis deals with the proposal of more effective production process of the feeder holder component in the company MINERVA BOSKOVICE, a.s. The first part of diploma thesis dedicated to the technologies which are used in the production of components. The second part deals with the analysis of the component and its current production process. The third part contains a proposal for a new production process, which contains a description of the machines used for production, a new jig, selected tools, mechanical calculations and technological method. The last part evaluates the current and newly proposed variant of production with their comparison.
|
|
|
Proposal of the modular support equipment for the CubeSat integration
Kukla, Ondřej ; Lazar, Václav (referee) ; Vaverka, Jan (advisor)
Cílem diplomové práce je vytvořit konstrukční návrh modulárního integračního přípravku CubeSatů. V textu níže jsou obecně představeny CubeSaty společně s komerčními přípravky pro jejich integraci. Finální konstrukční řešení bylo zvoleno na základě porovnání zvolených parametrů a informací zjištěných z průzkumu trhu. Návrh byl úspěšně vytvořen a k práci jsou připojena 3D data a výkresová dokumentace.
|
|
|
Construction of equipment for thin walled L-profiles instability testing
Polčák, Marek ; Vaněk, František (referee) ; Horák, Marek (advisor)
Bachelor’s thesis deals with the loss of stability of axially loaded thin-walled aluminium profi-les, which make up an important part in the aircraft structures. The loss of their stability is tes-ted by the compression test, which is used to determine the buckling load. Compression test may be influenced by many factors, which are related to the fixing to the testing machine. The aim of the thesis is to design a fixture, which would fix a specimen to the testing machine and improve the results of the test.
|
|
|
Design of Data Acquisition Equipment IMC Fastening System in the Car
Černý, Martin ; Jeník, Radomír (referee) ; Ramík, Pavel (advisor)
Devices for measuring the dynamic load and vibration of certain parts of the bodywork or parts of other parts of the vehicle are made using accelerometers and measuring instruments IMC. It must be simply installed into the interior of the vehicle so that it is not necessary to remove any parts of the interior and to avoid damage to all parts of the interior. The preparation must also withstand the considerable dynamic load generated by the harder operation tests.
|
|
|
Design of a device for the analysis of hydraulic damper valves
Čupr, Martin ; Jeniš, Filip (referee) ; Macháček, Ondřej (advisor)
The bachelor thesis deals with the design of a device for a stand-alone hydraulic damper`s valve analysis. The main goal is to construct a jig, where the valve is firmly attached, so it can be exposed to high-pressure oil flow, simulating the real conditions in a damper. In this thesis, the valves of the two specific hydraulic dampers were chosen. The jig was designed to enable testing of these valves loaded by operating pressure up to 32 MPa. As the jig is universal, it allows testing of any similar-sized valves. Moreover, it provides the possibility to test two valves at the same time and analyse their cooperation. The jig presented in this thesis was designed for the development purposes. However, the same principle can be used as a control jig in serial manufacture. This approach enables to measure both the valve`s pressure drop and the current volumetric flow rate of oil. Consequently, all the main characteristics of the valve which are derived from these two quantities can be invetigated. When the cooperation of two valves is analysed, the ration between volumetric flow rates in each valve can be determined.
|
|
|
Biological Signal Generator
Kadeřábek, Jan ; Čech, Petr (referee) ; Sekora, Jiří (advisor)
This semestral thesis describes signal EKG, it’s origin, evaluation and device for his generation. After identification with standard course of EKG signal, was such as signal created in program language Matlab. It’s consisting of 10 sinus courses, where each of them has it’s own frequence, start phase and amplitude. Each of this part of EKG signal is beat frequence variant. Rates of it’s durations and sizes were fixed from medicin literature. Such as created program were rewritten to program language C and is basic of main program, which control signal processor. Finally was propoused preparation, which will be generated this signal. Outcome of this thesis is teoretic treatise about signal EKG, created program for generation of this course include part control and machine doing realization of biological courses.
|
|
|
Bonding of composite materials in precise applications
Schubert, Vojtěch ; Zouhar, Jan (referee) ; Kupčák, Radim (advisor)
This work is focused on the bonding of composite materials. Related research dealing with technology of production and bonding of these materials was additionally conducted. Practical part of this thesis was set to find out what the optimal bond line thickness was for the bonding of the composites. Thus, the strength of single-lap joints (SLJ) in series of various bond line thicknesses was therein tested. A model of samples (and design of their production by wet lay-up) for the experiment is also provided in this thesis.
|
|
|
Standardized procedure of the machine tool adjustment for change of the machined part type
Nedoma, Tomáš ; Tuna, Jaroslav (referee) ; Lošák, Petr (advisor)
The bachelor thesis at hand is dealing with standardized procedure of machine adjustment in process of machined rail type change in Bosch Diesel s.r.o. Jihlava. In the thesis, procedures of external adjustment of preparations that clamp workpieces into machining centers and overall procedure of machine adjustment are described. The elaborated standardized procedures are included in instruction manuals, which are used by workers of the company for machine adjustments. These “manuals” shall minimize occurrence of defective steps in the adjustment process and prevent their interchange. Mistakes based in incorrect procedure of the workers lead to prolongation of the time necessary for machine adjustment in process of change of machined type by up to hundreds of minutes per month. Bosch Diesel s.r.o. has adopted these instruction manuals and thanks to them shall save couple of tens of thousands euro per year.
|
guest ::
