|
|
Apartment Building in Žďár nad Sázavou
Fiala, Jakub ; Nespěšný, Ondřej (referee) ; Pěnčík, Jan (advisor)
Goal of this bachelor thesis is creation of a project documentation of an apartment building in Žďár nad Sázavou. Chosen location is in a newly constructed side of the city called Starý dvůr nearby the city center. The area is appointed for housing. This apartment building is designed with one underground floor and four regular floors. The foundation is made of concrete strips. The traverse wall system is composed of brick blocks and the ceiling is made from reinforced concrete. The ventilated facade is insulated with the ETICS system. The roof is designed as a single-layer extensive green flat roof. In the cellar a technical room and storage cubicles are located. A barrier free entrance to the first ground is from the parking lot in the northern side of the building. There are overall ten apartments. Most of the apartments comprise balcony or terrace. Around the building is designed roomy garden with a gazebo and kids playground.
|
|
|
Recording Studio with Accomodation
Fiala, Jakub ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The main aim of this master’s thesis is to design a recording studio in a place of an abandoned agricultural building in a small village called Radešín. The thesis is structured into three parts. Goal of the first part is creation of a design documentation of architectural and structural designs. The building will consist of two storeys, a cellar and a gable roof. The most used building material will be reinforced concrete. Recording studio will offer three recording rooms accompanied by a large control room. Accommodation will include five apartments for ten inhabitants and a common room with kitchen. The second part is focused on design of selected building services. The building will be equipped with an air-to-water heat pump and wood chip boiler for heating. A mechanical ventilation with heat recovery will provide fresh air. Heat pump will also work as a cooling source. Furthermore, designs of the rainwater treatment, water heating, lightning and photovoltaics on the roof are included. The third part revolves around the matter of room acoustics. It describes basic knowledge and terminology of this field, which are then used to solve reverberation. I dealt with three variants – initial state, state with additional dampening and state with additional dampening with movable acoustic panels. One calculation was made in Microsoft Excel, the other one with help of room simulation in Odeon. Finally, I compared these two methods.
|
|
|
Sports Center
Buchtelová, Aneta ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The contents of the diploma thesis is the elaboration of project documentation for the construction of a sports center. It´s a building with three floors, ie. two floors and basement. The building has a partial basement. In the building are sports facilities for fitness, squash courts, wellness, office spaces for employees and management. On the ground floor there is also a canteen with operating facilities. The main entrance is located on the west side of the proposed parking lot. The building can be entered on the south and east side of the building through the canteen and a side staircase. A total of seventy-eigth parking places are designed in the center, four of which are for people with reduced mobility and orientation. The building is designed of ceramic bricks with a two–way construkction system and insulated ETICS system. The facade of the building is partly contact and partly ventilated. Elements for green walls are used on the walls. The building is covered with a flat green extensive roof.
|
|
|
Congress centre Humpolec
Šrůta, Otto ; Pospíšil, Jaroslav (referee) ; Brzoň, Roman (advisor)
This thesis describes the design and processing of the convention center. The proposed house is located at the top of the square of Humpolec in the area designated for the construction of public facilities. The building consists of a basement, where there is a garage for the car owner and stores food for the kitchen. On the first floor there is a reception, restaurant and facilities for the kitchen. On the second floor are conference halls. In the third and fourth floor is accommodation for guests. The restaurant is designed for 55 people inside + outdoor terrace can seat about 30 people. Conference halls are designed for 90 people. Accommodation is for 28 guests. Outdoor parking is for 40 cars. Perimeter bearing walls are made of reinforced concrete + insulation. Interior bearing walls are made of reinforced concrete, interior non-bearing brick walls HELUZ. The ceilings are made of overstretched Spiroll panels and boards reinforced cross. For ceiling is plasterboard ceilings. The roof home is designed as a single-layer flat. Heating is effected by the heat pump. Wooden windows are six-chamber, aluminum doors. There is a staircase and an elevator. The proposed facility is designed wheelchair.
|
|
|
Construction technological phase of roofing the building for social housing
Něnička, Roman ; Vlčková, Jitka Laura (referee) ; Diaz, Yvetta (advisor)
The bachelor thesis is describing the constructional phase of roofing a building for a social housing. It deals with the design of the load-bearing structure, installation of roofing elements, laying of roof covering and other parts of the roof. The bachelor thesis consists of covering and summarizing technical report, site plan including its estate road layout, bill of quantitities, technological regulation of a stage and balance of resources. It also delivers organization of construction, equipment of the building site, time schedule, design of the roof assembly and qualitative requirements and safety of work. It also includes a new design of the roofing in the lowered slope of the roof plane.
|
|
|
Family house with a coffe bar
Vokřál, David ; Partika, Radek (referee) ; Daněk, Lukáš (advisor)
The objective of this bachelor thesis was to create project documentation of a family house with a coffee bar. The study and project documentation for building permit were used as resources. The building is located the cadastre Červená Pečka on site 272/10 in Kolín district, in the Central Czech region. The property is situated in a moderate northern slope. Building will be partially sunk in the terrain. The family house is intended for residence of a 4 to 5 member family. Coffee bar is dedicated for 30 guests and 2 or 3 employees. Coffee bar and technical background is in 1.S., the habitable part of family house in 1.NP. Structural system is designed with standard brick technology with ceramic blocks. The building has a saddle roof and pent roof with a supporting structure from wooden lattice G-N trusses. The foundations are from plain concrete. The outcome should be complete documentation with drawings of the situation, 1.S, 1.NP, vertical section, horizontal section, section of staircase, drawing of ceilings, foundations, construction of roof, roof plan, views and drawings of details D1-D5, also including technical report, a list of products, fire safety design of building, heat-technical design of building and power label.
|
|
|
Multifunctional house in Uherské Hradiště
Kopecká, Lucie ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
The object of this master’s thesis is a newly-built mixed-use building in the town of Uherské Hradiště. It includes parking and office spaces, retail shops, and a coffee shop. The building is situated in a mildly sloping terrain near the town centre. It is a three-storey detached building with partial basement. The floor plan was created by joining several different-sized rectangles together. The mixed-use building is based on foundation pads and slabs. It is roofed with a warm flat roof and, above the first floor, with a green roof. The building consists of a cast-in-place reinforced concrete frame with columns and beams. The floor structure is composed of prestressed hollow core slabs. The external wall of the above-ground floors is made of hollow clay blocks and the basement external wall is made of permanent formwork. The wall of the lift shaft is built from reinforced concrete and the staircase is composed of precast reinforced concrete slabs. The external walls are insulated with contact thermal insulation system and in some parts there is timber cladding – ventilated façade with thermal insulation from glass wool. The thermal insulation of the basement and of the plinth is made of extruded polystyrene. The object is divided into several functional zones. On the ground floor there is a coffee shop, a copy shop, a stationery shop, and a bakery. On the first and second floors there are office spaces. In the basement there are technical facilities only. The main entrance of the object is from the northwest part of the plot. There the entrance to the car park is also located, situated to the northwest and southwest side of the plot. Bicycle stands and a place for recycling is also located there. Around the object there is a pavement from which there is wheelchair access to all of the functional zones.
|
|
|
Extension of the gym
Hykšová, Lenka ; Donaťák, Vladislav (referee) ; Donaťáková, Dagmar (advisor)
The thesis is focused on the design and preparation of project documentation regarding extention to the elementary school gym. Extension is indented rectangular shape. The building has two floors, without basement. The vertical structural system is Porotherm, horizontal structural system of reinforced concrete, the roof is gabled and pent formed metal roofing.
|
|
|
Sport-hotel Frýdlant
Bartoš, Jan ; Svoboda,, Petr (referee) ; Müller, Jan (advisor)
In my thesis I will deal with the draft project documentation for sport hotel. This object is located in the quiet southeastern part of Frydlant with city views and easy access to the nearby sports facilities. It is an object of part two storey and a basement. The building is set into the sloping terrain, so the underground floor extends on to the ground. The building is based on foundation walls and footings that are made of reinforced concrete. Load-bearing walls of the underground floors are designed as reinforced concrete. Ceiling structure of the building is made as reinforced concrete beam ceiling and in other structure parts as a crosswise reinforced concrete plate. Perimeter bearing walls and two floors, are designed from the acoustic sand-lime bricks Silk. External walls are warmed by a contact insulation system. Flat single shell roof was chosen over part of the restaurant. Double-layer roof with a supporting truss structures above the main part of the building. The building is divided into functional parts. Accommodation capacities are mostly on the second floor. On the ground floor there is a restaurant with a kitchen and space for staff. In the basement there is a functional part of the wellness and gym with common dressing rooms. The only entrance path allows convenient control of customers. The building is wheelchair accessible.
|
|
|
Hotel
Řehoř, David ; Bartolšic, Vít (referee) ; Matějka, Libor (advisor)
The objective of this thesis is to draw up the design documentation for the construction of a hotel. The hotel is situated on the edge of the golf resort Kaskáda near to Jinačovice. It’s a brick building with two above – ground floors and one underground. There is the staircase in the building that creates protected escape route. The perimeter wall is designed of ceramic bricks Porotherm T Profi. They are filled – in by mineral wool. The hotel is divided into three dilatational parts. There are 35 guest rooms in the hotel; two of them are barrier – free, in total 63 beds. In the ground floor there are entrance, reception, restaurant, bar, kitchen with the background. In the basement there are technical equipment, a fitness room, a wellness, changing rooms, washrooms and a bar. The roof of the hotel is flat. There is the terrace accessible from the apartments in the second floor above the restaurant.
|
guest ::
