|
|
Measuring system for analysis of pressure relations in spray lubrication device
Popelka, Michal ; Vaverka, Michal (referee) ; Nevrlý, Josef (advisor)
This thesis deals with the selection and design layout of the measuring system for the analysis of pressure and flow conditions in the lubricating system and a particular pressure and flow sensors. Sensors were selected according to suitability for use in these conditions of measurements (pressure, flow, etc.). Work also includes the review and selection of data bus for converting the output signal from the sensor to the evaluation unit (computer). It also includes selection of the measurement software to analyze the values arriving from the sensors into the measurement computer, find the optimal conditions for lubrication of wheel flanges of rolling stock.
|
|
|
Design of special purpose tool for sag measurement
Mejzlík, Jiří ; Vetiška, Jan (referee) ; Houška, Pavel (advisor)
The aim of the thesis is to design a special purpose tool for sag measurement. Three possible solutions are proposed, for each the production cycle time is calculated and its approximate costs are estimated. The best solution in terms of a trade-off between both key quantities is suggested. Next part of the work deals with the selection of suitable drives for the manipulator as well as of the other components for the whole electrical device. Finally, a possible automated control of the complete machinery, including the electrical wiring diagram, is presented.
|
|
|
Design methodology for the selection of basic components of linear machine tool axes
Král, Stanislav ; Dosedla, Michal (referee) ; Holub, Michal (advisor)
The aim of the thesis is based on specified parameters positioning units, which include stroke (1m, 2m, 4m), load (5kg, 50kg, 500kg), you place the position accuracy (0.04 mm) and dynamic (maximum attainable speed 1.5 m / s), proposals to build a ball screw, linear motor, a toothed belt and toothed comb. For selected variants of positioning units to design a 3D model of positioning units. The proposed variations to compare and define their advantages / disadvantages, techno-economic comparison, the limit values of individual designs, etc. The work includes a search drive in positioning units, design units with toothed belt, a toothed comb, ball screw linear actuator, a calculated message of individual proposals then 3D design options for the ball screw and linear motor including drawings and assembly drawings.
|
|
|
Structure and Use of the Measuring System for Research of Lubrication Device
Brhlík, Rostislav ; Omasta, Milan (referee) ; Nevrlý, Josef (advisor)
This work deals with an adaptation of the measuring system for the functional analysis of the lubricant divider. Within the new structural design, there were used manometers, flowmeters and dynamic scales to determine the properties of the lubrication system; data acquisition card and the appropriate software were designed too. The methodology of data measuring and analysis were also elaborated. The methodology is based on the experience from measuring, which was realized with the lubrication system OK - 02 from Tribotec Company. Finally, the cascade lubricant dividing system was designed. This is a newly designed flow divider with an innovative internal layout. The aim of the proposed measurement system is an optimization that will lead to effective dividing of lubricating mixture and applying the necessary amount of lubricant to wheel flange.
|
|
|
Wireless communication link analyzer
Dostálek, Jakub ; Burian, František (referee) ; Jílek, Tomáš (advisor)
The aim of this bachelor thesis is to design and implement a wireless communication analyzer in mobile robotics, using IPv4 protocol and Ethernet interface and to create correctly selected and expressed characteristics from the measured data, according to which the wireless communication channel can be further optimized for the best data transmission. To meet these requirements, a brief search of existing solutions was performed, their applicability was discussed and important parameters of the wireless transmission channel were defined, which will form the given characteristics. Furthermore, the actual design and implementation of a wireless communication link analyzer for previously specified required parameters, verification of its functionality on the transmission link with known parameters and automation of measurement and data evaluation was performed.
|
|
|
Interchangeable three-axis tool head for CNC portal milling machines
Balek, Jan ; Pavlík, Jan (referee) ; Marek, Jiří (advisor)
This master’s thesis is focused on design of interchangeable three–axis tool head for CNC portal milling machines. The first part is devoted to a survey of the current state of technology and the representation of individual types of heads on the market. Furthermore, several possible variants of construction are proposed and the most optimal one is selected using multicriteria analysis. It is created a 3D model of selected variant, drawing documentation and technical calculations.
|
|
|
Design of a headstock for a machine tool
Sehon, Tomáš ; Marek, Jiří (referee) ; Hermanský, Dominik (advisor)
This master’s thesis deals with design of a headstock for a machine tool. Theoretic part of this thesis provides basic description of a horizontal machine tool. Further it is dedicated to description of a headstock of machines with extensionable work spindle. In a design part firstly optimal variant is chosen by using multicriterial analysis. Necessary calculations were done and chosen variant was developed. Design is realised by 3D CAD model and drawing documentantion.
|
|
|
Experimatal Analysis of Windshield Wipers Motors
Dočekal, Martin ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
The work deals with the methods of measurement of small DC motors, especially motors used for drives wiper’s mechanisms. Furthermore, describing the internal structure and function of wiper’s engines. Measurement of these engines is carried out mainly dynamometers which is described in more details in the work. However, measuring systems consist not only from the dynamometer but also many other components such as controllers, software for testing engines, various stands, temperature and speed testers, and many others. These components are taken into account, when selecting the most suitable measuring system. There are also various systems analyzed and compared in terms of both technical and economic parameters, but also in terms of measurement options, such as immediate viewing characteristics on a PC monitor of the system assembly, the possibility of measuring the friction torque, efficiency, heating, etc. In conclusion, there is a recommendation of measuring system which I chose as the best option according to its parameters.
|
|
|
Water mixer
Damajka, Štěpán ; Glos, Jan (referee) ; Veselý, Libor (advisor)
The aim of this bachelor thesis is to build device for mixing warm and cold water. Water mixer consists of a temperature sensor and flow sensor. Actuator devices are two-way diaphragm solenoid valves and three-way valve with servo-engine. Thesis focuses on identification system and design of a suitable controller.
|
|
|
Determination of Q/h characteristics of spillways of the sluice chamber of the Brno-Modřice WWTP in conditions of influenced flow
Škrancová, Markéta ; Ježek, Jiří (referee) ; Žoužela, Michal (advisor)
The work deal with the measurement, processing and analysis of Q/h characteristics of the sluice chamber in the wastewater treatment plant on a physical hydraulic model in the conditions of influencing the overflow phenomenon by the groundwater level. Based on the achieved results, a measuring system has been projected in the area of the sluice chamber to measure the flow and flow rate of lightened water into the Svratka river. The measurements on the model were performed in the premises of the Laboratory of water Management Research of the Institute of Water Structures of the Faculty of Civil Engineering of Brno University of Technology by the author of this work. The results of the diploma thesis is a flow chart describing the calculation procedure used to determine the immediate flow, on the basis of which a new software of the evaluation unit of the measuring system was realized.
|
guest ::
