|
|
Mixed-use Building
Fibikar, Tomáš ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
This Master’s thesis deals with the design and elaboration of project documentation for the construction of a multifunctional building in Pardubice. The building is located on plots No. 2426/35 and 2426/36, in the cadastral area of Pardubice. It is located in an area close to the city center. There used to be barracks in this place. The outline of the house is "bitten" L-shaped. The building consists of civic amenities, where there are Alza showrooms, musical instrument showrooms, cafes, rehabilitation centers and massage centers. Another part are offices. All floors are barrier-free. The building has no basement. The main arterial communication of the house passes through the hall, which goes diagonally through the building. This corridor connects the individual establishments, technical facilities, stairs, elevator, and parking lot behind the building. Movement between individual floors is ensured by a monolithic staircase and an elevator. The building also includes a parking area for cars, access road and another garden with space for outdoor seating. The building is based on strip foundation and pad footing foundation made of plain concrete. The load-bearing structures are made of ceramic and brick blocks and columns. The building has a longitudinal compositional system. The ceilings are designed as reinforced concrete slabs. The exterior walls are plastered with thermo-insulating plaster. The walls in the roof entrance section are contact-insulated with mineral wool. In the place of the plinth, the insulation is made through extruded polystyrene. The roofing is designed as a single-skin flat roof with rainwater outlet/roof outlet. Next to the land there is a local road.
|
|
|
Design and implementation of the sensor network technological sample for diagnostic purposes
Venglář, Vojtěch ; Krejsa, Jiří (referee) ; Věchet, Stanislav (advisor)
The purpose of this thesis was to design and implement a prototype of binary topology sensor network (as proposed in patent CZ 306855 B6). Important part was evaluation of this type of network. A survey of commonly used sensors and technologies used in intelligent buildings and sensor networks was created. The gathered information was used for the evaluation. A network for analog signal transmission was designed and implemented (including all the elements) based on the patent proposal. A number of configurations was proposed to test the network features. Measurements were performed using all the proposed configurations. Two devices were used for the measurement: STM32 Nucleo F303K8, MyRIO (by National Instruments). Looking at the measured data, we can tell that the consistency is good enough to declare this network functional as a concept. However, we cannot recommend this type of network for high precision applications at the time, due to some accuracy and consistency issues. We have also detected relatively significant noise in the data. That could be caused by many external influences, partly by faulty design of the components.
|
|
|
Multifunction sports hall
Nacházel, Jakub ; Burianová, Lenka (referee) ; Smolka, Radim (advisor)
This master’s thesis deals with the design documentation multifunction sports hall. The building is situated in the region in the Vysočina village Humpolec, cadastral district Humpolec. The building is designed as a prefabricated skeleton, where the vertical load-bearing structures are designed from the prefabricated skeleton of PREFA BRNO and filling and partition walls of the structural system POROTHERM and BTB fittings. Horizontal structures are formed by the supporting elements prefabricated skeleton system of PREFA BRNO and ceiling panels SPIROLL. The main single-storey multifunction hall is roofed with wooden trusses of curved from glued laminated timber and purlins carrying roof deck. The other part of the building is covered with flat single-ply roofs. The building is divided into a main single-storey multifunction sports hall and an outbuilding with facilities for athletes and spectators about two floors above ground and a third technical floor. The building is solved as barrier-free.
|
|
|
Web Application for Thesis Management
Stodolová, Martina ; Neuwirth, Bernard (referee) ; Dydowicz, Petr (advisor)
This master‘s thesis deals with the design and implementation of a web application for the management of diploma theses for students and their supervisors. It defines theoretical starting points for web applications. Based on requirements and analysis of current solutions, it provides a proposal for application, description of implementation, economic evaluation and summary of benefits.
|
|
|
Office Building
Žák, Jan ; Burianová, Lenka (referee) ; Smolka, Radim (advisor)
The Master’s thesis Office building is compiled in the form of project documentation witch comprises all the requisites required by current regulations. The designed building is placed on the sites numbered 2589/1 in Litomerice. This is a new building withoutbasement with four floors. The house is rectangular in plan, built of precast reinforced concrete frame system with infill masonry and roofing flat roof monotube roofing.
|
|
|
Sports center with restaurant in Holěšov
Fridrich, Michal ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
The diploma thesis called ,,Sports center with restaurant in Holesov” is written in form of implementing project documentation and contains all requirements according to current laws. Proposed object is located on a plot 461/1 in Partyzanska street, Holesov. The object is separate building situated into north part of the plot. The designed building has two floors, no basement and is covered with flat roof. Foundations of the building are design as foundations strips with concrete slabs under column. Vertical carrier system, non-carrier constructions and separating constructions of the building contain ceramic clay block Porotherm. The carrier system is supported by reinforced concrete. Ceiling construction is made of ceiling panels Spiroll. The flat roof contains heat-insulation wedges and roof drains and overflows insurance for drainage. Main walls are covered with contact insulation system and the visual part of facade is made of facade blocks Cembrit Solid mounted to wooden grate which are attached to metal anchors. The object is divided into two main parts with shared entrance. First part is located in the ground floor and is designated for restaurant, bowling centre and back office including kitchen and bar. The other part of the building is designated for sports use. The ground floor contains two squash courts with facilities and first floor is divided into parts prepared for a gym and group lessons like spinning. This separate part has its own changing rooms and toilets with showers. The designed object is barrier-free. There is also a parking with 65 lots for vehicles. Four of them are designated for disabled visitors.
|
|
|
University Residential Centre
Dvořák, Petr ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
University Residential Centre is the theme of this Master's thesis. The aim was to create a building, which will provide comfortable living and learning to students. The building has three floors - there are student apartments for one to four people in the upper two floors. The ground floor is dedicated to educational purposes. It contains a library and two lecture halls. From the constructional point of view, the structural system is a reinforced concrete skeleton. Main vertical elements are columns and main horizontal are two-way reinforced slabs. Utilization of glass facade and innovative type of thermal insulation can be found interesting.
|
|
|
Program for inovation of the SORT control system
Šulc, Martin ; Kváš, Marek (referee) ; Zezulka, František (advisor)
The analysis for the extension of the control system and proposal of controlling program for surveillance cameras and related theoretical analysis necessary for understanding problems. Proposal communication protocol to access all functions via TCP/IP communication. Subsequent protocol implementation into control program and a programmable controller. Programming application with a user interface for camera control and basic image processing. The program also represents the server for TCP/IP communication with clients over the proposed protocol. The proposed application has to fulfill high pretensions of data streaming from cameras. Extension of the existing control system of the telescope, dome and other systems. The addition of analog measurement and control of digital inputs and outputs. Furthermore, control of stepper motors to control focusers. The embedded communication protocol will be expanded of the new instruction.
|
|
|
Microbrewery with restaurant
Mikasová, Natálie ; Kacálková, Lenka (referee) ; Kacálek, Petr (advisor)
The subject of the master’s thesis is the preparation of project documentation for construction. The goal of the work is the design of a microbrewery with a restaurant. The building is designed in the outskirts of the village of Dymokury, Nymburk district in the Central Bohemian region. It is a detached building with 3 floors, two above ground floors and a partial basement. The building is based on foundations made of monolithic concrete, the perimeter masonry in the basement and the ceiling structure are made of reinforced concrete. The perimeter structures of the above-ground floors and the internal load-bearing masonry and non-load-bearing partitions are made of ceramic masonry, and the building is covered with a single-layer flat roof with extensive greenery. The building has premises for a microbrewery, premises for a restaurant (kitchen, storage of raw materials) and catering premises. In addition, the building has facilities for employees with hygienic facilities, hygienic facilities for restaurant guests, a technical room and an air conditioning machine room.
|
|
|
Planetarium
Sokolová, Eva ; Šmak, Milan (referee) ; Barnat, Jan (advisor)
The master’s thesis object is to create a design of a load carrying steel structure planetarium. Its ground plan dimensions are 36,1 x 49,0 m. The planetarium hall’s roof is designed with system of trusses and purlins. The projection hall’s roof consists of ribbed cupola with radially arched ribs. The stiffness of the whole construction is ensured with bracings. The walls of the whole object are composed of columns, rails and bracings.
|
guest ::
