|
|
Peristaltic Pump Controll Unit
Charvát, Jakub ; Kopečný, Lukáš (referee) ; Ligocki, Adam (advisor)
The work deals with the problematic of peristaltic pumps and it collects theoretical background information of this topic. The primary goal of the work is the implementation of peristaltic pump and the implementation of protection against equipment damage by overpressure. The overpressure evaluation system in this thesiss on the principle of current measurement of the motor pump. In this work, this premise is successfully tested and applied to the device. Another goal of this work is to create a desktop application that will monitor and control the pump. he data between the application and the device were successfully transfered by the MQTT communication protocol. The communication between the computer and the pump has been tested successfully.
|
|
|
Bushing-type current transformer 25 kV, 400/5/5 A
Bálint, Zoltán ; Vávra, Zdeněk (referee) ; Vaněk, Jaromír (advisor)
The aim of this master’s thesis is the design of a double-core bushing-type current transformer. This appliance is intended for measuring and protection of high-voltage distribution systems of the internal type for the highest system voltage of 25 kV. The master’s thesis is divided into four parts. The first part describes the function of the current transformer. The next part deals with the analysis of the phasor diagram and errors of the current transformer. The major part of the thesis deals with the design of the protective and measuring core. The last part describes the 3D model of the bushing-type current transformer.
|
|
|
High resolution ammeter
Honek, Marek ; Roubal, Zdeněk (referee) ; Steinbauer, Miloslav (advisor)
A transmission electron microscope is a device operating on a similar principle as an optical microscope. The fact that electrons wavelength is much shorter than the wavelength of photons is used to obtain huge magnifications. Glass lenses commonly used in the optical microscope are therefore replaced by magnetic coils in the electron microscopes. A magnetic field is directly proportional to the current passing through these coils. It is important to the current supplied to the coils to be as stable as possible to achieve high resolution. The goal of this thesis is to analyze usable current measurement methods and to design a current stable measuring device with a resolution of 1 ppm.
|
|
|
Design of control unit for two-wheeled self-balancing vehicle
Bastl, Michal ; Klimeš, David (referee) ; Chalupa, Jan (advisor)
This diploma thesis is a part of a project of two students. The aim of the project is to design safer electronics for the unstable balancing vehicle HUMMER and implementation of advanced diagnostics and fault detection. In the first part of the project we analysed the original vehicle using the FMEA analyse and created a new concept of the vehicle. The second part of the project describes a new hardware. I designed and tested the power electronics, control unit and supplies. The outputs of the work are prototypes which allow testing a new concept.
|
|
|
Contactless Wiegand Effect DC and AC current sensor
Štefánek, Martin ; Szabó, Zoltán (referee) ; Kubásek, Radek (advisor)
The paper describes the types of magnetic sensors, which are used for measuring magnetic fields. The document is divided into chapters, which describe Wiegandův sensor and its implementation into the magnetic sensor in this document is designed magnetic circuit design for this sensor. The work evaluates the progress in the design of contactless ammeter that measures AC and DC current via Wiegand effect. Experimental verification principle and its function for DC current is described in the penultimate chapter.
|
|
|
Current Transformers and Current Sensors Confrontation
Popek, Jiří ; Bok, Jaromír (referee) ; Topolánek, David (advisor)
Current transformers and current sensors are devices which are mostly used for current measurement in high voltage systems. This devices transform measured currents to range which are workable for measurement and protection devices. Current transformers have been using for current measurement since electric system was built. Current sensors are using for measurement after applying digital devices in their secondary circuits. Theoretical part includes fourth and fifth chapter. These chapters contain construction analysis and characteristic points for both devices. Practical part is in chapter six. This chapter consists results from laboratory measurement. Results are used for verification with theoretical part of the thesis. Accuracy class in nominal range and progress for measurement error in overcurrent range was verified for tested devices. Conclusion of this thesis comparing properties and summarises results from laboratory measurement.
|
|
|
Design of a current data logger for LPWA sensors
Mikulášek, Michal ; Možný, Radek (referee) ; Štůsek, Martin (advisor)
This Master thesis deals with the design and construction of a measuring device for measuring and the current consumption logging of sensors using LPWAN (Low Power Wide Area Network) technology. The theoretical part of the thesis firstly summarizes selected LPWAN technologies. Selected technologies, namely: LoRaWAN, Sigfox and Narrowband IoT (NB-IoT), are described more in detail. Further, the current measurement techniques are briefly discussed. The main focus is given to the current shunt measuring methods. The second half of thesis describes procedures conducted during the design and construction of a measuring device. The current measuring is based on the current shunt circuit complemented by the voltage amplification circuit, whose output is subsquently converted into digital form using an AD converter. The thesis describes in great detail the procedures for selecting individual components and important processes used in design of printed circuit boards. An integral part of the measuring device implementation is the design and implementation of control software, which is described in detail and supplemented by workflow charts underlining the entire description. The implementation of the entire measuring device is completed by the design and implementation of the cover box using 3D printing technology. Finally, the specifications of designed device are briefly discussed based on the limits of the used components.
|
|
|
AC and DC current sensors
Zimek, Alois ; Huták, Petr (referee) ; Patočka, Miroslav (advisor)
The aim of this master’s thesis is to focus on analysis of a current transformer with feedback correction of measuring error, make an AC current sensor and verify its qualities experimentally. The measuring scale of this transformer is I = 0 to 100A, f = 50Hz.
|
|
|
Testing parameters of stepper motors at different microstepping mode
Műller, Jakub ; Chalupa, Jan (referee) ; Klimeš, David (advisor)
This thesis deals with design and construction of test equipment that allows measurements of basic parameters of stepper motors. The first part is devoted to the search about the principle of operation of the hybrid stepper motor. For the analysis engine has been used a mathematical simulation model with real parameters in Matlab/Simulink. The next section is the design of mechanical and electronic form of the test facility with a description of the components used. The last part of this work is focused on measuring the excitation currents and measuring loss of steps at various control modes and microstepping.
|
|
|
Current sensing with Hall-effect sensors
Štindl, Daniel ; Kovář, Jan (referee) ; Šotner, Roman (advisor)
This master's thesis deals with integrated Hall-effect current sensors. The thesis contains summary of manufacturers of current sensors suitable for low current measurement and comparison of their important parameters. Next objective of the thesis is a design of test board used for evaluation of temperature depedent accuracy of several sensors simultaneously. The device can be connected with PC through USB interface for saving measured values or automated control with other instruments.
|
guest ::
