|
|
Production hall
Londa, Jan ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
This thesis deals with steel structures of industrial building with the arrangements of the building with a span of 18 m, a length of 18 m and a corresponding height of cantilever of a crane track girder is 6,6 m. In the hall are considered two cranes with a capacity of 20/5 t and 32/8 t. The structures is designed for the district of Olomouc.
|
|
|
Static solution of wood hall structures
Koch, Filip ; Zídek,, Rostislav (referee) ; Brdečko, Luděk (advisor)
The subject of the thesis is the design and assessment of the roof storage shed. The work addresses four different types of roof structures for hall´s ground plan in size of 12 x 24 m. For each structure is defined geometry, loads, internal forces and drawing up of the opinion of selected elements. The thesis also concerns some important structural details and their solutions. Location of the hall: Brno.
|
|
|
Design of lattice structures for additive manufacturing using Selective Laser Melting technology
Vrána, Radek ; Maňas, Pavel (referee) ; Koutný, Daniel (advisor)
Metal additive technology allows to create objects with complex shape that are very difficult to produce by conventional technologies. An example of such component is a porous structure which is composed of periodical truss cells. This diploma thesis deals with the prediction of the mechanical properties of very small lattice structures made of additive manufacturing technology Selective Laser Melting. Using the proposed test specimens it was found that real dimensions of the trusses varies with size and orientation to the base platform. It was proposed and tested samples for rod tensile test made of SLM. Based on the real information about dimensions and mechanical properties of rods were predicted mechanical properties of lattice structures. A lot of mechanical tests were carried out to obtain the real mechanical properties. Test results and conclusions are described in the thesis.
|
|
|
Static and dynamic assessment of an outlook tower construction
Valíček, Jan ; Kala, Jiří (referee) ; Salajka, Vlastislav (advisor)
This thesis deals with static and dynamic analysis of an lookout tower construction. For dynamic analysis a computational model in ANSYS software is created. Static analysis is performed by Scia Engineer software. Both of this software use finite element method. It is also focused on wind load determination by Eurocode 1, structural factor calculation, modal analysis and vortex shedding. Verification of selected parts according to Eurocodes is included.
|
|
|
Connecting Footbridge
Sláma, Jakub ; Štrba, Michal (referee) ; Brosch, Petr (advisor)
The subject of this master’s thesis was desingn and assessments the connection of two buildings by footbridge corridor. The structure was designed as a lattice structure without verticals. Construction is stored on two pillars lattice design. Cladding footbridge was cosidered by glazing. Construction is freestanding and doesn’t load bordering adjacent buildings.
|
|
|
HST Station at the Airport Brno Tuřany
Svobodová, Lenka ; Kyselka,, Mojmír (referee) ; Nový, Alois (advisor)
Main topic of this Masters Thesis is design of railway station for high speed line railway. Building site is situated in East Moravian region in the district of Brno-Tuřany. The building is designed as a detached two-storey object standing on the bridge over the railway. Mass of the building consists of two trimmed blocks which are mutually mirrored. The mass of both parts of the building is pervaded by illuminating stripe. Its shape is also based on the shape of trimmed block and rises over the surrounding surfaces. There are placed vertical paths in the stripes. It helps passengers in orientation because these are visible even from the outside of the building. This arrangement of individual masses symbolizes both direction of the arrival of trains to the station. There is placed arrival and departure hall in the middle of the object. Its height is similar to the height of the object itself. The hall is surrounded by the service facilities of the railway station situated on two floors. The supporting structure is made of steel. Both peripheral housing and roof are supported by the frame construction consisting of planar lattice beams. Construction of the façade is composed of frame system Wicona. The peripheral housing is tiled with panels of expanded metal.
|
|
|
Belt conveyor
Konečný, Tomáš ; Pokorný, Přemysl (referee) ; Řezníček, Milan (advisor)
The aim of this bachelor's thesis is to propose design solutions conveyor belt to transport sand and gravel to concrete batch mixer. The maximum transport capacity 2000 kg/cycle, the cycle time benefits, including stirring for 4 min and 4.5 m height difference work contains a description of the main functional parts of the conveyor belt, functional calculations according to standard ISO 5048, determination of main dimensions, the design of the drive and tensioning devices. Strength calculation is performed for tightening screws, nuts and truss structures.
|
|
|
Steel structure of an industrial building
Jílek, Josef ; Puchner, Josef (referee) ; Sýkora, Karel (advisor)
This thesis deals with structure of the single-aisle steel industrial hall in accordance with the arrangements of the building with a span of 30 m, a height of 84 m and corresponding height of the cantilever of a crane track girder is 9,0 m. In the hall are considered two cranes with a capacity of 50/12,5 t and 32/8 t. The main bearing element is formed by lattic truss stored on solid pillar down anchored in transverse direction. Distance of transversal pillars is 12 m and between them designed hanging purlins. The structure is designed for the district of Brno.
|
|
|
The steel roof structure of a hall
Havíř, František ; Pilgr, Milan (referee) ; Štrba, Michal (advisor)
The aim of this bachelor’s thesis is to design the steel roof structure of a sport hall in the area of city Olomouc. The plan dimensions of the hall are 55,0 x 35,0 m and height is 15,0 m. The solution is chosen from two preliminary variants. The roof construction is on the cross-section formed by the unbalanced circular arc. The main load bearing structure is created by planar circular lattice frames with height 1,8 m, which are hinged on the columns at one side, and on the other side tailed to the underlying structure. Between main bearing arches are solid purlins, which are radially arranged. Spatial solidity is provided by transverse and longitudinal bracings.
|
|
|
The steel roof structure of a sport hall
Frank, Ivo ; Barnat,, Jan (referee) ; Štrba, Michal (advisor)
The subject of this bachelor’s thesis is to design the steel roof structure of a sport hall in the area of city Jihlava. The plan dimensions of the structure are rectangural 45.200 x 40.300 m. The height of the structure is 15.150 m. The hall is designed by cylindrical roof. The main load bearing structure is created by arch lattice frame. The width of the frame is 40.300 m. The spacing of frames is 9.000 m. Frames are connected by lattice purlins‘. Purlins’are arranged radially. Longitudal rigidity of the structure is provided by transverse wind braces and upper beams of the purlins‘. Roof covering is made of roof panels laid directly on the purlins‘. The cladding is made of panels too. In the front of the structure is the cladding made by self-supported structure, which is not part of this thesis.
|
guest ::
