|
|
Design of sheet bender
Kazda, Tomáš ; Tůma, Jiří (referee) ; Pavlík, Jan (advisor)
This bachelor’s thesis deals with the design of a sheet metal bending machine, which is intended for home workshops, or common craft operations. The first part of the thesis contains a overview of similar machines, that are currently available in the shops. In the second part of the thesis was selected the most optimal design, which arose from the three conceptual designs. Each design was rated and on the basis of a multi-criteria analysis were selected the best one. Final design were processed to the 3D model, which have a technical calculations and technical drawings too. After this were made a economic calculations of a final design, including a comparison with a selected models from the research part of this thesis.
|
|
|
Energy machines for forming technologies
Koukal, Vojtěch ; Varjan, Matúš (referee) ; Podaný, Kamil (advisor)
The bachelor thesis provides characterization of energy machines, basic division and a brief overview of the various types of energy machines used in metal forming. Used machines are characterized in this thesis. Basic description and principle with examples of practical usage are stated for each type of energy machines.
|
|
|
Power machines for forming technologies
Sejkora, Petr ; Varjan, Matúš (referee) ; Podaný, Kamil (advisor)
The bachelor thesis provides characterization of power machines, basic division and a brief overview of the various types of force machines used in metal forming. Used machines are characterized in this thesis. Basic description and principle with examples of practical usage are stated for each type of power machines.
|
|
|
Hydroforming machine for non-ferrous material tubes
Ocelík, Jakub ; Holub, Michal (referee) ; Knoflíček, Radek (advisor)
Master`s thesis deals with unusual high-pressure-fluid forming technology – hydroforming. There are discussed factors, which are affecting forming process, and there are made conclusion of it for machine design process. There is also made an evaluation of tube hydroforming technology in nowadays. The objective of thesis is to design new forming machine for tube hydroforming and for use in bicycle frames design. The machine is to be determined for manufacturing series up to 1000 pieces. Based on calculations and discussion of hydroforming technology, the best design solution is chosen. Machine is designed as modular conception with pressure multiplication of forming fluid right in die cavity. There is no need to use high pressure pump for forming fluid, used in common machines for tube hydroforming. This leads to cost reduction and so the objective of thesis is accomplished.
|
|
|
Forming Machine Control System
Vaško, Jiří ; Fojtík, Pavel (referee) ; Kučera, Pavel (advisor)
This master thesis deals with the implementation of the control system for the forming machine used in producing of confectionery forms. The introductory part describes the forming machine from the point of important control elements. The second part is associated with the hardware design of the control automat and description of main functional units on the control PCB, as well as on other PCBs. The following text presents the communication protocol between the control automat and PC and after that there is a description of the CPU firmware. The final section brings the characteristics of the PC application for a connection with the automat.
|
|
|
Company´s Business Development Plan on the Markets of Automation and Technical Diagnostic
Červeň, Jakub ; Chlebovský, Vít (referee) ; Šimberová, Iveta (advisor)
This master thesis deals with the business development activities of the company 4dot Mechatronic Systems, s.r.o. which operates on the market of industrial automation and technical diagnostic. The internal and external environment is analyzed based on the knowledge from the theoretical section of the thesis to determine the current company's situation and analyze the environment which directly influences the company. Lastly, suggestions and recommendations for the business development of the company are proposed.
|
|
|
The process of decompression in hydraulic systems of forming machines
Havelka, Milan ; Habán, Vladimír (referee) ; Pochylý, František (advisor)
This thesis consists of two main parts. The first part is a theoretical analysis, or a literary research, it is focused on the physical properties of the fluid, which have direct impact on the decompression. The aim of the second part is to evaluate the measurement of the forging valve and subsequently simulate the issue by means of CFD. The first simulations were performed for the maximal valve stroke and used for the CFD solver setup calibration. The subsequent analyses dealt with possible openings of the valve. In the final chapter the theoretical impact of the liquid compressibility and of the undissolved air is discussed. The results of the thesis can prove useful for the new valve setting in hydraulic circuit or for possible geometry modification.
|
|
|
Manufacturing of a Wheel Nut With Outer Hexagon
Dvořák, Ondřej ; Forejt, Milan (referee) ; Řiháček, Jan (advisor)
The thesis deals with the design of a production technology for a wheel nut with an external hexagon, a tapered seating surface, and a shank. The production series is set at 200,000 pieces per year. The raw material is a coil of wire with a circular cross-section and a diameter of 20 mm made of steel 11 320. After evaluating the specified requirements and conducting a literature review, the production technology of cold forming is selected, specifically the combination of extrusion and upsetting. Three basic production processes are designed, which are subsequently optimized, and their manufacturability is verified using the simulation program Simufact Forming 1.6. For the most suitable production variant, the flow stress, deformation resistance, and forming forces are calculated for each operation. By comparing with the simulation results, the total force required to produce the given nut is determined, which is crucial for selecting a suitable machine. The forming machine used is a CBF 204L with a nominal force of 3,500 kN, for which a three-operation tool is designed. During the tool design, the internal radial pressure acting on the die is also verified. The results indicate that it is necessary to use encapsulation using a single clamp for the second operation. The tool is constructed to be compatible with the parts of the chosen machine according to the provided layout and available machine parameters.
|
|
|
Company´s Business Development Plan on the Markets of Automation and Technical Diagnostic
Červeň, Jakub ; Chlebovský, Vít (referee) ; Šimberová, Iveta (advisor)
This master thesis deals with the business development activities of the company 4dot Mechatronic Systems, s.r.o. which operates on the market of industrial automation and technical diagnostic. The internal and external environment is analyzed based on the knowledge from the theoretical section of the thesis to determine the current company's situation and analyze the environment which directly influences the company. Lastly, suggestions and recommendations for the business development of the company are proposed.
|
|
|
Design of sheet bender
Kazda, Tomáš ; Tůma, Jiří (referee) ; Pavlík, Jan (advisor)
This bachelor’s thesis deals with the design of a sheet metal bending machine, which is intended for home workshops, or common craft operations. The first part of the thesis contains a overview of similar machines, that are currently available in the shops. In the second part of the thesis was selected the most optimal design, which arose from the three conceptual designs. Each design was rated and on the basis of a multi-criteria analysis were selected the best one. Final design were processed to the 3D model, which have a technical calculations and technical drawings too. After this were made a economic calculations of a final design, including a comparison with a selected models from the research part of this thesis.
|
guest ::
