|
| |
|
|
Isolation of pure aminoacids from wheat bran
Sloupová, Klára ; Diviš, Pavel (referee) ; Pořízka, Jaromír (advisor)
Wheat bran is a promising material containing a wide range of useful components, including proteins. In addition, it is produced in significant volumes. Currently, wheat bran is used for the production of energy by combustion and for feed purposes. Gradually, new methods of valorization of this material are being sought. One of the possibilities of using wheat bran is the isolation of proteins, hydrolysis, and separation of selected amino acids. This diploma thesis deals with this issue, it is focused on the recovery of arginine and leucine from a protein isolate. Proteins were extracted from wheat bran by changing the pH. Thanks to the subsequent lyophilization a protein isolate was gained. Prior to hydrolysis of the resulting isolate, a stability test of arginine and leucine amino acid standards was first performed, to which various hydrolysis methods were applied. Acid hydrolysis using a mineralizer, which was applied to the protein isolate, was proved to be the most effective. This was followed by the derivatization of the hydrolysates with OPA and analysis of the resulting hydrolysates by high-performance liquid chromatography with UV-VIS detection. Then, suitable adsorption and desorption conditions were optimized. It was found that the time dependence does not affect the amount of adsorbed material on the sorbent. Therefore, an application time of 15 minutes was chosen. While optimizing the amount of used standard, it was found that the optimal weight was 0.25 g of sorbent. The selected conditions were applied to the protein hydrolyzate. Two fractions were obtained by the separation of selected amino acids due to the change in the pH of the citrate buffer. After the application of this procedure, 0.26 g of arginine and 0.82 g of leucine were obtained from one kilogram after evaporation. From evaporation two, 1.01 g of arginine and 0.25 g of leucine were obtained after evaporation.
|
|
|
Rhodium in the environment
Ondreášová, Klára ; Nevrlá, Jana (referee) ; Komendová, Renata (advisor)
This bachelor thesis focuses on the characteristic of rhodium, its use in the automotive industry, the occurrence in environmental compartments (air, soil, vegetation, water), accumulation and transformations. In this thesis there are also described methods of sampling for determination, the types of sample preparation, separation and preconcentration techniques necessary prior to instrumental analysis. The work also focuses on the most commonly used analytical methods of rhodium determination, which are spectrophotometric methods, AAS, ICP-AES and ICP-MS.
|
|
|
Study and characterization of organic substances in a biochar sample
Vojáčková, Beáta ; Kalina, Michal (referee) ; Enev, Vojtěch (advisor)
This bachelor thesis characterizes biochar from a physico-chemical point of view. The theoretical part deals with biochar as a soil conditioner, its properties, use, production, and last but not least, effect of its sorroundings. For better characterization of organic and inorganic matter a phosphate buffer was used. This buffer ensures their specific extraction due to a neutral pH. The second path is to use rainwater, which simulates the condition of the soil environment. In the experimental part are discussed both; purified buffer-extracted samples and rainwater samples, which were studied by thermogravimetric analysis (TGA), elemental analysis (EA) and by infrared spectroscopy with Fouier transform (FTIR-ATR). Conductivity and pH were also measured. Moisture and ash content, which represent the inorganic non-combustible fraction, were determined using thermogravimetry. The extraction yields were converted to ashless wt. % based on these values. Results of EA provided us with information on the content of biogenic elements and basic physico-chemical characteristics of biochar. In contrast, the FTIR method defined the presence of individual functional groups and specific constitutive units, which are present in the extracts. This information allows us to better understand the environmental impact of biochar on the soil ecosystem.
|
|
|
Isolation, characterization and application of biomedically important polymer P(3HB-co-4HB)
Krupičková, Kristýna ; Přikryl, Radek (referee) ; Obruča, Stanislav (advisor)
This diploma thesis deals with the isolation and characterization of copolymer P(3HB-co-4HB). The teoretical part was prepared as a literature search which describe polyhydroxyalkanoates in general, their structure, synthesis, degradation and isolation. Furthermore, copolymers containing 4HB units are mentioned in this thesis and there is also no mentioned of the biosynthesis and biodegradation of copolymer P(3HB-co-4HB). The first aim of this diploma thesis was to find out which solvent is the best for copolymer extraction and then characterize obtained copolymer P(3HB-co-4HB). The isolated copolymer was characterized by gas chromatography, SEC-MALS, thermal analysis and SEM. In the second part of the thesis, release of model biologically active substance from the PHA films was studied. Rhodamine 6G dye was selected for the simulation, which was used to stain the copolymer films and the P(3HB) films. It was observed that film prepared from P(3HB-co-4HB) copolymer released entrapped substance much faster than film made from P3HB homopolymer, and, in addition, the copolymer was substantially more susceptible to enzyme degradation.
|
|
|
Obtaining and complex charaterization of Aronia spp. extracts
Seidlová, Kateřina ; Zemanová, Jana (referee) ; Veselá, Mária (advisor)
Aronia (Aronia melanocarpa) is a berry fruit with distinctive sensory characteristics and health-promoting properties. Polyphenols are the main bioactive compounds found in aronia including natural pigments – anthocyanins. Bioactive compounds are usually obtained from natural materials by extraction, in this work, two methods of extraction were compared – maceration and PHWE. Based on the total phenolic content, maceration was chosen as a more suitable method and then was optimized with statistical model – Design of Experiment. Optimal conditions were set to temperature of 30 °C, extraction agent 50 % ethanol, solid-solvent ratio 10 g per 50 ml and time of extraction for 30 minutes. Extract obtained under these conditions was characterised by total phenolic content – 1441 ± 90 mg/100 g DW, total anthocyanin content 943 ± 8 mg/100 g DW and antioxidation activity by ABTS 24,78 ± 0,09 molTE/g. In total of 25 volatile compounds were indentified in the optimal extract with content > 0,5 %. Major part created aldehydes and esters, with the main compounds being benzaldehyde (32,25 %) and methyl hexanoate (21,37 %).
|
|
|
Extraction of bioactive substances from black currant pomace
Sedláčková, Lucie ; Štursa, Václav (referee) ; Vespalcová, Milena (advisor)
This bachelor thesis deals with extraction of bioactive substances from black currant pomace (Ribes nigrum). The theoretical part contains the botanical characteristics of the plant species Ribes nigrum. It is also devoted to the biologically active substances contained in black currant and possibilities of using black currant in the food industry. The fourth chapter deals with description of phenolic compounds, their distribution and methods of determination of phenolic substances. The fifth chapter describes selected extraction procedures. In the experimental part, there were extracted dry black currant pomace in order to optimize the extraction process and obtain the highest yields of dyes. In addition, were determined the selected chemical and physical characteristics of blackcurrant juice and extracts from blackcurrant pomace. A better solvent was a mixture of water and ethanol in a volume ratio of 1:1. After 14 hours maceration of dry pomace, were obtained 769,9 mg anthocyanins per 100 g of dry material.
|
|
|
Utilization of flow-coulometry in study of transport metal ions in humic gels
Kalina, Michal ; Pabst, Willi (referee) ; Klučáková, Martina (advisor)
This diploma thesis deals with the study of non-stationary diffusion of cupric ions in humic gels. The main objective of the work was the optimalization of conditions for using the electrochemical analyzer EcaFlow 150 GLP for the study of diffusion experiments. Next part was focused on reaching of constant concentration profiles of cupric ions in humic gel. Last aim of the study was the bond strength between cupric ions and humic acids. Diffusion was characterized by the values of the diffusion flux and cupric ions concentration profiles in humic gel. The data necessary for calculation were obtained by the electrochemical analyses of the extracts of each slice after diffusion on the EcaFlow 150 GLP. It has been proved that after application of several adjustment is this method suitable for the study of diffusion experiments. By using of different extraction agents was obtained the fractionalization of cupric ions according to the bond strength to humic acids.
|
|
|
The issue of determination of tin in environmental matrices
Bušinová, Markéta ; Sommer, Lumír (referee) ; Doležalová Weissmannová, Helena (advisor)
This diploma thesis deals with the retrieval of the content of tin in environmental media, the circulation in them and possibilities of the determination of tin in the environment. Summarizes available information on the properties of tin and its compounds, the occurrence and circulation of tin in environmental and determination of tin in environmental media, attention is paid to the determination of total tin content using method of ET-AAS. The experimental part is focused on optimization methods of determination for the ET AAS and selection of a suitable extraction procedure for determination of total tin content in soils and sediments. The best procedure for the determination of tin in the ET-AAS was applied to samples of soil, sediment and water. As the optimum matrix modifier was chosen the solution of Pd (NO3)2 in 5% ascorbic acid, the optimum pyrolysis temperature was 1400 °C and atomization temperature 2400 ° C. Neither of extraction procedures examined were found to be an appropriate procedure for the determination of tin in environmental samples and further work is necessary to optimize the method of separation.
|
|
|
Detection, Extraction and Measurement of the Length of the Metacarpal Bones in X-Rays of the Human Hand
Chalupnik, Alexandr ; Rydlo, Štěpán (referee) ; Drahanský, Martin (advisor)
The aim of the bachelor thesis is the design and implementation of an algorithm for the detection, extraction and measurement of the length of the metacarpal bones in x-rays of the human hand. The first part is focused on the principles of x-rays and the anatomy of the human hand. The second part contains the design and implementation of the task. The algorithm is based on image processing methods, such as thresholding or edge detection. In the end, the measurement results are evaluated on a set of images, which were provided by the Department of Anthropology at Masaryk University.
|
guest ::
