|
|
Complex diagnostics of the family house
Tomanová, Jana ; Balkanský, Ondřej (referee) ; Schmid, Pavel (advisor)
This master´s thesis deals with the issue of the building from a clay. It is focused on defects and rehabilitations of these constructions. The introductory parts concerns with probable defects especially of clay buildings, furthermore with causes of the creation of defects, its depictions and the relevance. In the following part the methods of rehabilitation not only of clay buildings are presented. In this part the rehabilitative methods of foundation, vertical and wood constructions, which create mainly the structural support of the buildings, are described. In the second part, the structural and technical research of the current structure with farm part – barn is executed. The part of research is creation of the drawing documentation, description of disposition and structural and constructional solution of building, structural calculation of a part of construction, assessment of actual state of structure and prospective plan of proceeding and rehabilitation.
|
|
| |
|
|
Diagnosis of Pneumatic Cylinders Using Acoustic Emission Methods
Mahmoud, Houssam ; Baran,, Ireneusz (referee) ; Santos, Serge Dos (referee) ; Mazal, Pavel (advisor)
Tato práce se zabývá vývojem nového efektivního diagnostického postupu pro kontrolu funkce pneumatických válců pomocí metody akustické emise. Cílem práce bylo navrhnout a určit diagnostická kritéria pro hodnocení kvality vybraných typů pneumatických válců. Prvním krokem bylo nalezení typického akustického emisního signálu, který je spojen s určitým typem poškození ve válci využitím frekvenčního spektra signálu. Později byl tento parametr nahrazen parametrem RMS během sledování změn v průběhu testů. Na konkrétních válcích byl sledován vztah mezi akustickou emisí a různými typy defektů a byl představen nový přístup k určování těchto typů vad a jejich odlišením v signálu akustické emise. Druhý krok studie že neporušené a poškozené válce byly porovnávány tak, aby se zjistily výrazné rozdíly, které určují, zda je válec poškozen nebo nepoškozen. Několik nepoškozených válců bylo testováno akustickou emisí a následně v nich byly vytvořeny umělé vady. Signály z vysouvání a zasouvání pístu byly zaznamenány a analyzovány pomocí řady parametrů. Na základě časového zpoždění a normalizace RMS byly rozpoznány odezvy mezi poškozenými a nepoškozenými pneumatickými válci. Rozdíly byly zjištěny porovnáním maximální hodnoty RMS ze snímače upevněného na předním víku válce a snímače upevněného na zadním víku válce pro jeden cyklus. Poškozené a nepoškozené válce byly rozlišeny pomocí rozdílů energetických hodnot přítomných v signálech z obou snímačů v závislosti na zdvihu pístu. Konečné vyhodnocení válce bylo určeno výpočtem celkové hodnoty RMS. Ve třetím kroku experimentu byly válce postupně zatěžovány různými závažími ve svislém směru. Signály akustické emise byly zaznamenány z vysouvání a zasouvání pístu a poté analyzovány. Časové zpoždění se vypočítává z digitálního vstupu a začátku pohybu pístu. Energie signálu a RMS akustické emise porovnávají různé reakce v poškozených a nepoškozených pneumatických válcích s a bez zatížení. Výsledky testu ukázaly lineární vztah mezi křivkou RMS a zatížením. Defekty ovlivňují vztah mezi aplikovaným zatížením a zaznamenaným signálem snímačů.
|
|
|
Diagnostics of Reinforced Concrete Bridge
Rozbroj, Lukáš ; Anton, Ondřej (referee) ; Cikrle, Petr (advisor)
This thesis contains diagnostics of a reinforced concrete girder bridge in the municipality of Újezd u Brna. The aim is to conduct an inspection of the bridge, gather quality photo-documentation of defects and failures and design and conduct a diagnostic examination of such extent that would be necessary for judging the load bearing capacity of the bridge. The result of this thesis is the determined load bearing capacity and a proposal of measures required to keep the bridge functional.
|
|
|
Automatic Testing of Software
Mrázik, Matej ; Tisovčík, Peter (referee) ; Korček, Pavol (advisor)
The main goal of the bachelor thesis is to automate the testing of IQRF Gateway Daemon software. The practical output is a tool capable of testing the IQRF Gateway Daemon through an emulated virtual network of intelligent devices. In the theoretical part, the work outlines the issues of software testing to the reader. These principles are then applied in testing the IQRF GW Daemon. The reader will get acquainted with the resulting tool and its functionality, which will be able to further expand if necessary.
|
|
|
RESEARCH AND DEVELOPMENT COMPOSITE MATERIAL WITH A HIGHER RESISTANCE TO HIGH TEMPERATURES
Válek, Jaroslav ; Durica,, Tibor (referee) ; Kolář,, Karel (referee) ; Sitek,, Libor (referee) ; Bodnárová, Lenka (advisor)
Concrete has many advantageous properties as regards resistance to fire. It is non-flammable and it has a low thermal conductivity. However, concrete structures, which are not designed for resistance against fire, show significant damage after heating. In particular, the explosive flaking with the consequence of weakening the reinforced concrete cross-section and exposing the steel reinforcement to the temperatures higher than critical temperature of reinforcement. There are only a few possible measures of preventing or mitigating the effects temperature load used. Ways of protection can be divided into two systems: active and passive. Active systems are designed to ensure the greatest possible reduction of temperatures the concrete is exposed to. Passive systems directly resist to high temperatures and fire. Design of composition of concrete with the aim of higher resistance to exposition to high temperatures belongs among the passive systems. A part of the work focuses on summary searches of the problems of concrete and reinforced concrete structures exposed to high temperatures and fire. The goal of the work is defining requirements for cement matrix based composite material and its design ensuring the highest possible resistance to high temperatures or direct fire.
|
|
|
Specifics of assessment of old concrete structures
Mička, Michal ; Žítt, Petr (referee) ; Cikrle, Petr (advisor)
The bachelor thesis deals with evaluation of properties materials concrete structures of former textile factory Vlněna from the 19th century in Brno. The content of this work is divided into the theoretical and practical part. The theoretical part deals with the description of the methods used in the research of reinforced concrete structures, comparison of the types of beams used in the past with used today and unlike the principles of the design of reinforced concrete structures in the 1920s and 30s of the 20th century compared to the present time. There are also described components, properties and technologies of concrete production in the period between the war and the comparison with the present time. The practical part consists of on-site examinations and sampling. A large part consists of the evaluation of laboratory tests on the test samples taken from the solved part. A total of 24 test samples were performed. It also compares the strength of the concrete reinforcement with the reinforcement used today.
|
|
|
Preparation of calibration gauges for eddy current testing method
Machovič, Daniel ; Hudcovič, Peter (referee) ; Radil, Lukáš (advisor)
The aim of the diploma thesis is to clarify the topic of calibration samples used in eddy current testing on equipment in nuclear energy. The theoretical part of the diploma thesis is focused on the eddy current testing method, which belongs to the technology of non-destructive defectoscopy. This part of the work describes the principle of the method, its scope, limitations and dividing of sensors used in this test method. The work briefly describes the physical principle of the laser, its types and operating modes. The practical part of the work is focused on the production of a calibration samples by laser. Another point of the work is the comparison of data obtained from eddy current measurements on samples made by laser and on calibration samples used in practice.
|
|
|
Diagnostics and assessment of the structure of bridge
Lehocký, Peter ; Komárková, Tereza (referee) ; Kocáb, Dalibor (advisor)
This diploma thesis focuses on diagnostics of bridge structures. First part of this diploma thesis will focus on theoretical knowledge about bridge structures and common diagnostic techniques suited for examining material priperties of samples taken from structure. Second part of this thesis will focus on practical use of experiments used in diagnostic branch. I will be doing visual observation of concrete structure followed by experiments on core samples. End of thesis will be evaluating structure from global perspective and will deliver specific sugestions for renovation.
|
|
|
Welding of the framework from aluminium alloys
Rašek, Ondřej ; Daněk, Ladislav (referee) ; Kubíček, Jaroslav (advisor)
For TIG welding of transformer fame is important enough weld root fusion, however exposed surfaces must remain unaffected. Three types of test were made to determine properties of welds under different conditions. Tests were macroscopic inspection, tensile test and fracture test. Next was economic evaluation of different methods. Best results were for single layer weld with pre-heated material.
|
guest ::
