|
|
Car showroom ventilation with workshop
Kordula, Lukáš ; Rubinová, Olga (referee) ; Uher, Pavel (advisor)
The bachelor thesis titled "Air Conditioning for an Auto Salon with Workshop" focuses on designing an air conditioning system for an auto salon with a workshop for cars located in Brno. For the facility, we have designed two air conditioning units, with one serving the auto salon and the other serving the car workshop. The unit for the auto salon aims to cool during the summer months and heat during the winter, while for the workshop, the goal was to extract harmful emissions from the workshop environment. The thesis employs methods for designing air conditioning systems, including selecting suitable equipment. The outcome of the thesis comprises two proposals for air conditioning units tailored to the needs and conditions of the auto salon and workshop environment, with an emphasis on energy efficiency and sustainability. The theoretical part focuses on acoustics in HVAC systems. The computational part addresses the individual steps necessary for designing the air conditioning unit. Software tools used in the design include Teruna and AeroCad. The project part develops the necessary project documentation within the specified scope.
|
|
|
Autocentrum Volkswagen Group
Rosič, Jan ; Klement, Miloš (referee) ; Boleslavská, Yvona (advisor)
The subject of the bachelor's thesis is the development of documentation for a building permit and part of the documentation for the construction of the Volkswagen Group car center building. The proposal is directly based on the assignment of the subject BGA021 – Studio of production buildings, and follows on from the studio project processed in the winter semester of the second year. The new building is located in the Brno-Komárov district, at the intersection of Hněvkovského and Sokolova streets, and its location makes use of a lucrative position. The car center building combines a service and showroom with an administrative part. With its internal arrangement, it effectively separates these two different operations so that they do not interfere with each other and at the same time they can cooperate. Exterior, on the other hand, tries to connect these operations into a seamless whole. This is to be achieved by the repetitive verticality freely transitioning from the shading system of the showroom to the copilite glazing of the service. The internal layout of both parts of the building is designed taking into account the rapid development of the automotive industry and is maximally flexible. The showroom is intended as a monumental elevated space with an exposed roof structure and a minimum of fixed elements. The service is similarly designed as an open workshop area, only unclean or noisy operations and storage areas are separated.
|
|
|
Mazda showroom and service
Došek, Samuel ; Kalánek, Ing Jiří (referee) ; Brzoň, Roman (advisor)
This diploma thesis describes the design of showroom and car service of Mazda brand in Trencin. It is a detached building on a flat terrain. The car showroom and car service have two above-ground floors and one underground floor. On the first underground floor there is an underground garage designed for new cars for sale. On the first floor there is a car showroom with a customer base and a car service with facilities for car service staff. On the second floor there are offices with facilities for staff. The building is designed from a reinforced concrete structure and porous concrete blocks. The ceilings are monolithic reinforced concrete and the roof is designed as flat with trusses and reinforced concrete slab. The work includes project documentation for the construction.
|
|
|
Autosalon in Jihlava
Mátlová, Michaela ; Balázs, Ivan (referee) ; Pešek, Ondřej (advisor)
The aim of my thesis was to propose two variants of the steel construction of the car showroom. The ground dimensions of the structure are 35 x 50 meters. The building reaches a height of 8.8 m above the surrounding terrain. The building consists of two parts. The exhibition part of the car showroom will be partially glazed and also includes office space. The second part is the adjacent car workshop. The variants differ in the construction of the enclosure of the exhibition part of the car showroom. The work includes two static designs of the supporting steel structure of the car showroom. The winning variant of the frame construction a solution of selected details and drawing documentation.
|
|
|
Car Showroom
Smrčka, Václav ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
The aim of the thesis is to design and appreciation steel load-bearing structure of motor show. The object is situated in Brno. The Structure consist of tubes and rolling sections. The breadth of construction is 36,5m, lenght 42m and height in the heihest point is 13,2m. The structrure is consists of three parts. Show room, offices and workshop. The height of show room is 20m, offices 8,5m and workshop 8m. The show room consist of arched truss girder. The distance of each cross links is 6 m. Structural design were perfomered by Scia Engineer 2017 and hand computation.
|
|
|
The Steel Structure of Car Showroom
Buchta, Vojtěch ; Buchta, Stanislav (referee) ; Hron, Lukáš (advisor)
The task of the thesis was to design a draft and a review of car’s showroom supporting structure. The object is located in the city of Hradec Králové. Floor plan has a size of 30 x 15 m, the height of the object is 7 m at the highest point. The mono-pitched roof is formed by two parts on the same slope 3.81 °. Material of all components is steel S235. All calculations were performed in accordance with valid standards. The structure consists of a load-bearing columns fixed to the ground, the truss girders are designed of hollow cross-sections, pin-suported by the columns. The purlins are pin supported by upper chords of a truss girder, with the lower and upper edges flushing. Purlins support the roof made of roof-panels by Kingspan, thickness 160 mm. Wall casing the technical parts of the object is formed also by system panels by Kingspan. The cladding of the sales area is made of glass panels by Reynaers.
|
|
| |
|
|
The load bearing steel building structure of the car showroom
Hubáček, Ondřej ; Karmazínová, Marcela (referee) ; Melcher, Jindřich (advisor)
This work contains a proposal supporting steel structure of the single- industrial buildings intended for parking motor show / exhibition cars in Brno. Building plan dimensions are 20 x 36 m. The main structure is defined by a planar cross-linked. Transverse bond is formed trusses, connected by purlins. Trusses are on both sides of the structure hinged to the fixed columns. The main beam is made up of trusses with an installation height of 1,5 m at midspan. Distance crosslinks is 6 m. Spatial rigidity is ensured by a system of longitudinal transverse stiffeners. Steel truss rods are made of rolled profiles are pillars of HEB profiles and purlins are designed from rolled profiles I. The design is carried out according to standards EN. Used material bearing elements is steel S 235 (regular steel).
|
|
|
The Steel Structure of the Car Schowroom
Pelechová, Denisa ; Šmak, Milan (referee) ; Buchta, Stanislav (advisor)
The master’s thesis treat of design and appreciation load-bearing steel structure of Motor Show. The object is situated on the lokality Brno. Structure is composed of rolling sections and tubes. Overall height of the structure is 17,395 meters and overall lenght is 32,60 meters. Cross link iscomposed of arched girders panel that are supported on fixed pillars. Theoutside links are composed of panel columns. Load is composed of self weight, additonal imposed load, payload and climate load caused by wind and snow that is reached for given locality.Static rewiew comes out from previous load and it has been accomplished by Scia Engineer 2008 and hand computation.
|
|
|
Auto show
Václavík, Marek ; Moravcová, Eva (referee) ; Matějka, Libor (advisor)
This thesis covers brand new detached showroom with one basement and two floors. The building is divided into 2 parts, the major part of the first floor sample room (showroom) for a maximum of 13 vehicles, offices and staff facilities salon. On the second floor is located the finance department and exemplary service area. In the basement of this building are public parking garage for 16 vehicles and car accessories stores. The second part of the new building is just overhead. It consists of a private car service for 5 vehicles, stock tires, utility room, car wash and storage of spare parts for cars. Flat roof supporting structure is made of pre-stressed girders reinforced with cross reinforced concrete slab with insulation. Cladding are ventilated insulated facade, supporting part is reinforced. The showroom form the majority of the building envelope glass facade. Finish of floors in office and showroom premises are ceramic tiles. In the Service and garages cast floor resistant to petroleum substances.
|
guest ::
