|
|
Apartment building
Kramplová, Marie ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The subject of the bachelor‘s thesis is the new construction of an apartment building, which is located east of the city center of Zlín, Příluky. The building has three floors above ground and has a partial basement. It is covered with a flat roof. Cellar boxes for individual apartments and technical facilities are designed in the underground floor. There are two apartments on each upper floor. The entrance to the building is from the west side, from where the access walkway comes. Parking for eight cars is provided inside the building. There are two parking spaces for the disabled outside the building. The structural system of the building is a wall made of Porotherm ceramic blocks. The horizontal supporting structure consists of a reinforced concrete slab. The construction is based on a basic waterproof reinforced concrete structure. The perimeter walls are contact-insulated with the ETICS system using facade polystyrene with a thickness of 200 mm.
|
|
|
A family house with a watchmaking workshop
Martinek, Jakub ; Smolková Mizerová, Lenka (referee) ; Smolka, Radim (advisor)
The goal of the bachelor's thesis is the design of the layout of the building of a family house with a workshop and the creation of project documentation for the execution of the construction. The family house is designed for a family of four and is located on a flat plot on the outskirts of a small town. The building has a partial basement - under the workshop. The family house and the workshop are separated from each other by a covered parking space. The construction is based on foundation strips, the vertical supporting structures are designed from Therm type bricks and the horizontal structures are created from monolithic reinforced concrete. Roof construction is flat vegetated roof.
|
|
|
Energy efficient family house
Netopilová, Denisa ; Brzoň, Roman (referee) ; Vlach, František (advisor)
The aim of this Bachelor’s thesis is to design a nearly-zero-energy building. The level of documentation is for the building permit. First part focuses on architectural and structural design, as well as on Building Physics and Fire Safety, the second part on building service design. The designed detached house stands on a flat site in Lipník nad Bečvou. It is a two-storey house with an attached single storey garage. Both the house and the garage have flat green roofs. The main entrance is oriented to the north. On the first floor, there is a hallway, a utility room, a bathroom, an office, and a living room connected with a kitchen and a pantry. The private part of the house is on the second floor, which consists of a master bedroom with a walk-in closet, two other bedrooms, a bathroom, a toilet and a laundry room. The foundations are made of foam glass. The vertical structures are from sand lime blocks. The horizontal load-bearing structures are made of in-situ reinforced concrete. The heating is provided by a heat pump air-water using an underfloor heating system. The heat pump in combination with two solar thermal panels supply heating of the domestic water. Mechanical ventilation with heat recovery is installed and used in the house. The documentation for MVHR is on the level of detailed design. Wastewater treatment, electric installations and rainwater system are also designed. The rainwater is collected mainly from the roofs and stored in an underground water tank. This water is then used for flushing the toilet and in summer months for watering the garden. This part about building service design also includes the Building’s Energy Performance Certificate.
|
|
|
Apartment Building
Nedomanský, Vojtěch ; Zichová, Barbora (referee) ; Lavický, Miloš (advisor)
The aim of the bachelor's thesis is to design and develop project documentation at the construction implementation level for an apartment building. The subject of the bachelor's thesis was the appropriate use of structural, thermal-technical, and material solutions. It is a basement four-story apartment building of irregular shape, which contains a total of 13 apartment units, with each apartment unit assigned a basement storage room located in the basement part of the building. The building is founded on strip foundations and a base slab. The vertical load-bearing system of the above-ground floors consists of Therm-type ceramic blocks with a certified contact insulation system. The vertical load-bearing system in the basement floor is made using lost formwork blocks filled with concrete. Therm-type acoustic blocks are used for the internal load-bearing walls. Monolithic reinforced concrete ceiling slabs were designed as the ceiling structure. The apartment building is roofed with a single-layer flat green roof with a constant slope, which is prepared for the placement of photovoltaic panels to utilize alternative energy sources.
|
|
|
Integrated rescue system - station type P1
Bambasová, Petra ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
THE THEME IS OF THE STUDY AND DOCUMENTATION THE IMPLEMENTATION OF THE CONSTRUCTION OF THE NEW BUILDING OF THE INTEGRATED RESCUE SYSTEM – STATION TYPE P1. THE FIRE STATION IS DESIGNED INTO THREE OPERATING UNITS. THE MAIN ACCESS TO THE BUILDING IS IN THE 1ST FLOOR ADMINISTRATIVE AREA IN THE SOUTH-EAST SIDE OF THE BUILDING. THIS PART OF THE BUILDING HAS 2 FLOORS. THE OBJECT CONTINUES TO THE SOUTHEAST TOWARDS THE PATH OF THE GARAGE WITH 5 SPACES. ON THE NORTHWEST EDGE OF THE OBJECT IS A TECHNICAL BACKGROUND WITH A DISHWASHER AND A DRYER. TO DEVELOP OVER THE OBJECT PERSONAL VISITS FROM TWO FIRE STATIONS. ONE REGIONAL IN CESKE BUDEJOVICE AND SECOND DISTRICT IN TÝN NAD VLTAVOU. FOR INSPECTION AND UNDERSTANDING PROPOSAL FOR A NEW FIRE STATION ALSO HELPED TOUR OF DOCUMENTATION PROJECT ALREADY MADE ON CONSTRUCTION FIRE STATION IN MARIANSKE LAZNE AND FRYMBURK.
|
|
|
The building
Kříž, Lukáš ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
The subject of the diploma thesis is to prepare project documentation for the construction of a multifunctional building with almost zero energy consumption. The multifunctional building is located in the South Moravian Region on the outskirts of Rosice. It is a five-storey detached multifunctional building in a slightly sloping terrain, with one underground floor and four above-ground floors. The underground floor serves for the most part as a collective garage and also for the technical background of the building. There is a gym and showroom on the first floor. On the second and third floors there are office spaces with the necessary facilities. The remaining fourth floors are used for living, there are designed four residential units, with storage space for each apartment. The building is designed as a combined construction system, while the perimeter vertical load-bearing structures are lined with ceramic hollow blocks. The perimeter load-bearing walls in the basement are made of lost formwork. The vertical load-bearing structures inside the building consist mainly of reinforced concrete monolithic columns. The ceiling structures and longitudinal girders are also monolithic reinforced concrete. The perimeter masonry is insulated with the ETICS contact thermal insulation system. The building is based on reinforced concrete monolithic foundation strips. The roof consists of a flat single-skin vegetation roof.
|
|
|
Apartment building
Remešová, Kristýna ; Bílková, Andrea (referee) ; Čuprová, Danuše (advisor)
This thesis describes the design of a apartment building in Holešov. The apartment building has one basement and three above. The building is designed as an object with five apartment units. On first and second floor are situated 2 flats and on third floor is only 1 flat. The construction system is designed as ceramic Porotherm system. Basement masonry is made of the permanent concrete formwork. Roofing is solved by flat green roof. The work includes project documentation for the construction. Part of the project documentation is also a basic assessment of the building in terms of building physics.
|
|
|
School of Arts in Valašské Meziříčí
Hejl, Martin ; Rozehnal, Miroslav (referee) ; Štěpánek, Ladislav (advisor)
The final thesis is focused on a new building of School of arts in Valašské Meziříčí. The object has three floors, it has a basement and two above-ground floors witch a flat roof. A loadbearing structure is made of skeleton - reinforced concrete monolithic columns and reinforced concrete monolithic floor slabs. Filling masonry is made of ceramic tiles. Object has thermal insulation by mineral wool. Detailed solution of final thesis deals with the solution of main building School of arts, where are the schoolrooms and technical facilities. In the other parts of the object are a staff facilities, multipurpose hall, café and underground garage.
|
|
|
Rehabilitation centre
Duben, Tomáš ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The main target of the thesis is design of a new building of the rehabilitation center in Havlíčkův Brod. The rehabilitation center consists of three part. The main (middle) part has two above-ground floors and a basement with flat roof and the other two parts have only ground floor with green flat roof. The main middle part contains reception, café, laundry room storage, utility room, manager‘s office and outpatients doctor‘s office. In the left part there are hydrotherapy, ergotherapy, magnetotherapy and electrotherapy. In the right part there are fitness center and physiotherapy rooms. Vertical load-bearing structures are Made of Porotherm ceramic blocks (above-ground floors) and the Hollow concrete blocks filled with C20/25 and reinforcement B500B (basement). Horizontal load-bearing structures are made of the prestressed Spiroll ceiling panels. The building site contains also outdoor car park and garden with pond. The project and visualization were carried out in the ArchiCad and Lumion programme. All structures comply with the valid standards and regulations.
|
|
|
Energy-saving detached house
Klečková, Kateřina ; Bantová, Sylva (referee) ; Čuprová, Danuše (advisor)
The subject of this Bachelor’s thesis is a new construction of energy-saving twostorey detached house without basement, built in Zlin. The shape and height setting of the object adapt to the land and the surrounding area. The house is suitable for housing a family of five members. The main entrance and the vehicle access to the building are on the 1st floor from the street level Nivy IV. The house has a cuboid shape with terrace on the east side. There is a garage for one car on the western side. The main living rooms are oriented on south. The vertical structure is made of the ceramic blocks. The ceiling above the second floors is stacked from ceramic inserts, 1st and 2nd floor are connected by reinforced concrete staircase. The house has a flat roof. The project was prepared in a computer program AutoCAD.
|
guest ::
