|
|
PROBIOTIC GENES OF SIGNIFICANT LACTIC ACID BACTERIA IN FOOD
Konečná, Jana ; Ševčovičová,, Andrea (referee) ; Doškař, Jiří (referee) ; Španová, Alena (advisor)
Isolation of deoxyribonucleic acid (DNA) is an important step in the molecular diagnostics of microorganisms. A high quality of isolated DNA is necessary for DNA amplification by the polymerase chain reaction (PCR). The conventional DNA isolation using phenol chloroform extraction and DNA precipitation in ethanol is time consuming and requires the use of toxic phenol. Magnetic separation techniques using magnetic solid particles are one of modern methods to speed up the nucleic acids isolation. The aim of this work was to use two different types of magnetic particles for solidphase DNA extraction. The amounts of DNA in separation mixtures were measured using ultraviolet spectrophotometry (UV). The first experimental conditions were tested on chicken erythrocytes DNA. Phosphate buffer (pH 7, 7.6 and 8) was used for adsorption of DNA on magnetic particles. It was shown that approximately almost one half of DNA was adsorbed to the particles. The elution conditions of DNA were also optimized. Secondly, bacterial DNA was tested. This DNA eluted from the particles was in PCR ready quality. High resolution melting (HRM) curve analysis is a simple, low-cost method for amplicon discrimination and easy connection with real-time polymerase chain reaction (PCR). In this contribution, we report rapid species identification of strains belonging to the Lactobacillus group using HRM-PCR. Three different DNA isolation methods were used in this work: phenol extraction, separation using magnetic particles and commercial kit. Ten sets of targeted gene fragments primers (LAC1 – LAC2, LAC2 – LAC4, P1V1 – P2V1, Gro F – Gro R, 3BA-338f – Primer 1, V1F – V1R, CHAU - V3F – CHAU - V3R, CHAU - V6F – CHAU - V6R, poxcDNAFw – poxPromRVC, poxcDNAFw – poxPromRVT) were tested for amplification of the 16S rRNA gene. Use of GroF/R and LAC2/4 primers pairs successfully identify strains belong to the Lactobacillus group. The variance between used extraction methods for evidence of HRM curves was found.
|
|
|
Use of Molecular Biology Techniques for Identification and Analysis of Probiotic Bacteria
Konečná, Jana ; Doškař, Jiří (referee) ; Kráčmar, Stanislav (referee) ; Obruča, Stanislav (advisor)
Isolation of deoxyribonucleic acid (DNA) is an important step in the molecular diagnostics of microorganisms. A high quality of isolated DNA is necessary for DNA amplification by the polymerase chain reaction (PCR). The conventional DNA isolation using phenol-chloroform extraction and DNA precipitation in ethanol is time-consuming and requires the use of toxic phenol. Alternative method of DNA isolation is use of commercially available kits which, however, are expensive and their efficiency is low. Magnetic separation techniques using magnetic solid particles are one of modern methods to speed up the nucleic acids isolation. The aim of this work was to use two different types of magnetic particles for solid-phase DNA extraction. Magnetic microparticles P(HEMA – co – GMA) containing –NH2 group and nanoparticles PLL, whitch contains polylysine. The amounts of DNA in separation mixtures were measured using ultraviolet spectrophotometry (UV). The first experimental conditions were tested on chicken erythrocytes DNA. Phosphate buffer (pH 7, 7.6 and 8) was used for adsorption of DNA on magnetic particles. It was shown that approximately almost one half of DNA was adsorbed on the particles. The elution conditions of DNA were also optimized. Secondly, bacterial DNA was tested. After optimalization, the developed method was used for DNA isolation from real food supplements. This DNA eluted from the particles was in PCR ready quality. High resolution melting (HRM) curve analysis is a simple, low-cost method for amplicon discrimination and easy connection with real-time polymerase chain reaction (PCR). In this thesis, we report rapid species identification of strains belonging to the Lactobacillus group using HRM-PCR. Three different DNA isolation methods were used in this work: phenol extraction, separation using magnetic particles and commercial kit. Ten sets of targeted gene fragments primers (LAC1 – LAC2, LAC2 – LAC4, P1V1 – P2V1, Gro F – Gro R, 3BA-338f – Primer 1, V1F – V1R, CHAU - V3F – CHAU - V3R, CHAU - V6F – CHAU - V6R, poxcDNAFw – poxPromRVC, poxcDNAFw – poxPromRVT) were tested for amplification of the 16S rRNA gene. Use of GroF/R and LAC2/4 primers pairs successfully identify strains belong to the Lactobacillus group. The variance between used extraction methods for evidence of HRM curves was found.
|
|
|
Drugs and possibility of their elimination in sewage waters
Křivánková, Zuzana ; Repková, Martina (referee) ; Vávrová, Milada (advisor)
This bachelor thesis deals with issue of increasing consumption of pharmaceuticals and its influence on the environment. In the Czech Republic the pharmaceuticals from the benzodiazepine group are still widely prescribed and used by patients. There was tracked four representatives of this group alprazolam, bromazepam, diazepam and oxazepam which are indicated for therapy of insomnia, psychiatric diseases but also like a general anesthetics or antiepileptics. Presence of this pharmaceuticals is being repeatedly confirmed in wastewaters and surface waters troughout the whole Europe and other developed countries even though their negative effects for the water ecosystem are known. The target od this thesis is to optimalizethe methods for determination of choosen pharmaceuticals in watewaters in Brno and surrounded area. There was also evaluatedthe hazard level for water ecosystem related to the presence of pharmaceuticals in target matrices which were the wastewaters from wastewater treatment plants in towns Brno – Modřice and from two another towns in south Moravia. Concentrations of the pharmaceuticals were tracked in the influents and effluents. The analytes were isolated from the matrices by solid-phase extraction (SPE) and quantificated by ultra-high performance liquid chromatography (UHPLC) with detection by the diode array (DAD).
|
|
|
Analysis and isolation of intermediates involved in the biosynthetic pathway of alkylproline derivatives
Cudlman, Lukáš ; Bosáková, Zuzana (advisor) ; Michalíková, Klára (referee)
(EN) This work aims at preparation, analysis and isolation of intermediates of biosynthetic pathways of 4-alkyl-L-proline derivatives for their structural elucidation. Compounds with incorporated 4-alkyl-L-proline derivatives include clinically used lincosamide antibiotic, lincomycin A, antitumor pyrrolobenzodiazepines and bacterial hormone hormaomycin. Detailed knowledge of biosynthetic pathways of these biological active substances can be used to prepare new, more efficient derivatives. The first part of this work focuses on yellow-coloured dicarboxylic intermediates 1 and 2 of the biosynthetic pathway of 4-propyl-L-proline - the precursor of lincomycin A. In the presence of the methylation agent, S-adenosyl-L-methionine, and LmbW C- -methyltransferase, 1 was partially converted into intermediate 2. Using ultra-high performance liquid chromatography, both intermediates were identified from absorption and mass spectrometry spectra. A semi-preparative chromatographic method for isolation of both intermediates was developed. Surprisingly, a significantly lower stability of 2 compared to intermediate 1 was observed in an in vitro enzymatic reaction mixture. The second part of the work focuses on 4-ethylidene-L-proline - the precursor of tomaymycin belonging to pyrrolobenzodiazepines. After...
|
|
|
Development and optimization of SPE method for preconcentration and determination of fluorotelomeric alcohols in water
Ševčík, Václav ; Čabala, Radomír (advisor) ; Feltl, Ladislav (referee)
New GC-MS method combined with SPE preconcentration step has been developed and optimized for the determination of selected fluorotelomer alcohols in aqueous samples by advanced statistical method in this thesis. 1H,1H,2H,2H-perfluoro-1-octanol (6:2 FTOH) and 1H,1H,2H,2H-perfluoro-1-decanol (8:2 FTOH) have been selected as the analytes. The influence of several factors, such as the sample volume, the carrier gas pressure, the sampling time and the injector temperature on the system response have been studied during the optimization. Utilizing the statistical software Minitab 16 and series of experiments, the optimal values of relevant factors and a suitable type of ionization were found for both analytes. Limits of detection of GC-MS method are 0.24 ng/mL for 6:2 FTOH and 0.42 ng/mL for 8:2 FTOH. Several factors, such as the type and the volume of conditioning agent, the speed of conditioning, the speed of sample flow, the method of column drying, the type and the volume of eluent have been tested for SPE. The optima of these factors were determined using Minitab 16 software. The extraction efficiency dependence on the concentration and volume of the stock solution was used to set the limitation of SPE for the determination of fluorotelomer alcohols. The maximum volume of sample equals to 400 mL...
|
|
|
Use of Molecular Biology Techniques for Identification and Analysis of Probiotic Bacteria
Konečná, Jana ; Doškař, Jiří (referee) ; Kráčmar, Stanislav (referee) ; Obruča, Stanislav (advisor)
Isolation of deoxyribonucleic acid (DNA) is an important step in the molecular diagnostics of microorganisms. A high quality of isolated DNA is necessary for DNA amplification by the polymerase chain reaction (PCR). The conventional DNA isolation using phenol-chloroform extraction and DNA precipitation in ethanol is time-consuming and requires the use of toxic phenol. Alternative method of DNA isolation is use of commercially available kits which, however, are expensive and their efficiency is low. Magnetic separation techniques using magnetic solid particles are one of modern methods to speed up the nucleic acids isolation. The aim of this work was to use two different types of magnetic particles for solid-phase DNA extraction. Magnetic microparticles P(HEMA – co – GMA) containing –NH2 group and nanoparticles PLL, whitch contains polylysine. The amounts of DNA in separation mixtures were measured using ultraviolet spectrophotometry (UV). The first experimental conditions were tested on chicken erythrocytes DNA. Phosphate buffer (pH 7, 7.6 and 8) was used for adsorption of DNA on magnetic particles. It was shown that approximately almost one half of DNA was adsorbed on the particles. The elution conditions of DNA were also optimized. Secondly, bacterial DNA was tested. After optimalization, the developed method was used for DNA isolation from real food supplements. This DNA eluted from the particles was in PCR ready quality. High resolution melting (HRM) curve analysis is a simple, low-cost method for amplicon discrimination and easy connection with real-time polymerase chain reaction (PCR). In this thesis, we report rapid species identification of strains belonging to the Lactobacillus group using HRM-PCR. Three different DNA isolation methods were used in this work: phenol extraction, separation using magnetic particles and commercial kit. Ten sets of targeted gene fragments primers (LAC1 – LAC2, LAC2 – LAC4, P1V1 – P2V1, Gro F – Gro R, 3BA-338f – Primer 1, V1F – V1R, CHAU - V3F – CHAU - V3R, CHAU - V6F – CHAU - V6R, poxcDNAFw – poxPromRVC, poxcDNAFw – poxPromRVT) were tested for amplification of the 16S rRNA gene. Use of GroF/R and LAC2/4 primers pairs successfully identify strains belong to the Lactobacillus group. The variance between used extraction methods for evidence of HRM curves was found.
|
|
|
PROBIOTIC GENES OF SIGNIFICANT LACTIC ACID BACTERIA IN FOOD
Konečná, Jana ; Ševčovičová,, Andrea (referee) ; Doškař, Jiří (referee) ; Španová, Alena (advisor)
Isolation of deoxyribonucleic acid (DNA) is an important step in the molecular diagnostics of microorganisms. A high quality of isolated DNA is necessary for DNA amplification by the polymerase chain reaction (PCR). The conventional DNA isolation using phenol chloroform extraction and DNA precipitation in ethanol is time consuming and requires the use of toxic phenol. Magnetic separation techniques using magnetic solid particles are one of modern methods to speed up the nucleic acids isolation. The aim of this work was to use two different types of magnetic particles for solidphase DNA extraction. The amounts of DNA in separation mixtures were measured using ultraviolet spectrophotometry (UV). The first experimental conditions were tested on chicken erythrocytes DNA. Phosphate buffer (pH 7, 7.6 and 8) was used for adsorption of DNA on magnetic particles. It was shown that approximately almost one half of DNA was adsorbed to the particles. The elution conditions of DNA were also optimized. Secondly, bacterial DNA was tested. This DNA eluted from the particles was in PCR ready quality. High resolution melting (HRM) curve analysis is a simple, low-cost method for amplicon discrimination and easy connection with real-time polymerase chain reaction (PCR). In this contribution, we report rapid species identification of strains belonging to the Lactobacillus group using HRM-PCR. Three different DNA isolation methods were used in this work: phenol extraction, separation using magnetic particles and commercial kit. Ten sets of targeted gene fragments primers (LAC1 – LAC2, LAC2 – LAC4, P1V1 – P2V1, Gro F – Gro R, 3BA-338f – Primer 1, V1F – V1R, CHAU - V3F – CHAU - V3R, CHAU - V6F – CHAU - V6R, poxcDNAFw – poxPromRVC, poxcDNAFw – poxPromRVT) were tested for amplification of the 16S rRNA gene. Use of GroF/R and LAC2/4 primers pairs successfully identify strains belong to the Lactobacillus group. The variance between used extraction methods for evidence of HRM curves was found.
|
|
|
Analysis and isolation of intermediates involved in the biosynthetic pathway of alkylproline derivatives
Cudlman, Lukáš ; Bosáková, Zuzana (advisor) ; Michalíková, Klára (referee)
(EN) This work aims at preparation, analysis and isolation of intermediates of biosynthetic pathways of 4-alkyl-L-proline derivatives for their structural elucidation. Compounds with incorporated 4-alkyl-L-proline derivatives include clinically used lincosamide antibiotic, lincomycin A, antitumor pyrrolobenzodiazepines and bacterial hormone hormaomycin. Detailed knowledge of biosynthetic pathways of these biological active substances can be used to prepare new, more efficient derivatives. The first part of this work focuses on yellow-coloured dicarboxylic intermediates 1 and 2 of the biosynthetic pathway of 4-propyl-L-proline - the precursor of lincomycin A. In the presence of the methylation agent, S-adenosyl-L-methionine, and LmbW C- -methyltransferase, 1 was partially converted into intermediate 2. Using ultra-high performance liquid chromatography, both intermediates were identified from absorption and mass spectrometry spectra. A semi-preparative chromatographic method for isolation of both intermediates was developed. Surprisingly, a significantly lower stability of 2 compared to intermediate 1 was observed in an in vitro enzymatic reaction mixture. The second part of the work focuses on 4-ethylidene-L-proline - the precursor of tomaymycin belonging to pyrrolobenzodiazepines. After...
|
|
|
Biodegradation of polychlorinated biphenyls in underground water using biological approaches.
Šrédlová, Kamila ; Cajthaml, Tomáš (advisor) ; Innemanová, Petra (referee)
Polychlorinated biphenyls (PCBs) are a class of important organic pollutants which undergo very slow degradation and tend to persist for a long time in the environment. PCBs have various negative effects on living organisms, human health and the environment in general. A method for determining PCB levels in aqueous matrices was developed consisting of solid-phase extraction (SPE) and GC/MS determination. The average recoveries of PCB congeners from artificially spiked deionized water were around 85%. The PCB concentration of 3.3±0.1 μg·l-1 (a sum of selected congeners) was detected in contaminated groundwater originated from the area of a former asphalt concrete producing plant. The most abundant PCBs were trichlorinated congeners which together comprised about 80% of the total PCB content. The optimised SPE method was further applied together with accelerated solvent extraction (ASE) to assess the degradation potential of oyster mushroom (Pleurotus ostreatus) which shows high degradation efficiency of various organic pollutants including PCBs. P. ostreatus belongs to ligninolytic (white-rot) fungi, which is a very promising group of microorganisms frequently studied due to their bioremediation potential. P. ostreatus, strain KRYOS was able to remove 41±8% of the initial amount (50 μg) of the...
|
|
|
Drugs and possibility of their elimination in sewage waters
Křivánková, Zuzana ; Repková, Martina (referee) ; Vávrová, Milada (advisor)
This bachelor thesis deals with issue of increasing consumption of pharmaceuticals and its influence on the environment. In the Czech Republic the pharmaceuticals from the benzodiazepine group are still widely prescribed and used by patients. There was tracked four representatives of this group alprazolam, bromazepam, diazepam and oxazepam which are indicated for therapy of insomnia, psychiatric diseases but also like a general anesthetics or antiepileptics. Presence of this pharmaceuticals is being repeatedly confirmed in wastewaters and surface waters troughout the whole Europe and other developed countries even though their negative effects for the water ecosystem are known. The target od this thesis is to optimalizethe methods for determination of choosen pharmaceuticals in watewaters in Brno and surrounded area. There was also evaluatedthe hazard level for water ecosystem related to the presence of pharmaceuticals in target matrices which were the wastewaters from wastewater treatment plants in towns Brno – Modřice and from two another towns in south Moravia. Concentrations of the pharmaceuticals were tracked in the influents and effluents. The analytes were isolated from the matrices by solid-phase extraction (SPE) and quantificated by ultra-high performance liquid chromatography (UHPLC) with detection by the diode array (DAD).
|
guest ::
