|
|
House with an establishment
Julínek, Dan ; Kalábová, Tereza (referee) ; Šuhajda, Karel (advisor)
The bachelor work contains design documents of a standalone family house with an establishment. This house is situated in the area of Brno-centre, region Brno in parcel no. 1428/1 in the land register of Kohoutovice. Built up area is 164,5 m2. The house is a twofloor,partial basement with an attic. On the ground floor of the living part of the house is designed entrance, vestibule, corridor, bathroom, WC, kitchen, pantry, cojoined dining room and living room, and staircase. In the operational part of the ground floor is designed entrance, waiting room, veterinary medicine, WC for the patients, WC for the working staff, conveniences, dressroom, and store room. In the attic there are situated two rooms, quest bedroom, master bedroom, bathroom, WC, dressroom, study, corridor, and loggia. In the basement there are situated workshop, laundry room, cleaning store room, corridor, and staircase. The building is based on foundation strips made from concrete C16/20, all peripheral frame structures in the basement are designed in BTB bricks, and the elevated frame sturcturesthe syare designes in system Porotherm. Staircase is made as monolithic construction with wood paneling. Roof is a gabled roof of the type „hambalek“ construction. Roof slope is 35° with ceramic tile of „Tondach Figaro 11“.
|
|
|
TWO-GENERATION DETACHED HOUSE
Šmíd, Václav ; Zuzana, Stránská (referee) ; Balíková, Jitka (advisor)
This is a detached two-generation house in a partially built-up area. The building is situated in the village of Kobylnice, that lies approximately 15 km south-east from Brno. The building has two floors without cellar. Ground floor dwelling unit is meant for a family with two childern. There is entrance hall with dressing room, WC, bathroom, parents´ bedroom, bedroom for childern, living room with study and kitchen with dining room. There is also ground-level terrace accessable from childern´s room and kitchen with dining room. Second floor dwelling unit is meant for a married couple. There is entrance hall and staircase, room for household choirs with dressing room, WC, bathroom, bedroom, living room, kitchen with dining room, pantry and terrace. There is also a common garage with parking space for two cars. The house is based on strips made of plain concrete and is built of the Porotherm building system. Skillion roof is pitched with an inclination of 7°. Roofing tile is standing seam sheet steel Lindab Click. Built-up area is 228,4 m2. There is also included a seminar paper on the topic: Structures of roof cladding for various kinds of roofs according to ČSN 73 1901.
|
|
|
House with motoservis
Vlček, Jan ; Jarošová, Petra (referee) ; Berková, Petra (advisor)
The project processes technical documentation of a detached family house with motoservis in the newly pulled over territory. The building i located in Lysá nad Labem. The building has two floors and no basement. In the first floor there is the workshop – motoservis for the homeover. The house has a garage with parking for one car. The house is based on the underlying strip of plain concrete and walled building sytem Porotherm. The roof of the second floor is shed with a slope of 10%. Roofing is skived metal. The roof of the first floor is designed as a flat with minimum slope 3%. It is designed for walking.
|
|
|
Apartment building - Brno
Zukal, Zdeněk ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
The subject of the diploma thesis is to elaborate the design documentation of an apartment house with restaurant. The building is designed in the village of Lipůvka, South-Moravian region, on plot No.: 544/1 and 545/1 – cadastral region Lipůvka. The bulit-up area is 443,3 m2. There are four floors. There is restaurant, one housing unit (for persons with reduced mobility) and utility room in first above-ground floor. Second, third and fourth above-ground floor is for housing. Each of these three floors has three apartments – two apartments 3+k, one apartment 3+1. Entrance to every apartment is from main staircase. The building is based on the foundation walls of concrete C20/25, all vertical walls are from Porotherm System. Celings are composed of ceramic-conrete beams POT, ceramic insertion Miako and concrete. The staircase is monolithic reinforced concrete. The building is without basement, roofed by a warm flat roof.
|
|
|
The administrative object
Kučera, Filip ; Sedlák, Radek (referee) ; Beneš, Petr (advisor)
The final thesis deals with design of new administrative object. The administrative object is located in edge part of Znojmo city. The building is situated in built-up area, which is used for housing and services. The building is accessible as a detached house on a slightly sloping territory. It is a four-storey house with a cellar, terminated by a warm flat roof, which has three-storey and basement. On the above ground floors are located offices and their associated spaces, staff facilities and toilets. On the third floor there is a terrace for employees’ stay in the summer months. On the third floor there is a collective garage with twenty parking spaces too. The individual floors are accessed via the main staircase and elevator. The building is designed as reinforced precast concreate frame and is based on prefabricated reinforced concrete foundation pads. The infill and internal wall are designed from the Porotherm building system.
|
|
|
Multifunctional house
Šeda, Kamil ; Donaťák, Vladislav (referee) ; Donaťáková, Dagmar (advisor)
The aim of my diploma thesis is a plan of a multifunctional house. The proposed building is designed in low-energy norm. The shape arrangement is an irregular rectangle, covered by two flat roofs. One of the roofs serves as a terrace. It is a five-storey building. Half of the ground floor serves as offices and the other half as an utility space for the flats above. The other four floors are for housing. Aforementioned building is located in Třebíč, in the area Na kopcích, on Modřínová street, plot No.1039/7. Vertical and horizontal construction are designed from POROTHERM building system. The building is based on a concrete foundation slab.
|
|
|
Family house with offices
Zdražil, Ondřej ; jun, Josef (referee) ; Čuprová, Danuše (advisor)
The objective of this bachelor thesis is a working out of project documentation of building „The family house with office” containing all the requirements according to currently valid orders and standards. This object is a detached brick-work building with a flat one-surface roof and two over-ground floors, without a ground floor. The house is designed for family of four. First floor: entrance room, hall, boiler room, bath-room and WC, pantry, kitchen with dining room, living room, staircase, store, garage, WC, entrance hall and office. Second floor: hall, WC, bath-room, bedroom, study, two rooms for children and terrace. The family house is designed in the POROTHERM building system and house is insulated by Baumit Open facade system.
|
|
|
Family house
Zukal, Zdeněk ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
The bachelor work contains design documents of a standalone family house. This house is situated in the village Lipůvka, region Blansko in parcel no. 662/69 in the land register of Lipůvka. Built up area is 231,3 m2. Family house is two-stroyed, partial basement with an attic. On ground floor is designed entrance, vestibule, bathroom, WC, kitchen, pantry, dining room, tercce, living room, staircase, corridor, quest-room, garage, workshop, dressroom. In the attic are situated three rooms, bedroom, bathroom, WC, dressroom, loggia. In the basement are situated laundry room, boiler room, warehouse appliance. The building is based on foundation strips made from concrete C20/25, all frame structures are designed in the system Porotherm. Staircase is made as monolithic construction with wood paneling. The roof is gabled roof with type of „hambalek“ construction. Roof slope is 35° with ceramic tile of „Tondach Francouska 14“
|
|
|
The administrative object
Kučera, Filip ; Sedlák, Radek (referee) ; Beneš, Petr (advisor)
The final thesis deals with design of new administrative object. The administrative object is located in edge part of Znojmo city. The building is situated in built-up area, which is used for housing and services. The building is accessible as a detached house on a slightly sloping territory. It is a four-storey house with a cellar, terminated by a warm flat roof, which has three-storey and basement. On the above ground floors are located offices and their associated spaces, staff facilities and toilets. On the third floor there is a terrace for employees’ stay in the summer months. On the third floor there is a collective garage with twenty parking spaces too. The individual floors are accessed via the main staircase and elevator. The building is designed as reinforced precast concreate frame and is based on prefabricated reinforced concrete foundation pads. The infill and internal wall are designed from the Porotherm building system.
|
|
|
Multifunctional house
Šeda, Kamil ; Donaťák, Vladislav (referee) ; Donaťáková, Dagmar (advisor)
The aim of my diploma thesis is a plan of a multifunctional house. The proposed building is designed in low-energy norm. The shape arrangement is an irregular rectangle, covered by two flat roofs. One of the roofs serves as a terrace. It is a five-storey building. Half of the ground floor serves as offices and the other half as an utility space for the flats above. The other four floors are for housing. Aforementioned building is located in Třebíč, in the area Na kopcích, on Modřínová street, plot No.1039/7. Vertical and horizontal construction are designed from POROTHERM building system. The building is based on a concrete foundation slab.
|
guest ::
