|
|
PLC system for Smart Metering
Bijotová, Kateřina ; Sláčik, Ján (referee) ; Mlýnek, Petr (advisor)
This thesis deals with PLC communication, presents pros and cons of this technology. The thesis describes several basic standards of the narrowband communication and broadband HomePlug AV2 standard. It groups the technology according to frequency band. Also, it brings summary of commercial products and development kits which are using PLC technology. The thesis contains the description of network testing to RFC 2544 recommendation and its application onto narrowband Linksys PLEK500 modems using NetBlazer tester which took place in laboratory of Brno University of Technology’s Department of Telecommunications. The same PLC modems are used in a second series of experimental measurements in home environment. This thesis also deals with comparison of narrowband PLC standards PRIME and G3 whilst exposed to different transmission conditions as defined by pre-established measurement scenarios. Said comparison was attained by measurements using Atmel’s multi-carrier PLC kit SAM4CP16C-EK. In the closing section of the thesis the results obtained by said measurements are consulted with conclusions provided by contemporary PLC-oriented publications.
|
|
|
The use of Computers in the Number Theory
Konečný, Zdeněk ; Karásek, Jiří (referee) ; Skula, Ladislav (advisor)
PARI/GP is a relatively obscure mathematical software that was designed especially for quick calculations in the number theory, but which has also found its application in other areas of mathematics. This work gives an overview of the basic commands of PARI/GP, and some simple examples to show their potential use. PARI/GP is then used for looking for large primes of special forms.
|
|
|
Hierarchical Techniques in Lighting Computation
Ligmajer, Jiří ; Polok, Lukáš (referee) ; Navrátil, Jan (advisor)
This master thesis deals with description of hierarchical techniques in global lighting computation. Here is explaining the importance of hierarchical techniques in lighting computation and shows method, how to use these hierarchical techniques in realtime radiosity and its extension to dynamic area lighting. These two techniques are described in detail in the first part of this project. In the other part is desing and implementation of application for dynamic area lighting computation.
|
|
|
PLC for Smart Metering
Houser, Milan ; Rusz, Martin (referee) ; Mlýnek, Petr (advisor)
This bachelor’s thesis deals with the technology communicating over the electrical power grid, PowerLine Communication (PLC). It solves the principles, possibilities of use, ad-vantages and disadvantages of this technology. The basic issues of communication of PLC networks, Smart Grid and Smart Metering on narrowband PLCs with multiple carriers on the PRIME and G3 standard are discussed. At the end of the work there are measurements on Atmel and Devolo devices. A laboratory task was also created here, which deals with the measurement of narrowband transmission.
|
|
|
High Data Rate Narrowband PLC Communication based on OFDM
Csiba, Patrik ; Herencsár, Norbert (referee) ; Mlýnek, Petr (advisor)
This bachelor project is about narrowband PLC communication. In this project is described history, principle of narrowband communication and description of four available narrowband standards (PRIME, G3-PLC, G.hnem, IEEE P1901.2) with their comparisons. In the next part are described the experimental measurements, that are performed in home environment with use of the TMDSPLCKIT modems from the Texas Instruments company, MT39-L1-ver.R modems from the ModemTec company and EVALKITST7580-1 modems from the STMicroelectronics company.
|
|
|
Narrowband PLC communication for Smart Metering
Kubů, Jiří ; Blažek, Petr (referee) ; Mlýnek, Petr (advisor)
This bachelor project is about narrowband PLC communications. The work describes the basic principle, division of PLC communication, history, technology, utilized communication standards and interference affecting the data communication technology. In this work we also performed experimental measurements in real environments with modems from Texas Instruments C2000 and C2000 TMDSPLCKITV4 PLC PLC TMDSPLCKIT-V3. The results of the measurements are real transmission rate. Moreover application was created for remote data collection along with PLC modems C2000 PLC TMDSPLCKIT-V3, the aime was to edit PLC modem firmware and create applications for receiving data from the terminal.
|
|
|
Modem for powerline communication
Sláčik, Ján ; Mlýnek, Petr (referee) ; Kolka, Zdeněk (advisor)
This bachelor thesis is dealing with the standards and usable circuits applications for a powerline communication, which are currently available. Principle of this kind of communication is described for default supply network 230 V/50 Hz. This work is also describing several available modems which can be used for this type of communication. The properties of the standards PRIME and the G3-PLC, which are presently at disposal, are specified, measured and compared with each other in this project. The concentrator based on the G3-PLC standard extended about radio interface was designed. Afterwards this device was tested in various topologies and interference scenarios. The graphical interfaces, which allow the transfer measurements in multiple modes are described is this work as well. The entire measurements were realized in a real conditions for both tested modems. The results of these measurements are validating the purpose of each standard and its configuration.
|
|
|
Electronic control units of present SI-engines
Michna, Lukáš ; Beran, Martin (referee) ; Dundálek, Radim (advisor)
Bachelor’s thesis named „Electronic control units of present SI-engines” treats of presently known and extended electronic control systems of SI-engines, so those ones, who mainly control both fuel-air mixture preparing and its ignition in combustion chamber. These are two fundamental functions for engine running, so they are described in light of basic principle of operation and also in light of each kind of these systems and its developmental stage description. Next point is enumeration and description of single parts of electronic control system participating in engine controlling, separated to logic sections. The end of publication makes reader acquainted with most extended types of electronic control systems, their producers and elementary differences.
|
|
|
Bioinformatics Tool for Protein Structure Prediction
Plaga, Michal ; Burgetová, Ivana (referee) ; Martínek, Tomáš (advisor)
The goal of this thesis is test and comparation of the offline tools for prediction of protein structure and creation of metaprediktor, which allows the user to select the appropriate tool, according to given parameters. Testing tool is based on a dataset of proteins, which is based on the SCOP database and it is trying to be as balanced as possible to include proteins from different families and thus could best evaluate individual tools. The results of this thesis are requirements of metaprediktor and also which data and settings can be allowed and processed and how it will be implemented.
|
|
|
Production of bevel gears.
Nepauer, Jan ; Zemčík, Oskar (referee) ; Zemčík, Oskar (advisor)
helor thesis and describing the distribution of production technologies bevel gear machining and forming methods. These methods are detailed below. In this paper we theoretically describe the tool against the workpiece. Evaluation of different methods and comparing them against the costs, depending on the capabilities of each individual company.
|
guest ::
