|
|
Civic amenities building
Nebáznivý, Tomáš ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of this diploma thesis is a preparation of part of the project documentation providing information for the construction of a nearly zero energy kindergarten. The building is located in the western part of the city Havlíčkův Brod, in the part of the city called Rozkoš. The building has two above-ground floors and it is partially basement. The kindergarten has two classes for children. These classes are located in one of the one-story wings of the building. The building has a canteen with a food preparation area and serving hatch window. The construction system of the building is designed as a brick masonry bearing wall system. Horizontal load-bearing structure consists of reinforced prestressed hollow ceiling panels. The roofing of the building is solved by a single-layer flat green roof. The building is equipped with a certified contact thermal insulation system.
|
|
| |
|
|
Solar cooling system
Klusák, Jan ; Fortelný, Zdeněk (referee) ; Pospíšil, Jiří (advisor)
The work is focused on the issue of cold production using absorbent circulation driven by thermal energy solar collectors recovered. The work can be divided into several main parts. In the first part of this work is given an overview of the possible principles of solar cooling system. In the next section followed by a description of the principle of absorption cycles. In the practical part is solved design proposal absorption refrigeration units with a cooling power of 6 kW. This is followed by a proposal to link solar cooling system with the absorption unit. Final section is made of basic technical-economic comparison of solar refrigeration unit with the compressor refrigeration units.
|
|
|
Multifunctional building
Peška, Tomáš ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The subject of the diploma thesis is a project documentation of a multifunctional building within the scope of the implementing documentation. The main goal of the thesis is the design of the layout, construction and material solution, completed by design of the fire safety solutions and assessment in terms of building physics. The multifunctional building has one underground floor and nine above-ground floors. In the basement there are technical facilities of the building and a parking area, in the 1st floor there are business premises, in one part of the 2nd floor there is a gym and the remaining areas are used for administrative purposes as well as the entire 3rd to 9th floor. The construction system is designed as a reinforced concrete monolithic skeleton, completed by a reinforced concrete core. Ceiling structures are monolithic reinforced concrete locally supported slabs. The building is founded on the concrete slab placed on drilled shafts. The main element of the outer wall is curtain walling, which is made from a mullion-transom system.
|
|
|
Energy-saving kindergarten building in Trutnov
Lacko, Martin ; Uher, Pavel (referee) ; Blasinski, Petr (advisor)
The aim of this master's thesis is to propose the construction of a new kindergarten with almost zero energy consumption. The building is purposefully divided into three parts, with one part serving as facilities for staff, the second part consisting of classrooms for children, and the third part comprising a speech therapy clinic. The thesis is divided into three parts. The first part focuses on the design of the structural solution, which involves a single-story, without basement structure. Load-bearing vertical structures are made of aerated concrete masonry, and horizontal load-bearing structures consist of hollow precast Spiroll panels. The building's roof is designed as a flat, single-layer, extensive green roof. The second part is dedicated to the design of the HVAC system. A heat pump air/water system is proposed as the source of heating and cooling, with a gas boiler as a bivalent source. The heating of the building will be provided through radiators, except for the classrooms, which will have floor heating. Air exchange is ensured through mechanical ventilation with heat recovery. Additionally, a hybrid photovoltaic power plant on the roof partially supplies the building with electricity. The third part involves an experiment on a ventilated facade, where temperature measurements in the air gap are conducted. The result is a comparison between an open ventilated facade and a closed ventilated facade.
|
|
|
Use of renewable resources for a multifunctional house
Andrš, Matěj ; Počinková, Marcela (referee) ; Formánek, Marian (advisor)
Master thesis deals with the design of a new multifunctional building. The theoretical part introduces heat sources, discussing their basic properties and types. The computational part describes a specific heating system design for the extended building permit and the design of individual components in the heating system. A ground/watter source heat pump is proposed as the heat source, with heat extracted from the ground through deep wells. The building will be heated using underfloor heating. The technical report then outlines the requirements and technical specifications. The project documentation is provided in the attachments. The experimental part of master thesis focuses on the operation of an air/water heat pump, aiming to investigate how the heat pump performs in relation to outdoor temperatures compared to supply temperatures. The operating times of individual parts of the heat pump were then evaluated. This section includes graphs and the results obtained.
|
|
|
Sports Center
Borchová, Karin ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
This master thesis deals with designing sports center in Havlíčkův Brod. It is an individually standing object, which is located on plot No. 653/1 in Havlíčkův Brod, in cadastre unit Havlíčkův Brod. The object of the sports center has two above-ground floor and basement. In the basement are designed storage spaces and underground garage. Vertical structures are made of cast-in-place reinforced concrete frame, space between columns is made of ceramic blocks and reinforced water-resistant walls. Horizontal structures are made of cast-in-place reinforced slabs. The foundations are designed as a cast-in-place foundation slab serves waterproofing basement. The roof is designed as a warm flat green roof. The building is insulated with contact thermal insulation system. The work includes project documentation for the construction.
|
|
|
Police district department of the Czech Republic, Brno-Černovice
Vaníček, Marek ; Kacálková, Lenka (referee) ; Kacálek, Petr (advisor)
The subject of the master thesis is design of a new detached office building for public administration of Czech Republic Police as a district department in Brno-Černovice. It is presented as a form part of project documentation for a building construction. The building has a cellar and two above-ground floors. It is founded on a strip foundation and pads. The building is roofed by green roof. There are office rooms, sanitary facilities, archives, interrogation rooms, pre-trial detention cells, garages, storage rooms and dog cages in the above-ground part. In the basement, there are technical facilities and shooting range backround. Structural system of the building is wall longitudinal masonry system from clay blocks. The ceiling structure is from cast-in-place reinforced concrete. The part of the building is with ventilated facade a nd rest is insulated with contact thermal insulation.
|
|
|
Control of manipulator model
Simon, Jakub ; Jirgl, Miroslav (referee) ; Zezulka, František (advisor)
The task was to study the physical model of the coordinate manipulator. It is controlled by two stepping motors by Schneider Electric and Beckhoff¨s industrial IPC. Then get to know the TwinCAT control software communicating on the EtherCAT network. Then revive the model and create a task to illustrate the functionality of the model with a simple ON / OFF third axis, as well as revive the industrial camera. Then create your own design of a full-fledged third axis and let it be realized. Finally, create an illustration application with the full-fledged third axis manipulator.
|
|
|
Design and implementation of demonstration model "double inverted pendulum"
Slabý, Vít ; Brablc, Martin (referee) ; Bastl, Michal (advisor)
This thesis describes the process of rebuilding an experimental model of a single pendulum on a cart into the double pendulum on a cart. The control algorithm in MATLAB/Simulink environment for stabilization of the pendulum in the inverse position is designed. For this purpose, LQR state feedback control was implemented. Also method for swinging the pendulum into inverse position from stable state (swing-up) was designed. Feedforward method was utilised for swing-up control. In the thesis, functionality of these algorithms is shown.
|
guest ::
