|
|
Analyse of photovoltaic solar cells by the photoluminescence method
Baura, Tomáš ; Bača, Petr (referee) ; Vaněk, Jiří (advisor)
This thesis deals with the analysis of solar cells by photoluminescence method. Photoluminescence method is based on the excitation of luminescence radiation of the solar cell material by an external excitation light source. This method can detect various types of defects in the material solar cells. The main objective is the design and realization of a measuring system defects of solar cells, which is based on this method. For excitation of luminescence is used LED array. For the detection of luminescence is used CCD camera with IR optical filter. To filter out the excitation light radiation is used disc screen and optical interrupter. The parameters and options of this measuring system are verified and characterized by test measuring for example the achievable rotation speed of screen and response of optical interrupter. At the end is tested detection of luminescence radiation of solar cells in the measuring system. The measured images are compared with the method of electroluminescence.
|
|
|
Design of Experiment
Lachnit, Zdeněk ; Bednář, Josef (referee) ; Kotek, Luboš (advisor)
The main subject of this master thesis is to evaluate using of Design of Experiment in industrial company in the development of LED modules for cars. In background study Design of Experiment methodology is described. Next part of background study describes the general principles of termography measurements, next chapter includes the information’s about LED technology and temperature degradation. At the beginning of the practical part is a description of the team analysis due to selection of factors, next chapter validates importance of vias. In next chapter methodology of print circuit board preparations and measuring are described. A next chapter describes the implementation of design of experiment at voltages 8 V, 13,5 V, 16,5 V. Designs of Experiments were made for four or five factors. The reason for this decision was the manual adjustment of printed circuit boards. At the end of each Design of Experiment is the recommendation of factors and interactions settings with regard on response, which is the minimal temperature. At the end of master’s thesis is the final evaluation.
|
|
|
Monocrystalic silicon - optical properties
Kahánek, Tomáš ; Vaněk, Jiří (referee) ; Špinka, Jiří (advisor)
This diploma thesis deals with optical properties of silicon. The main task of the work was to create silicon samples with ohmic contacts. Suitable radiation source was designed to measure absorption edge of monocrystalline silicon. Designed measuring station was realised. Measurements were performed on samples of p-type monocrystalline silicon provided by ON Semiconductor Rožnov. p. Radhoštěm. The absorbtion edge was measured.
|
|
| |
|
|
Wireless optical link
Haňka, Jiří ; Hudcová, Lucie (referee) ; Poliak, Juraj (advisor)
This thesis is aimed at section of transmission of digital data by using two optical wireless communications realized by two free-space optics transcievers working in full-duplex mode. Generally, the work describes present options of optical connections, their principles and comparison with other connections. Basic components of realized transmitter and receiver are mentioned with their characteristics and wirings. The work describes options of transmission and further deals with various external events, which influence characteristics of transmitted optical signal. Thesis describes the optical part of design and construction free-space optic and it’s ending energy balance of this link. Further, the work treats of basic use of ethernet technology in transmissions, coding and modulations of data transmitted by optical connection.
|
|
|
Comparison of pulse oximeters
Karafiátová, Pavla ; Harabiš, Vratislav (referee) ; Kolář, Radim (advisor)
This work deals with the pulse oximetres. The thesis describes the methods of measuring oxygen in blood and basic parts of pulse oximeter. It follows introduction to light absorbancy based on Beer’s law and its usage in pulse oximetry. The thesis also describes different probes and its properties and also algorithms for signal processing. Measuring and evauating on tester SECULIFE and volunteers is part of this thesis.
|
|
| |
|
|
Utilization of light emitting diode lighting for cycle tracks
Mikula, Martin ; Klapka, Milan (referee) ; Paloušek, David (advisor)
This bachelor’s thesis deals with construction of the illuminational modules for cycle tracks. Result is design of lamp for lighting at cycle tracks, staffed by the LED diodes. Single parts bachelor’s thesis are: - text report on the development and current state lighting - development LED diodes in the world -analysis my project - computer visualizations of the final design and technical documentation
|
|
|
Study of the thermal and light conditions in the automobile headlamp with built-in light source of the new generation
Zachar, Martin ; Černý,, Pavel (referee) ; Černý, Pavel (referee) ; Raudenský, Miroslav (advisor)
This thesis deals with automotive headlamps, focusing on layout of temparature field and its influence on thermal stress of used materials, describes their history, kinds and ongoing research. Thesis shortly describes light and its characteristics, heat and heat transfer and means of temperature measurement. Main part of the tesis is dedicated to measuring front headlamp serving as a fog light, concretely measuring temperature field and illuminance depending of ambient temperature. Thesis contains everything from the first preparations, creation of measuring circuit, programming of measuring to processing acquired data. Thesis also compares cooler used for cooling luxmeter sensor, the comparision is between measured values and created simulation.
|
|
|
Control and monitoring of parameters in microfluidic systems
Meloun, Jan ; Sekora, Jiří (referee) ; Čmiel, Vratislav (advisor)
This thesis discusses the construction of Microfluidic systems for a microscope. The theoretical part of this thesis deals with light, light’s behaviour and optical spectral analysis in some methods are discussed. Also, the use of the development platform Arduino with wireless data transfer for data visualization is mentioned. Methods for measuring pH are mentioned as well. The practical part is dedicated to the construction of the Microfluidic system with the use of Arduino, smart mobile devices and a developed mobile application including controlling liquid flow with the measured data visualization.
|
guest ::
