|
|
Apartment building
Hlásenský, Marek ; Leischnerová, Jana (referee) ; Brukner, Bohuslav (advisor)
The bachelor thesis deals with the project documentation for the construction of a residential building in Brno in the Brno – Žabovřesky district. The building is detached in a slightly sloping terrain in Podveská street. The residential building has four floors and a partially buried basement. In the basement are designed garage parking spaces, cellar cubicles and technical background of the building. There are a total of 11 residential units on the above-ground floors, 3 residential units on each floor (2×1kk and 3kk) except for the last floor, where there are only 2 residential units (1kk and 4kk). The house is designed as wheelchair accessible. The construction system of the apartment building is wall-based: the basement is made of a combination of monolithic walls and columns, and the brick floor is made of ceramic blocks. The horizontal structures consist of reinforced concrete monolithic slabs with one-way or two-way reinforcement. The perimeter walls are insulated with the ETICS contact insulation system. The foundation of the building is made on foundation strips and the roofing consists of a green flat roof.
|
|
|
Residential building
Bednár, Zdenko ; Vlach, František (referee) ; Vajkay, František (advisor)
This bachelor thesis is focused on the development of project documentation for the construction of a residential building with nearly zero energy consumption. The aim of the work was to design the building disposition with an appropriately chosen structural and material solution. The residential building is designed on a plot of land located in the northern part of the city of Brno, in the borough Líšeň. The plot of land is characterized by its slightly sloping terrain. The residential building is a free standing building with a rectangular floor plan. The building has 5 floors, where one floor is a collective garage with technical equipment and the other four above-ground floors contain residential units with storage spaces. The above-ground floors consist of a total of nineteen residential units. Parking places with a total of 32, are located in the collective garage and in front of the building. The structural system of the building is designed as a transverse skeleton, supplemented by a wall system on the above-ground floors. The perimeter walls are made of acoustic lime-sand blocks, which are supplemented with mineral wool. The building will be roofed with a single layer green flat roof with extensive greenery. The appearance of the building will be formed by a neutral white plaster, which will be supplemented by anthracite plaster elements in the balcony area. The appearance of the building will be complemented by anthracite window frames, doors and tinkering products. As part of the work, assessments of heating technology, acoustics, lighting and fire safety were carried out. All requirements set by the standard were met.
|
|
|
Apartment Building
Nedomanský, Vojtěch ; Zichová, Barbora (referee) ; Lavický, Miloš (advisor)
The aim of the bachelor's thesis is to design and develop project documentation at the construction implementation level for an apartment building. The subject of the bachelor's thesis was the appropriate use of structural, thermal-technical, and material solutions. It is a basement four-story apartment building of irregular shape, which contains a total of 13 apartment units, with each apartment unit assigned a basement storage room located in the basement part of the building. The building is founded on strip foundations and a base slab. The vertical load-bearing system of the above-ground floors consists of Therm-type ceramic blocks with a certified contact insulation system. The vertical load-bearing system in the basement floor is made using lost formwork blocks filled with concrete. Therm-type acoustic blocks are used for the internal load-bearing walls. Monolithic reinforced concrete ceiling slabs were designed as the ceiling structure. The apartment building is roofed with a single-layer flat green roof with a constant slope, which is prepared for the placement of photovoltaic panels to utilize alternative energy sources.
|
|
|
Commercial center Miris Garden in Croatia
Žilková, Monika ; Doležal, Ondřej (referee) ; Novák, Petr (advisor)
The subject of the bachelor thesis is preparation of project documentation for building permits and part of the documentation for the implementation of construction based on the assignment, which was provided in the course BGA032 - Architectural Design Studio 4. The topic of the study is a design of a new building of the commercial center Miris Garden in Croatia near the town Starigrad. The building is to form the main point of the newly built resort on the sloping coast of the Adriatic Sea. The commercial center is to fulfill a commercial function (with several smaller shops and gastro businesses) and in part of the building also an administrative function, where offices are available for the management of the center and for tenants. The three buildings forming a unified whole are designed in the shape of two central hexagons, creating a space imitating a shopping street. It then culminates in a square with a view of the sea. The center has a total of three floors, which, however, are fitted into the terrain in such a way that when viewed towards the sea it looks like a single-storey building, so it does not disturb the views of the surrounding villas. The new building will be located in an open landscape, so its construction and operation will not disturb any nearby residents in any way.
|
|
|
Residential building
Šeps, Daniel ; Bartlová, Jana (referee) ; Vajkay, František (advisor)
The subject of the bachelor thesis is the design of a new building of a detached apartment building in Nová Paka in the form of project documentation for construction. The buiding is designed brick with reinforced concrete ceilings. Perimeter walls on the 1st – 3rd floor is designed ceramic brick blocks th. 300 mm with contact thermal insulation system ETICS th. 200mm, which will be equipped with silicone plaster 1,5mm. Perimeter walls on the underground floor is designed permanent shuttering DITTON 30 th. 300mm, filled with concrete C20/25 XC1 and by steel B500B insulated with extruded polystyrene XPS th. 160mm. Internal load-bearing masonry wall is designed with acoustic ceramic brick blocks th. 250 mm. Partitions are designed from acoustic partition walls. On the ceilings is a hardwood flooring because of excellent acoustic characteristics. The roof is designed as a flat green roof with extensive vegetation and with thermal isolation of minera wool and with waterproofing layer made of bituminous modified SBS strips laid in two layers. Balcony railing is designed aluminous with safety glass paneling.
|
|
|
New apartment building
Křičenský, Adam ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
The subject of the bachelor’s thesis is the processing of the design documentation for execution of an apartment building. Designed building is located in Hrochův Týnec. The access to the building is from the south. The plot is flat and it disposes with parking places for nineteen cars. It is a building with three above-ground floors and partial basement that is designed with a total 8 dwelling units. The structural system of the designed building is wall system. All vertical structures are made of clay brick. The exception are external walls in the basement, that is designed of concrete blocks (permanent formwork). The horizontal structures are designed of prefabricated rib-and-filler floor that is made of ceramic concrete ceiling beams, ceramic inserts and overconcrete. The conection structure of the building is the cast-in-place reinforced concrete staircase. The roof is designed as a green flat roof in combination with the walkeble flat roof. The roof above the stairwell is designed as a non-walkeble flat roof. The thermal insulation of the whole object is made of the ETICS certified contact thermal insulation system. The apperance of the building is completed by facade colours that are selected in shades of white, light gray and dark gray.
|
|
|
Futurama Theatre
Maslák, Michal ; Mizera, Pavel (referee) ; Smolka, Radim (advisor)
It is a multi-storey detached cultural and dining building. The theatre is dimensioned for 615 seats and the restaurant is dimensioned for 150 dishes. The construction will be situated in the town Ostrava, namely in town part Ostrava-Poruba having 64 728 inhabitants. Build-up land area is 3819 m2 and capacity amounts to 60 676 m3, it has one underground and four above-ground levels. The building is covered by green flat roof.
|
|
|
Civic amenities building
Brázdová, Kateřina ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
Mixed-use building in Prostějov The aim of this master´s thesis is to elaborate the project documentation of a mixed-use building in Prostějov. The thesis consists of three parts: architectural-construction part, building services and elective part. The building has two above-ground floors. On the first floor there are storerooms, utility room, sanitary facilities and restaurant with kitchen and storerooms. The second floor is an office floor for one company which includes offices, dayroom, copyroom, meeting room and sanitary facilities. The building is founded on reinforced concrete foundation. The horizontal load-bearing and non-load-bearing structures are designed from ceramics blocks. The building is insulated by ETICS. The vertical load-bearing structures are designed from Spiroll slabs. The building has a green flat roof. There are parking spaces on the grounds. The building will be heated and cooled with a heat pump. It will also have an air condition. Part of electricity demand is covered by photovoltaics. In the third part of thesis, I replace frequently used materials with environmental ones in my project and compare them in terms of thermal engineering, acoustics and price. I used DEKSOFT, Hluk+, Autocad and Revit software. All structures comply with the valid standards and regulations.
|
|
|
Headquarters of racing team
Jakeš, Miroslav ; Donaťák, Vladislav (referee) ; Donaťáková, Dagmar (advisor)
The subject of this thesis is Headquarters of racing team. The building is designed wall system porotherm, ceilings are monolithic concrete and roofing of the building is a combination of green flat roofs and single-flat roof with steel trusses. The building is designed as a single-storey, only part of the plan of the hall is a two-storey building. The building consists of two functionally separate parts.
|
|
|
Multifunctional building
Culík, Tomáš ; Řezníček, Petr (referee) ; Hradil, Dušan (advisor)
Diploma thesis is the project of a six-storey multifunctional building in Brno. The building is designed for commercial and housing. In the basement is a garage for residents with a technical room, first floor are commercial spaces such as cafes, bike shop, newspaper shop, bakery, then there is the entrance to do the apartments which are located in the remaining upper floors. Each residential floor has 6 apartments, 4 three-room and 2 four-room apartments. There is a total of 24 apartments. Housing has green flat roof, above the underground is operational flat roof with a parking area. This project is developed with a computer software AutoCAD, 3D models are developed with ArchiCAD and renders are developed with rendering software Lumion. This thesis was created with an emphasis on a correct layout and architectural design, static requirements and safety construction usage.
|
guest ::
