|
|
Design of formula SAE front axle
Honzík, Tomáš ; Blaťák, Ondřej (referee) ; Porteš, Petr (advisor)
My thesis will be aimed at front axle design. I am going to design the assembly of the front axle in the program ADAMS by MSC. I am going to observe and record most of cinematic changes of the car such as change of position of vehicle roll centre ,wheel camber, geometry adjustment , wheel toe-in measuring and other necessary data. The final report is going to include strength calculation of particular axle parts. I am also going to solve the axle stabilizer including strength calculation.
|
|
|
Bodywork Design of Formula Students Car
Malík, Jiří ; Pelikán, František (referee) ; Zvonek, Miroslav (advisor)
Diplomová práce pojednává o návrhu kapotáže vozidla Formula Student. Vozy této kategorie se každoročně učástní série mezinárodních závodů všech zůčastněných studentských týmů. Úroveň návrhu se posuzuje jak v dynamických tak ve statických disciplínách. Tato práce popisuje proces návrhu tří koncepčních variant společně s rozpracováním finální varianty pro fázi výroby. Navíc je zde prezentován koncept obsahující aerodynamický paket, který slouží jako výhledová studie možného vývoje vozidla.
|
|
|
Magnetorheological damper for Formula Student
Dlápal, Václav ; Strecker, Zbyněk (referee) ; Mazůrek, Ivan (advisor)
The master thesis deals with design, manufacturing and testing of a prototype magnetorheological damper developed for Formula Student vehicle. The aim was to design and test the damper with similar damping properties to the vehicle as a conventional damper has. Target force-velocity curves were set using quarter car model and evaluated comparing minimal contact force of a tyre for conventional and newly developed damper characteristics. Structural analysis of designed parts, hydraulic and static magnetic analysis were performed. Manufacturing of a specific part magnetorheological damper part was described – piston. Manufactured prototype damper characteristics were evaluated.
|
|
|
Formula SAE aerodynamic optimization
Fryšták, Lukáš ; Lajza, Ondřej (referee) ; Popela, Robert (advisor)
Tato práce se zabývá měřením aerodynamických charakteristik modelu závodního vozu Formula SAE v aerodynamickém tunelu, v měřítku 1:4. V první části je představen projekt Formula SAE a popsána role aerodynamiky v rámci této soutěže. Následuje přehled teoretického pozadí, které je relevantní k provedenému experimentu. Ve druhé části práce je popsán samotný experiment a prezentovány jeho výsledky. Součástí je návrh, výroba a kalibrace šestikomponentní tenzometrické váhy pro měření aerodynamického zatížení. Testy v aerodynamickém tunelu byly provedeny ve čtyřech konfiguracích, aby bylo možné určit vliv přítlačných křídel a podlahy s difuzorem na výsledné aerodynamické charakteristiky vozu.
|
|
|
Drivetrain of Formula Dragon 3
Matajsz, Petr ; Janoušek, Michal (referee) ; Svída, David (advisor)
This master thesis deals with the structural design of the drivetrain for the formula Dragon 3. There is shown an overview of the most common design solutions used in the category Formula Student. On that basis is made my own concept of the drivetrain. Major focus is placed on the design of the final drive, differential mounting including chain tensioning mechanism and design of related components. For the designed components was made stress analysis by FEM.
|
|
|
Formula SAE Drivetrain
Tovaryš, Miroslav ; Beran, Martin (referee) ; Blaťák, Ondřej (advisor)
The diploma thesis deals with the design process of Formula SAE drivetrain. Different design possibilities were described and after that were the suitable designs chosen to be used in the team car. Then were the design parameters determined. The design of the differential gear mounting was created and it’s stress analysis was done.
|
|
|
Intake Manifold for Single-cylinder Engine
Pavličík, Lukáš ; Janoušek, Michal (referee) ; Svída, David (advisor)
The aim of this diploma thesis is to create a thermodynamic computational model of a single cylinder IC engine for the Formula SAE car. The single cylinder SI engine KTM 500 EXC is considered as a powertrain unit. The intake manifold of the serial enduro motorcycle is modified according to the Formula SAE 2014 rules. Analysis of the one dimensional flow is performed by using Lotus engine simulation software.
|
|
|
Vehicle Wheel Hubs Design
Mohyla, Daniel ; Janoušek, Michal (referee) ; Ramík, Pavel (advisor)
This diploma thesis deals with design of a wheel hub assembly for a Formula Student vehicle. First part of this thesis is dedicated as an introduction to the Formula Student competition and serves as a summary of design solutions for wheel hubs with a focus on open wheel vehicles. Second part deals with description of a problem and summarizes necessary knowledge and information to solve given problem. Third part is devoted to CAD modelling in software PTC Creo parametric. This model is then analysed using finite element method. Last part of this thesis is a discussion about achieved results and discussion about further potential improvements is carried out.
|
|
|
Wheel Hub Carrier for car of Formule SAE
Vymazal, Roman ; Ramík, Pavel (referee) ; Svída, David (advisor)
This thesis deals with a mechanical design of a front wheel hub carrier and a rear wheel hub carrier for Formula SAE. It contains the main design as well as the control of a screw and computer loading solve process. The essential objectives of this thesis are the optimization of the mechanical design and following manufacturing of desired parts and their practical usage in a Formula SAE race car.
|
|
|
Magnetorheological damper for Formula Student
Dlápal, Václav ; Strecker, Zbyněk (referee) ; Mazůrek, Ivan (advisor)
The master thesis deals with design, manufacturing and testing of a prototype magnetorheological damper developed for Formula Student vehicle. The aim was to design and test the damper with similar damping properties to the vehicle as a conventional damper has. Target force-velocity curves were set using quarter car model and evaluated comparing minimal contact force of a tyre for conventional and newly developed damper characteristics. Structural analysis of designed parts, hydraulic and static magnetic analysis were performed. Manufacturing of a specific part magnetorheological damper part was described – piston. Manufactured prototype damper characteristics were evaluated.
|
guest ::
