|
|
Communication Environment for Spectral Analyzer Control
Smělík, Martin ; Šebesta, Jiří (referee) ; Dřínovský, Jiří (advisor)
The aim of this master‘s thesis was design a new communication interface for spectral analyzer Seaward EMC Spectrum Receiver, which instead of the RS 232 interface is connected to a computer via the USB interface. This thesis contains both hardware and software solution based on the analysis and comprehensive understanding of communication between the spectrum analyzer and the computer. Further it contains the whole realization of communication interface and an example of measurement of the EMC problems too. Last part of this thesis was a realization of the automatic measurement via the development environment MATLAB and Agilent VEE, which was used for measurement of noise background.
|
|
|
Narroband PLC model
Sekot, Karel ; Krajsa, Ondřej (referee) ; Mišurec, Jiří (advisor)
This thesis is focused on data communication utilizing low-voltage power distribution lines (PLC). It describes interference in narrowband systems commonly used for remote data collecting, for example. Preamble deals with basic priciples of PLC (signal injecting) and describes the measuring workplace, its wiring and used tools. Following sections define different types and possible sources of interference, operation of the equipment in terms of EMC and other characteristics of the transmission path. The text also analyzes practical interference tests, identifies main parameters affecting data transmision and compares teoretical and practical conclusions.
|
|
|
Workplace for HF Radiated Immunity Testing
Slach, Petr ; Soldán, Josef (referee) ; Svačina, Jiří (advisor)
This thesis investigates into possibilities of a design of a workplace for device endurance experiments against strong high-frequency electromagnetic field. It deals with testing methods, describes advantages and disadvantages of such methods. It investigates possibiities of testing devices, possible magnitudes of fieldstrenght. One can find in the thesis a review of a way of testing using a high-intensity electromagnetic field. A concept of a construction of a stripline including a practical example is a part of the thesis.
|
|
|
Communication & Man-Machine Interface for industrial sensors
Marcoň, Petr ; Fedra, Zbyněk (referee) ; Frýza, Tomáš (advisor)
This thesis describes the possibilities of local and remote sensors configuration. Summary overview of the most common Fieldbus and protocols for remote configuration is performed. The focus is mainly dedicated to the HART protocol that is analyzed from the physical layer to the application layer. Circuit diagram and printed circuit board (PCB) of smart sensor with thermistor probe Pt1000 was designed. The HART protocol allows the smart sensor parameters setting as well. The functionality of remote configuration was tested in HARTWinConf program. The control elements for local sensor configuration, such as buttons, matrix keyboards and touchscreens, are described in the following chapter. Representation of the measurement values on display module is introduced too. The most important parameters and aspect of character LCD, graphics LCD and OLED displays are described in greater details. The DD12864YO-3A OLED display was selected to use with designed temperature smart sensor module. The display shows the loop current, the percentage of current range and the primary value - temperature. As the last step the EMI and EMS tests for all modules were performed.
|
|
|
Measurement of three-phase EMC filters
Tomašák, Lukáš ; Soldán, Josef (referee) ; Dřínovský, Jiří (advisor)
The aim of this semestral project was to propose the measuring system for measuring three-phase EMI filters in symmetrical, asymmetrical and non-symmetrical mode according to information from supplier of the filters. The major part of this project was focused on measuring the frequency dependence of the insertion loss of three-phase EMI filters in impedance systems 50?/50?, 0,1?/100 ? and 100?/0,1?. It was determined that results approximately agree with specifications in datasheets.
|
|
|
Neural networks for EMC modeling of small airplanes
Koudelka, Vlastimil ; Goňa,, Stanislav (referee) ; Raida, Zbyněk (advisor)
This thesis deals with neural modeling of electromagnetic field inside small aircrafts, witch can contain composite materials in their construction. Introduction to neural networks and its application in EMC of small airplanes is discussed in the first part of the text. In the second part of this thesis we design a simple EM model of small airplane. The airplane is simulated by two parallel dielectric layers (the left-hand side wall and the right hand side wall of the airplane). The layers are put into a rectangular metallic waveguide terminated by the absorber in order to simulate the illumination of the airplane by the external wave (both of the harmonic nature and pulse one). Numerical analyses are performed to search the relations between the distribution of an electromagnetic field inside the aircraft and electric parameters of model walls. The results of numerical analyses are used to train two types of neural network. In this way we can obtain accurate continuous model of electromagnetic field inside the aircraft. For the comparison with neural networks a multi-dimensional cubic spline interpolation is provided also. Neural classifiers are also investigated. We use them for classification of imaginary composite materials in terms of EMC. The nearest neighbour algorithm is applied as a classic approach to problem of classification.
|
|
|
Electromagnetic interference and pacemakers
Kulík, Jindřich ; Richter, Miloslav (referee) ; Havlíková, Marie (advisor)
This thesis deals with electromagnetic compatibility of implantable electro-medical devices using in cardiology. The main aim of this thesis is detection of the resistance of implantable pacemakers (PM) and implantable cardioverter defibrillators (ICD) to the electromagnetic interference. In the first part of this thesis, a function of the heart, which is necessary for understanding of PM and ICD operation, is described. The function and construction of PM and ICD is detailed in the theoretical part as well. The next part is focused on the electromagnetic compatibility. The next part is description of the measurement method and the experimental arrangement used for practical experiments with electromagnetic resistance of PM and ICD.
|
|
|
Impedance Transformers with Impedance Ratio 1/50 Ohms for Wide Frequency Range
Zachar, Jiří ; Šebesta, Jiří (referee) ; Dřínovský, Jiří (advisor)
One of the aims of this bachelor’s project was to explore possibilities of the design of impedance transformers for a very wide frequency bandwidth (10 Hz – 100 MHz) with the impedance ratio 1/50 . It is not possible to cover this wide frequency band by one transformer, so the design was split into the design of two impedance transformers. The first transformer was realized on the ferrite coil RIK20. The second transformer was realized by with the components T16-1 and TT25-1-kk+ produced by Mini-CircuitsŽ company, and transform impedance directly in a high frequency range. The performance of realized transformers was approved by measuring transformed impedance on their outputs. The frequency band of transformers was determined from these data. Their insertion loss was also measured. The last part of this work was focused on measuring the insertion loss of EMI filters. The main task was to compare the impedance systems 1 /100 and 0,1 /100 and vice versa. The insertion loss was measured for several chosen EMI filters. The insertion loss of all filters reached approximately the same values for both impedance systems.
|
|
|
DMS pilot implementation in banking environment
Žáček, Jan ; Šedivá, Zuzana (advisor) ; Pour, Jan (referee)
The diploma thesis focuses on the analysis of a document management system (DMS) pilot implementation in the environment of a Czech bank. The thesis is divided into three parts; the first part is theoretical and remaining two parts are practical (analytical). The theoretical part is devoted to summarization of basic theoretical knowledge in the field of DMS and in a pilot deployment of information systems. The second part describes the EMC xCP 2.1 platform and evaluates its advantages and disadvantages compared to competing products. The third part describes the technological implementation and deployment of a new DMS pilot solution in a bank. Further it analyzes and describes the follow-up activities and related projects that increase the DMS usability in a real business applications. The diploma thesis concurrently focuses on the business requirements analysis including constrains of a new solution deployment, as well as the DMS technological aspects description and the solution design. The author of this thesis has been working as an analyst in the IT company and has been in a long-term cooperation with the DMS team in the bank. The motivation for choosing this topic is to make a summary and clarification of knowledge gained on projects in the the bank and to take an advantage of it in the future cooperation.
|
|
| |
guest ::
