|
|
Digital commissioning of a robotic production system for 3D print
Beránek, Ondřej ; Štěpánek, Vojtěch (referee) ; Vetiška, Jan (advisor)
The master thesis describes the design and digital commissioning of a robotic production system for 3D concrete printing. The theoretical part of the thesis includes an analysis of the current state of knowledge in the field of 3D printing in industrial automation. It also includes a detailed system analysis of the problem, in which the requirements and elements of the production system are specified. In the applied part of the thesis, a 3D model of the workplace was created and a simulation of the entire production process and digital commissioning of the system were performed using the ABB RobotStudio software. The output of the of the application part of the thesis is the design is the design of the workplace with a debugged control program ready for use in real operation.
|
|
|
Design of a Robotic Cell for Laser Marking of Automotive Components
Pátek, Václav ; Kubela, Tomáš (referee) ; Pochylý, Aleš (advisor)
This diploma thesis is focused on the design of a robotic workstation for laser marking of aluminium hinges for the automotive industry. Robots remove wheel hinges from palettes at the end of a preassembly line, mark them a sort them. At first, selected marking technologies used in the automotive industry are introduced. Afterwards, a few robot and process simulation software are described. Subsequently, several layout variants are created as viable options for process handling and the chosen variant is designed in detail. Using RobotStudio software, a simulation of the robotic marking cell is made for process verification. Finally, a technical - economic evaluation is performed.
|
|
|
Digital commissioning of a robotic production system for palletizing
Kopec, Adam ; Kočiš, Petr (referee) ; Vetiška, Jan (advisor)
The bachelor's thesis deals with the digital commissioning of a robotic system for palletizing. The first part of the thesis presents theoretical knowledge. Digital commissioning was characterized, its principles and possibilities were presented, as well as automated palletizing with a focus on robotic palletizing and the use of grippers. In the second part of the thesis digital commissioning was created. An analysis of possible workplace layouts was created, then the selected workplace was assembled in the RobotStudio program, while some elements were modelled in the Inventor program. After defining the paths and logic, the system was commissioned.
|
|
| |
|
|
Digital commissioning of a robotic production system for parts assembly
Onderka, Tomáš ; Blecha, Radim (referee) ; Vetiška, Jan (advisor)
This bachelor's thesis deals with digital commissionig of a robotic production system for parts assembly. The issue of digital commissioning is described in the theoretical part of the thesis, followed by a safety of the workplace and description of used grippers. Parts assembly, large series and small series approaches are described in the practical part of the thesis. For digital commissioning was used ABB RobotStudio and small series workplace was commissioned.
|
|
|
Design of welding cell
Šuba, Marek ; Kočiš, Petr (referee) ; Vetiška, Jan (advisor)
The topic of this bachelor's thesis is the design of a robotic cell for spot resistence welding of sheet metal parts. The base of this thesis will be the research of industrial robots, spot welding guns, welding fixtures, robot grippers, sensors and safety precautions used in such robotic cells. Second part of the thesis contains few concepts regarding the robotic cell itself and the choice of the best one for the situation at hand. Third part of the thesis contains the choice of welding guns, construction of the welding fixtures and possibly even robot grippers for the given metal sheet parts. In the last part of the thesis comes the simulation of the welding process in RobotStudio (software from ABB), check whether the robotic cell meets the requested production time needed and a final assessment of the results.
|
|
|
Digital commissioning of a robotic production system for sandblasting technologies
Dvořák, Vít ; Szabari, Mikuláš (referee) ; Vetiška, Jan (advisor)
This bachelor thesis deals with the digital commissioning of a robotic production system for blasting aluminum castings. The introductory theoretical part discusses the technology of digital commissioning and blasting technology. The practical part is divided into several parts. In the first part, a system analysis is created, which sets out the conditions that the system should meet. The following is a conceptual design of a robotic cell, selection of individual system devices and determination of technological parameters. In the third part, a technological jig is designed, which is used to set up the blasted part inside the cabin. The last part deals with the creation of the robot path and the creation of the basic logic of the production system in the ABB RobotStudio program.
|
|
|
Digital commissioning of a robotic production system for laser cutting
Žaludek, Jan ; Kočiš, Petr (referee) ; Vetiška, Jan (advisor)
This diploma thesis deals with digital commissioning of a robotic production system for laser cutting. First part of this thesis sums up teoretical knowledge of virtual commissioning, fundamentals of laser and laser cutting and system analysis of such a workplace. In practical part of this thesis, the workplace was designed including the workpiece clamping. The design and the digital commissioning itself was mediated by the software RobotStudio. In the programming language RAPID a control program was made and tuned. The workoplace was then virtually commissioned. For easier handling a user interface on FlexPendant was made.
|
|
|
ABB RobotStudio - examples in C#
Mittaš, Tomáš ; Roupec, Jan (referee) ; Lang, Stanislav (advisor)
This bachelor thesis is concerned about programming movements of a robot developed by company ABB in a programming language C#. The aim of thesis is to show unconventional ways of using C# programming language. In the introduction are briefly described the instruments for programming and robot simulation. Following chapters are devoted to history of robots, their categories, sensors and programming and also to introduction of company ABB and their products, which are used in this thesis. In the conclusion is comparison and analysis of both used environments. Thesis also contains instructions for making an application and simulation and also a demonstration video of functional demo project in simulation and on real robot.
|
|
|
Digital commissioning of the pallet stacker
Karn, Pavel ; Bražina, Jakub (referee) ; Vetiška, Jan (advisor)
This bachelor's thesis deals with the virtual commissioning of the pallet stacker. For this work LUX spol. s r.o. has provided a 3D model of this single-purpose machine. The theoretical part of the thesis revolves around the description of the virtual commissioning issue. The practical part of the thesis first describes entire work cycle, and then designs and evaluates two variants of the control systém. The selected variant was then put into virtual commissioning in the ABB Robotstudio software.
|
guest ::
