|
|
Nursing home Ivančice
Blümelová, Adéla ; Kalánek,, Jiří (referee) ; Ostrý, Milan (advisor)
The aim of the thesis is to design and develop project documentation for the new construction of a retirement home. The old age home is located on a piece of land in Ivančice. The building has been designed as a stand-alone building and is divided into two parts SO 01 and SO 02. Part SO 01 has three above-ground floors and a connecting corridor that has four above-ground floors belonging to it. This whole part has a basement. The operation of the laundry and kitchen is located in the basement, which also includes cleaning facilities, a garage, workshop, mortuary and technical facilities. In the first above-ground floor there is a dining room, doctor's office, offices, a cafe and a hairdresser. Rooms are located on the second and third floors. This section is tailored for clients with Alzheimer's disease and senile dementia. There are seven double rooms on each floor. Part So 02 has four above-ground floors without a basement. There are eight double rooms on each floor. Implementation documentation has been processed for only object So 01. The retirement home is based on reinforced concrete footings and belts. The structural system consists of reinforced concrete columns. The perimeter walls in the basement are reinforced concrete. On the above-ground floors, the outer shell is made of infill masonry of ceramic blocks of the THERM type. A reinforced concrete slab is designed as the ceiling structure. The staircase is one piece also made from reinforced concrete. The balcony slabs are prefabricated. The roof is flat. The building envelope is insulated with the ETICS contact insulation system.
|
|
|
Children's Home
Chrbolková, Erika ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The thesis focuces on project documentation for a construction project with the aim to design home for children under institutional care. Located on the outskirts of Skuteč, the building is three-storey, detached and partially basemented. The basement area lays on the slab foundations and the first floor on strip foundations. Vertical structures are made of ceramic blocks and local reinforced concrete columns while horizontal structures are made of reinforced concrete slabs and wooden trusses over the gym. The building is covered by a vegetated flat roof. The building houses six residential units for six family groups with a total capacity of 43 children. The basement includes gym and fitness with technical facilities. The first floor consists of three residential units, changing rooms for the gym and kitchen with facilities. The second floor houses remaining three residential units, offices and the refectory. The upper floor is used for children´s education and entertainment.
|
|
|
Car showroom with service
Pavlíček, Jiří ; Nespěšný, Ondřej (referee) ; Pěnčík, Jan (advisor)
The subject of this master thesis is the elaboration of project documentation for the construction of a car showroom & service. This building is located in Brno, cadastral area of city Brno: Královo Pole. It is a detached building without a basement built on a trapezoid shaped area with a flat terrain. Object is divided into two functional parts: the car showroom and the car service. These two parts are constructionally and operationally connected. The car showroom is designed as a two-storey object, which serves as car exhibition, technical and hygienic facilities and mainly the administrative parts of both objects. The car service is designed as a single-storey object without a basement, which serves as a workspace of the car service and a warehouse. The load-bearing structural system of the car showroom is made of reinforced concrete pillars with ceramic masonry. The load-bearing structural system of the car service is made of reinforced concrete pillars with light sandwich panels. The foundation slab consists of prefabricated stepped foundation pad, prefabricated reinforced concrete grade beam and concrete strip footing. Insulation system of the building is made of insulation boards from basalt wool cladding by ventilated facades with perforated steel panels. Insolation in the car showroom is secured by glass curtain wall in combination with plastic windows and doors. Ceiling structures are designed as prestressed ceiling panels Spiroll. Roofing structure of both objects is supported by prestressed reinforced concrete roof girder in combination with trapezoidal sheet and insulation boards from basalt wool and PIR boards. The roof of the objects is flat with ordinary layer order with waterproof layer from softened PVC.
|
|
|
Multifunctional house in Uherské Hradiště
Kopecká, Lucie ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
The object of this master’s thesis is a newly-built mixed-use building in the town of Uherské Hradiště. It includes parking and office spaces, retail shops, and a coffee shop. The building is situated in a mildly sloping terrain near the town centre. It is a three-storey detached building with partial basement. The floor plan was created by joining several different-sized rectangles together. The mixed-use building is based on foundation pads and slabs. It is roofed with a warm flat roof and, above the first floor, with a green roof. The building consists of a cast-in-place reinforced concrete frame with columns and beams. The floor structure is composed of prestressed hollow core slabs. The external wall of the above-ground floors is made of hollow clay blocks and the basement external wall is made of permanent formwork. The wall of the lift shaft is built from reinforced concrete and the staircase is composed of precast reinforced concrete slabs. The external walls are insulated with contact thermal insulation system and in some parts there is timber cladding – ventilated façade with thermal insulation from glass wool. The thermal insulation of the basement and of the plinth is made of extruded polystyrene. The object is divided into several functional zones. On the ground floor there is a coffee shop, a copy shop, a stationery shop, and a bakery. On the first and second floors there are office spaces. In the basement there are technical facilities only. The main entrance of the object is from the northwest part of the plot. There the entrance to the car park is also located, situated to the northwest and southwest side of the plot. Bicycle stands and a place for recycling is also located there. Around the object there is a pavement from which there is wheelchair access to all of the functional zones.
|
|
|
Technological phase of the upper structure of the apartment building in Otrokovice
Králíček, Jiří ; Vlčková, Jitka Laura (referee) ; Venkrbec, Václav (advisor)
The bachelor thesis deals with the description of the technological process in the execution of the gross overhead construction of a multifunctional apartment building in Otrokovice. These are the brickwork of load bearing and non-load-bearing vertical structures, the execution of reinforced concrete translations, columns, translations and ceilings. The content of the thesis is a technical report focusing on the given technological phase, solution of the transport routes, technological regulation for the given stage, technical report of the construction site including the situation, design of the machine assembly, safety of the solved technological phase, control and test plan, report statement, budget, schedule a comparison of the hydraulic manipulator and self-construction crane.
|
|
|
Sports Centre
Sauer, Vít ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The content of the master´s thesis is new building sports hall of ball sports. This building has contains no cellar and three above-ground floors. In ground floor, there are playing area, changing rooms, relevant functional facilities including utility rooms. The first floor is completely reserved for spectators, there are tribune for sitting spectators, gallery for standing spectators, hygienic rooms and buffet for spectators. In the third floor, there are rooms for VIP spectators, briefing room, head office of sports hall including conference room, spaces for TV transmission, hygienic rooms and utility room. Object is based on concrete foundation pads and strips foundation. Structural system of the object is combination of column system from cast-inplace reinforced concrete and wall system from brickwork. Floor structures over above the first and second floor are designed as castin- place reinforced concrete, floor structure above the third floor is folded from wood beams. Loadbearing structure of roof is system of glue laminated timber girders, roof cladding is mechanically anchored.
|
|
| |
guest ::
