|
|
Application of the multi-axis milling of a shaped part
Klíma, Jiří ; Sedlák, Josef (referee) ; Píška, Miroslav (advisor)
This diploma thesis focuses on the design and production technology of making pattern and core box by milling. The theoretical part summarizes the issue of production models, CAD / CAM technology and milling technology. The practical part is elaborates engineering design of machined parts focused on the specific requirements for application in the foundry. For designing of milling technology was used CAM system. This milling technology was programmed and optimized. Parts are finally produced on 3-axis milling machine. In the end there is technical-economic evaluation of production and discussion of results.
|
|
|
Deep drilling of an aeronautical part
Klíma, Jan ; Humár, Anton (referee) ; Píška, Miroslav (advisor)
Diploma thesis deals with problems about deep drilling of aeronautical part made of aluminum alloy EN AW 7075 T7351. This work is focused on the material properties component and current aluminum alloys processing. Further it contains a part delicated to various kinds of technologies of deep drilling, primarily is focused to gun drilling. Describes a tool, technology and conditions in gun drilling of deep holes with focused to analysis of the forces. Then it compares contemporary manufacturing technology of part drilling in cooperation and proposes an innovative technology of manufacturing. This project is accomplished with technical-economical evaluation.
|
|
|
Computational modelling of function of human vocal folds
Klíma, Jaromír ; Vašek, Martin (referee) ; Švancara, Pavel (advisor)
Master thesis deals with creating of the numerical model of the human vocal folds. Calculation algorithm is designed to include vocal chordsinteraction with the air flow. Analysis of the results achieved by the numerical simulations and calculations are focused on the pressure and velocity conditions in the areas under vocal folds, between vocal folds and above vocal folds. Movement and stress analysis of individual layers of vocal folds has been made. This analysis is limited only for physiological health vocal folds without pathology and disease. Modal analysis of structural and acoustic environment, backround research of vocal folds function and summary of some published overviews of numerical models is part of this work.
|
|
|
Binocular vision and anaglyph production
Klíma, Jindřich ; Jehlička, Karel (referee) ; Fedra, Petr (advisor)
The aim of my semester work was to study the physiology of binocular vision for spatial perception of two-dimensional images using glasses with coloured filters, anaglyphs. Since the theme concerns the visual sense, I explained the principle of the vision first. Then I described the principle of physiological development of the vision and the assumptions about binocular vision. The binocular vision is a complex process ongoing in the brain. Therefore, another topic of my thesis was an analysis of three-dimensional objects, space analysis, which unknowingly takes place in our brain. The next chapter deals with stereoscopy, technology which evokes a feeling of depth in two-dimensional images. One of the techniques is obtaining spatial perception by means of glasses with colour filters. In my thesis, I summarized the knowledge about the principle of anaglyphs and I described the principle of obtaining anaglyphs, from shooting the scene, over its creation to its viewing. Finally, here is an example of the program created in Matlab. It is a simple program to obtain anaglyphs from two separate frames.
|
|
| |
|
|
Analysis of high-speed induction motor
Klíma, Jiří ; Ondrůšek, Čestmír (referee) ; Vítek, Ondřej (advisor)
This thesis deals with the problem of the high-speed induction machines. In the introduction the design of the machines and problem areas are discussed. The feeding from the frequency converter and the mechanical strength of the rotor appear to be the biggest problem. High-speed engines with solid rotors were designed. The first model is equipped with a conductive cooper layer on the surface. This model is exposed to harmonic and non-harmonic input voltage and then the results of the simulations are compared. The following model of the thesis is equipped with axial slots. In the practical part of the thesis no load measurement is taken. One point was measured at nominal frequency. At the end of the thesis the results of the measurements are compared with the results of the figures extracted from Maxwell software.
|
|
|
Analysis of High Speed Squirrel Cage Induction Motor With Influence of Riveting
Klíma, J.
This paper deals with analyzing of high speed squirrel cage induction motor and the influence of riveting stator stack. The model of high speed induction motor was made in ANSYS Maxwell software in accordance with provided design documentation. Test bench was used to experimentally verify the results. The difference between measurement and simulation are explored. Distribution of the losses and its individual portion are discussed at the end. Stator sheets are riveted and influence of rivets will be subject of the interest.
|
|
|
Wireless communication modules for microcontrollers
Klíma, Jan ; Matěj, Zdeněk (referee) ; Fedra, Zbyněk (advisor)
The aim of this master’s thesis is analysis of wireless communication between mikroprocesors. The first part of the work are analysed the problems the wireless free ISM band. Mainly RFM12B and ZigBee module, which i these band work and ZigBee standart. The second part are described relazation board for both module. Further how programming ZigBee module. And at last programs for tested module.
|
|
|
Simulation of the DVB-S2 Transmission
Klíma, Jindřich ; Fliegel, Karel (referee) ; Kaller, Ondřej (advisor)
This thesis is focusing on the second satellite digital TV standard, DVB-S2. It deals with the principle of the digital TV and the first standard DVB-S. It also describes the very beginning and characteristics of the DVB-S2, new technologies in use, architecture and the individual topics are then explained more in detail. The thesis also contains the program of transmission simulation of DVB-S2 in MATLAB. In the laboratory of television technology UREL, two standards were measured and compared with the values obtained from the program. The functionality of the program and the benefits of DVB-S2 were verified afterwards.
|
|
|
Search in field of core shooter machines
Klíma, Jiří ; Pavlík, Jan (referee) ; Bradáč, František (advisor)
This thesis deals with construction and technology of core shooter machines. Thesis contains basic characteristics of machines and overview of world manufacturers. The machines are compared in terms of arrangement and used equipment. For completeness, there is focus on single core production technology, preparation of raw materials and manufacturing automation. In conclusion there is assessment of the current situation and view on future developments in this area.
|
guest ::
RSS feed.