|
|
Technologies of reuse of wastewater in place of need
Podhrázský, Martin ; Ševčík, Jan (referee) ; Hlavínek, Petr (advisor)
Final thesis is focusing on possibilities hidden in the potential of wastewaters in sewers. The goal of this thesis is to present technologies and experiences with water reclamation and with heat recovery systems using wastewaters as a source of heat energy. The theoretical part is divided in two main topics. The first topic is focused on bringing important knowledge and experiences with designing and operating decentralized sewer mining systems, which are, due to less favourable environmental conditions, largely applicated and developed in countries such as Australia, California, etc. The second topic is focusing on heat recovery from sewage water and possibilities of heating and cooling buildings. A possibility of using heat energy from sewage for heating and cooling a swimming pool building located in Brno, Czech Republic was assessed in the last part of this thesis. As a source of wastewater was considered a sewer main located near the pool building. Payback periods and economical effectivity of investing into wastewater heat recovery system was compared with centralized heat supply system, which is a very common source of heat energy in Czech Republic.
|
|
|
Suspensions of passenger and race cars
Ševčík, Jan ; Zháňal, Lubor (referee) ; Porteš, Petr (advisor)
Bachelor thesis focuses on comparing different types of axles between them with emphasis on changing the geometry during propružení.In student version of Autodesk Inventor Professional was created virtual models of axles and virtual test polygon. The output of the program are a series of images showing the axle during springing. Changes in geometry are quoted, described and analyzed. In conclusion there are compared to civil rights and race suspension.
|
|
|
Study population of bacteria by image analysis methods
Ševčík, Jan ; Veselá, Mária (referee) ; Zmeškal, Oldřich (advisor)
This bachelor thesis is focused on monitoring and application of image analysis methods on Bacillus megaterium and Cupriavidus necator bacteria. The introduction describes a general knowledge about bacteria, microscopic and image analysis methods. At first it was necessary to prepare suitable microscopic specimens using Gram staining for the observation of a bacteria cell. Every picture of bacteria was taken using a CCD camera and a microscope. Box–Counting method was used to identify the optimal threshold value, corresponding to their fractal measure (or surface areas covered with bacteria) and fractal dimension (or entropy of their arrangement on the surface area). After thresholding, the images were further processed using the Mass–Radius method, which defines a distribution of bacteria relative to the centroid of a cluster.
|
|
|
Design and manufacture of bending fixture
Ševčík, Jan ; Trčka, Tomáš (referee) ; Zemčík, Oskar (advisor)
The work deals with the design and manufacture of bending fixture. It contains a comparsion with current bending fixtures on the market and a justification for the production of a given type. Then the work contains a proposal of the constuction of individual parts with the selection and description of technologies of their production and the process of their production. The work also contains complete drawing ducumentation of all parts of the bending fixture. The conclusion of the work contains the possibilities of design modifications and economic and technological evaluation.
|
|
|
Study of mechanism and kinetics of hexa-1,5-diene polymerisation catalyzed by phenoxy-imine titanium complex and MAO
Ševčík, Jan ; Cihlář, Jaroslav (referee) ; Hermanová, Soňa (advisor)
This diploma thesis is focused on study of polymerization of hexa-1,5-diene catalyzed by phenoxy-imine titanium dichloride (FI Ti) and methylaluminoxane (MAO) as cocatalyst. Effect of monomer concentration, polymerization temperature and cocatalyst/catalyst ratio on catalytic activity, molecular weights, polydispersities and particularly microstructure of prepared poly(hexa-1,5-diene) was studied. 1H NMR spectroscopy revealed that the poly(hexa-1,5-diene) microstructure contained methylene-1,3-cyclopentane (MCP) as well as vinyl tetramethylene (VTM) units. Kinetics of this polymerization was studied. Finally, copolymer of ethene and hexa-1,5-diene possessing incorporated pendant vinyl group was prepared.
|
|
|
Accounting Directives for Company
Machačová, Hana ; Ševčík, Jan (referee) ; Pěta, Jan (advisor)
The bachelor thesis is focused on internal guidelines of the company ITAB Shop Concept CZ, a.s. The first part is devoted on theoretical background of internal directives, accounting and inventory valuation and legislative bases governing the formal and concept aspects of these documents.. The second part contains a company introduction and evaluation of the existing guidelines. The last part contains draft of internal guideline dealing with comprehensive inventory valuation and accounting of stocks.
|
|
|
Back to the Future: Developing an On-Board System for a Vintage Motorcycle
Sevcik, Jan ; Juran, Radovan
This paper describes complex design of a prototypeof an on-board system for older motorcycle for measuring itsoperational characteristics. The birth of the idea is described,followed by explanation of characteristics measured by thesystem, principles of their measurement, and processing the datafor visualization on a display. The system is designed with theaim of the most minimal intervention into the construction ofthe motorcycle, but being easy to reproduce and durable enoughfor a real deployment and use while riding the motorcycle.
|
|
|
Design of the on-board system for a motorcycle
Ševčík, Jan ; Benešl, Lukáš (referee) ; Juráň, Radovan (advisor)
This work deals with the design and construction of an on-board computer for a vintage Jawa motorcycle. The design combines measuring sensors of our own design and those commonly available on the market, a main control board of our own design and assembly without interfering with the structure of the motorcycle. The system is considered for mounting on the Jawa 250/592 motorcycle, with some parts from other motorcycles, allowing for easier fitting. ESP32 from Espresiff is used as a microcontroller, which is placed in the tank of the motorcycle and displays the measured data on the LCD display. The system also allows you to control the entire motorcycle, such as enabling starting or turning on the lights
|
|
|
Optimization of concentration determination of degrdation products of uracil via LC-MS
Kavale, Gustav ; Ševčík, Jan (advisor) ; Míšek, Jiří (referee)
In the Czech Republic, tens of thousands of oncology patients undergo treatment based on fluoropyrimidines every year. Many of these patients suffer from negative side effects that can even have a fatal impact. Currently, the best described factor in the cause of the toxicity of fluoropyrimidines is the activity of the pyrimidine catabolism enzyme - dihydropyrimidine dehydrogenase. Due to the high frequency of pathogenic mutations in the dihydropyrimidine dehydrogenase gene, the extreme risk of toxicity affects hundreds of patients in the Czech Republic every year. For this reason, the "European Medical Agency" has issued a recommendation to carry out investigations for the possible occurrence of toxic effects before starting treatment. One of the diagnostic options for determining sensitivity to fluorouracil is metabolomic analysis, based on the quantification of degradation products of uracil metabolism in plasma using liquid chromatography with mass spectrometry. The goal of this work is to perform basic optimization of mass spectrometer parameters for quantification of selected degradation products of uracil metabolism. Keywords: Uracil, Fluoruracil, Liquid Chromatography, Mass Spectrometry
|
|
| |
guest ::
RSS feed.