|
| |
|
|
Static analysis of moving skyscraper
Jedlička, Michal ; Martinásek, Josef (referee) ; Vlk, Zbyněk (advisor)
The thesis is about static analysis of moving skyscraper (inspired by The Dynamic Tower). There is a rotation of each particular floor around its axis independently on each other. In this thesis, moving skyscraper is solved as a whole piece with specialization in the moving floors and their mounting on the core of the building.
|
|
|
Apartment building in Trutnov construction technology project
Schreiber, Jiří ; Novotný, Michal (referee) ; Venkrbec, Václav (advisor)
In my master´s thesis I am talking about solution of building a top rough construction technology in a block of flats. The content of my thesis are mainly worked out technical regulations concerning monolithic ceiling constructions and vertical load bearing constructions. Regarding the phase of the top rough construction, also there are a proposition of a building site organization, a technical report about the building site organization, a technical report about a building-technological project, solution of construction orgaization, a timetable, an item budget and a proposition of machine compositions.
|
|
|
Reinforced concrete structure
Tesař, David ; Kraut, Jan (referee) ; Šulák, Pavel (advisor)
The aim of the master‘s thesis is static and structural design of polyfunctional house. The load will be determined according to ČSN EN 1990. The finite element method will be used for the calculation of internal forces. The design will be dimensioned according to ČSN EN 1992. Text part, static calculation and shape and reinforcement drawings will form the output of this work.
|
|
|
D1 Reconstruction of Bridge on Motorway D1-212 in Ostrovačice, Preparation and Realization of Structure
Kratochvíl, Tomáš ; Kratochvílová, Erika (referee) ; Šlanhof, Jiří (advisor)
The diploma thesis deals with preparation and realization of D1 reconstruction of D1-212 bridge in Ostrovačice. It is a motorway bridge that transfers traffic over road II / 386. The reconstruction will demolish the superstructure of bridge with bridge equipment and parts of the abutments and their new construction. The preparation of the project solves the engineering report, the block plan drawing, the financial and time schedule - by objects, the budget SO 201, the study of the implementation of the main construction technologys, the project of the site equipment, the design of the main building machines, the SO 201 time schedule, a desigh of the bill of quantities for structure, technical note for superstructure of a bridge and control and test plans. Part of the preparation of the building is the processing of the emergency plan.
|
|
|
Building survey and evaluating the state of construction
Štěpánek, Jakub ; Komárková, Tereza (referee) ; Heřmánková, Věra (advisor)
This diploma thesis is focused on building survey and evaluating the state of existing constructions. Process of evaluating the state of existing constructions and selected diagnostic methods are described in the theoretical part. The practical part is dealing with performed structural and technical survey of two industrial structures including evaluation of the strength of concrete and verification of the reinforcement. The final part includes assessment of both of the evaluated structures.
|
|
|
Multifunctional Pavilion
Dvouletý, Martin ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
The subject of the diploma thesi is the design and assessment of the pavilions supporting structure for exhibition and other purposes. The building is located close to Zlin. Preliminary designs of supporting structure were created. One of these was selected and detaileddesigned and assessed. Generallythere are two structures that are extended between themselves. A design and assessment of the entrance portal for the exhibition pavilion was created. The entrance portal is an atypical structure that was created from a combination of hyperboloid and cylinder. The entire portal is formed of welded parts and it is completely from glass. The entrance portal has a variable height, where the highest point is 8,258m. The entrance portal is 20,394m long and has a variable width, where the largest width is 12,000m. The exhibition hall, which is located behind the entrance portal was designed from flat arched truss trusses. The arched trusses are made of several radii and hasa overall impression of an elliptical truss. The trusses have a range 37,000m and they are axially distant 6,000m. The height of the arched trusses is 10.530m. In the leading position of the construction were designed pillars and construction for possible connection of the entrance portal, or for the location of the gate system. Whole construction of the exhibition pavilion, without the entry portal, is 54,000m long and 37,000m wide. The built-up area of both structures is approximately 2200m2. Construction are designed according to normative requirements of CSN EN for limit state of load capacity and usability. The main material of the supporting structural parts was used S355JR steel.
|
|
|
Konstrukce a architektonický prostor
Kuda, Daniel
The architectural work is the synthesis of three fundamental determinants: space, form, and matter that interact with one another. The current modern architecture is based on the design of space, where the design is based on different rules than the structural ones. In the space-matter-form relationship, the resulting space should be greatly influenced by the choice of material (matter) and consequently of the structural system (form). For the analysis of internal architectural space, I chose buildings that were structurally new at the time of their creation. These buildings use only one main material to create space, from which the construction system comes out. The results of the analysis show the importance of the spatial aspect of the structural system and indicate the natural design of each material.
|
|
|
Multiplication of shape as a means of constructing reality
Málková, Helena ; Magidová, Markéta (advisor) ; Čech, Viktor (referee)
Málková, H.: Multiplication of shape as a means of constructing reality. [Diplom thesis] Prague 2017 - Charles University, Faculty of Education, Department of Art Education, 123 pages. The diploma thesis focuses on the theme of creation of systems, structures and constructions in visual reality. The theoretical part is aimed at the possibilities of multiplication, its growth into space or a plane, while regarding creation of plastic arts by selected artists from the field of fine arts. The practical part introduces author's conception of the topic by the means of photographic medium. Structure is a crucial phenomena in possible understanding of visual reality. It has prerequisites for development of transcendental thinking. We can discover it throughout the whole universe as its unifying element. The findings from the theoretical part are used as basis for didactic activities. The didactic part presents the realized art assignments, which are a part of the implementation of the research. The thesis brings findings and conclusions within the framework of the results of creation and teaching of the topic of spatial composition of multiplied form within a coherent object. KEY WORDS: construction, structure, movement, shape, space, material variability, racionality, photography, object creation,...
|
|
|
Modern Maintenance Procedures for Airframe Inspections for General Aviation Category Aircraft
Koštial, Rostislav ; Petrásek, Miloslav (referee) ; Třetina, Karel (referee) ; Hlinka, Jiří (advisor)
Aircraft scheduled maintenance requirements are rapidly extending and developing due to rapid evolution of small aircraft. This evolution leads to implementation of until recently exclusively airliner class maintenance standards. In the field of general aviation and FAR 23/ EASA CS-23 especially, preventive maintenance based on part replacing or repairing is still dominant. DAMAGE TOLERANCE philosophy implementation into an aircraft design influences maintenance procedures, which are adjusted to older SAFE LIFE philosophy. Aircraft manufactures are developing new ways, how to integrate requirements of damage tolerance application into scheduled maintenance procedures. Huge airliner manufactures (FAR 25/ CS-25) are using the ATA MSG-3 intelligent maintenance approach based on inspection. This dissertation thesis develops intelligent scheduled maintenance methodology, utilizing ATA MSG-3 procedures, expert knowledge and Multiple Criteria Decision Analysis (MCDA).
|
guest ::
