|
|
Optimalization of the water heating system
Lebeda, Ladislav ; Franek, Lešek (referee) ; Macho, Tomáš (advisor)
This thesis is aimed to enable energy optimization of combined water heating system. The first part deals with the assessment of the general view of thermal solar systems with autonomic power from photovoltaics and description of a particular solar system for energy optimization. Then there is chosen the control system conception based on single-board computer Raspberry Pi, which is complemented by auxiliary measuring and controlling circuit. In the following chapters is described design and implementation of software for control system including web interface. The remote monitoring and controlling of solar heating system is the main purpose of web interface.
|
|
|
Design of heating of the building
Dittrichová, Zuzana ; Horák, Petr (referee) ; Maurerová, Lenka (advisor)
The aim of this diploma thesis is to find a solution of heating system, a hot water preparation and a subsequent design of the heat source for the apartment building. The project consists of a calculation of heat losses, a design of radiators, a dimensioning of pipes and a design of two options of the heat source for heating and hot water preparation. The first option of the heat source I chose a pellet boiler and the second option is an electric boiler with solar collectors for the preparation of hot water. The introductory part deals with analysis of this object and emission limits of heat source using different fuels.
|
|
|
Low potential heat for electrical power generation
Dobiáš, Jiří ; Radil, Lukáš (referee) ; Bartošík, Tomáš (advisor)
This bachelor’s thesis deals with low potential heat sources for electrical power generation. It mentions primarily low potential heat sources, their distribution by origin and where you can find such resources. Another part deals with the technology that uses low potential heat to heat production of higher temperature level and power generation. These are discussed here with a heat pump, regenerative heating, Stirling engine, solar collectors, Peltier cells, etc. In addition is to their use in practice. The last chapter deals with the replacement of the heater in the regeneration heating coil from the solar collectors. It is thus the use of renewable energy sources. Carry out technical and economic calculations for the real utility of such a plan.
|
|
|
Versatile Control Unit of Solar Collectors
Tříska, Vít ; Růžička, Richard (referee) ; Šimek, Václav (advisor)
This thesis deals with design and implementation of a versatile control unit, which is primarily designed for control of solar collectors. It describes the various stages of design. First, the system of solar collectors is introduced. Its input-output parts are analyzed and the requirements are determined for the control unit. The characteristics of temperature sensors are examined, the work deals with continuous variable speed circulators. The following part is dedicated to hardware and software implementation of the objectives of the work. The boards were designed in Eagle design environment, the firmware was written in C programming language. In conclusion, the evaluation of the results of the proposed system and possible ways of its further development are discussed. The versatile control unit can be deployed in practice realistically.
|
|
|
Design of system control and diagnostics water heating using solar energy
Kužel, Kristián ; Zuth, Daniel (referee) ; Vdoleček, František (advisor)
This thesis deals with problems related to heating of hot service water. It focuses on solar water heating, describes individual types of solar panels and summarizes the existing information about solar water heating. It demonstrates actual problems of solar system solution on a specific example of a two-generation family house, where it analyses possibilities of diagnostics and control of such system. It also deals with suggestions of possible expansion of the current solar system.
|
|
| |
|
|
Energy simulation of solar collectors operation in a low-energy family house with warm-air heating
Pech, Ondřej ; Charvát, Pavel (referee) ; Jaroš, Michal (advisor)
The thesis deals with energy simulation of a solar energy system in a low-energy family house with warm-air heating. The simulations performed resulted in the assessment of the energy contribution of four solar systems with different types of collectors. The profitability and return of investment for the particular system have been evaluated based on investment costs and the savings gained. The theoretical part includes an introduction to the solar energy field, solar panel systems and the passive house concept. The practical part is devoted to description of the simulated object models as used in the TRNSYS environment, the simulation results evaluation along with the assessment of the economic return on investment. The conclusion recommendations regarding a suitable type and size of the solar panel with respect to the economic criteria chosen are given.
|
|
|
Design of flowrate control of solar system
Popov, Petr ; Grepl, Robert (referee) ; Vlach, Radek (advisor)
Problems of heating of supply water by solar energy are described in this paper. In term of these works was designed and realized attenuate prototype of solar system. There was realized measurements of the temperatures on this prototype and on the basis of these measurements was identified system parameters. Creation of compute simulation of solar system was the further step of this paper. The compute simulation was verified on the basis of comparing of final temperatures with experimental prototype. The design of control algorithm of flow of liquid through the solar system to reach the maximum effect of system is programme of this paper. Simulations of control algorithms are make in environment of MATLAB SIMULINK.
|
|
|
Air-collector in heat balance of building
Dosedlová, Anna ; Počinková, Marcela (referee) ; Rubinová, Olga (advisor)
The subject of the thesis is the use of solar thermal technology for the production of low-potential heat. The theoretical part is focus in the solar technology, variants of passive use of solar energy. Describes in detail the solar facades, it's classification in terms of basic criteria. Applications on the project forced ventilation in administrative buildings, installation of solar facade. The work also includes an experiment that deals with the thermal behavior of the air collector.
|
|
|
Application of renewable energy sources in civil construction
Sedlák, Tomáš ; Počinková, Marcela (referee) ; Horák, Petr (advisor)
The aim of this Diploma thesis is the design of solar collectors. The thesis is consists from three parts. The first part describes the technical design of solar collectors and solar systems. The second part contains with design size of the collector area for the two selected variants. The third part addresses the experimental measurements located on the real building. The output of third part is the economic evaluation of the solar system.
|
guest ::
