|
|
Stteel Structure of Auto Showroom
Sztulová, Petra ; Štrba, Michal (referee) ; Hron, Lukáš (advisor)
Bachelor's thesis solves the design and assessment of the load bering structure of car showroom. The building is a single-storey, rectangular shape with dimensions of 15 x 30 m and a height of 7 m. Structure is formed by the roof cladding, purlins, rafters, columns and perimeter walls of glass.
|
|
|
Car show room in Olomouc
Mudrák, Štěpán ; Barnat, Jan (referee) ; Šmak, Milan (advisor)
The subject of this diploma thesis is structural design of a car showroom building in Olomouc. The layout dimensions are 16 x 37 m, the roof is designed as a 5° slope half span roof with cantilever hanging of 6 m. Roof layout dimensions are therefore 22 x 37 m. The object is designed as a two – storey building with two levels of second floor. Maximum height of the structure is about 9,0 m. The design is based on a study of two materiál variants – timber and steel structure. More suitable variant was chosen and following drawings, structural design report and technical report were processed. Main structural system is designed as a one rigid corner column – girder connection, 6 m axis dimensions. Main structural material is a glued laminated timber, completed with coniferous timber and steel elements. The roofing is supported by rafters which are connected to the main roof truss. Bearing element of floors is a Novatop Element structural systém. The spatial rigidity of structure is ensured by steel stiffeners. Structural analysis was carried out by finite element method in software Scia Engineer 21, where the design of the basic elements for ultimate limit state and serviceability limit state was made. Connection design was processed manuály and with software Idea Statica and Hilti Engineering Suite.
|
|
|
AUTOCENTRUM VW GROUP MIKULOV
Šešulková, Jana ; Hudeček, Vladimír (referee) ; Dýr, Petr (advisor) ; Kacálek, Petr (advisor)
The aim of this bachelor's thesis was to design a new car center of the Volswagen group. The project is based on an architectural study, which was prepared within the subject AG033 – Architecture design studio on the topic of Autocentrum VW Group Mikulov in the 2nd year of bachelor's study. The plot is located in the cadastral territory of Mikulov in Moravia, Břeclav district, It is located in the industrial part of the city, the surrounding buildings are made up of industrial buildings, especially storages and productions. There is also a scrap metal purchase and warehouse. The plot is currently registered as an area intended for construction by production. The plot is located on flat terrain. The proposed object responds to the required functions. It is oriented perpendicular to Jiráskova Street, the main entrances are oriented to the main street towards the built-up part of the city. The building is located longitudinally on the plot and corresponds to its shape. It consists of three objects that are interconnected. Individual objects have their own function. The first building is adapted and designed mainly for sales and car show purposes. This is the most dominant building. It is followed by a significantly smaller and partially hidden storage area, which also includes facilities for employees and hygiene loops. In the last, rear part is the service. This is the second dominant part, highlighted by an illuminated expanded metal facade. The main material on the building is concrete, which is in line with the industrial character of the building and its surroundings. The façade is made of Cetris cement-fiber boards, which resemble the structure of white concrete. In the service building, the facade is solved with an openwork facade made of expanded metal, under which there is a smooth lime-cement plaster of white color. Concrete structures are also copied into the interior, especially by the recognized load-bearing elements in the individual parts.
|
|
|
Car showroom
Kováčová, Zuzana ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The subject of the Bachelor thesis is a static and structural design of a steel construction of a car showroom in Trnava. I tis a two-bay construction with a mono-pitched roof. As a first, the load was calculated, next the structural version was determinet. Structural analysis was made with Dlubal RFEM software. Main load-bearing elements were designed and checked, including reinforcing members, column anchorage and selected connections. Were made a calculations, drawing documentation and technical report.
|
|
|
Prefabricated construction od car-showroom
Wolf, Jiří ; Švaříčková, Ivana (referee) ; Zlámal, Martin (advisor)
Aim of the final thesis is to create loadbearing prefabricated structure of building, which serve like office building and area for car-showroom, and creating static assessment of main supporting parts. For those parts will make drawing documentation of reinforcement and shapes. Computational 3D model for evaluation of internal forces is realized in Dlubal RFEM 5.07 software. For better check and comparison were create 2D spatial bar models of selected frames.
|
|
|
Autocentrum Brno VW
Kubitová, Markéta ; Rosendorf, Aleš (referee) ; Boleslavská, Yvona (advisor) ; Sedláková, Markéta (advisor)
The aim of the bachelor thesis was to create the documentation for building permit and documentation for the construction of the building, which is based on a previously elaborated study under the subject AG33 - Production Structures. This is a project of the carcentre Volkswagen Group in Brno-Zábrdovice. The assigned building site is located on a flat land and is bordered by the streets Cejl, Jana Svobody, blocks of flats and the river Svitava. The carcentre consists of three functional units - a showroom, a spare parts shop and a garage. Within the framework of the bachelor thesis, a showroom was developed. Compared to the garage it is architecturally more interesting because it is used for the exhibition of VW group cars and it should be interesting for passers-by. At the same time there is a warehouse of the spare parts because of the direct contact of the goods with the showroom and the garage. The object is hallway type, two-storey, non-cellar. There are a passenger lift and a car lift for the exhibition of cars on the 2nd floor. The supporting structure is a steel framing, supplemented with reinforcing elements. The skeleton is based on reinforced concrete beads and interlocked piles due to unstable subsoil. The building is covered with a single-layer flat roof, which is carried by steel girder beams. The casing is made up of Kingspan facade panels, fitted with a perforated stainless steel plate. From the south side (Cejl Street), the facade is made up of a Schüco glass facade system.
|
|
|
Car Showroom, Holešov
Olšáková, Klára ; Kolářová, Eva (referee) ; Kolář, Radim (advisor)
The task of the master's thesis is to elaborate a project documentation for construction works for new car showroom in Holešov. The new building is located in the cadastral territory of Všetuly. The building is designed as a two-story, detached, set on a flat plot of land. The first floor can be divided into a car showroom, technical and hygienic facilities for employees and customers, and into a car service. On the second floor, there are offices, a meeting room, an archive and hygienic facilities. The entrance to the building is oriented from the north side of the building. The car showroom is based on a foundation of pre-fabricated cup footings connected by means of pre-fabricated reinforced concrete foundation sills. The supporting system of the building consists of a prefabricated reinforced concrete skeleton. Ceramic masonry are used as infill masonry. The ceiling structures are designed as pre-stressed reinforced concrete panels. A single-arm prefabricated reinforced concrete staircase with the mezzanine connects the individual floors, which is located inside the building. The roof of the building is designed as a flat vegetation extensive roof. The building is insulated with boards made of glass mineral wool and sheathed using a ventilated facade system with cladding made of bond boards.
|
|
|
Steel construction of the car showroom
Bystrianská, Kateřina ; Pilgr, Milan (referee) ; Štrba, Michal (advisor)
The diploma thesis deals with the design and assessment of the steel construction of the car showroom in Jihlava. The ground dimensions of the structure are 40,0 x 52,0 m and the height at the highest point is 13,14 m. The supporting structure consists of a truss girder consisting of a set of arches, outer columns and an inner column with a strut. This is a freebase system, the distance of the bindings is 4.0 m. In the framework of the work is elaborated the comparison of two variants, more suitable includes the static calculation of the main supporting parts, including the joints and details. The main construction material is steel, grade S 355.
|
|
|
Car Showroom
Schusterová, Soňa ; Brzoň, Roman (referee) ; Bečkovská, Tereza (advisor)
This thesis deals with the elaboration of construction project documentation of newly built car showroom with authorized service station and financial centre located in the city of Kroměříž. The building was designed as self-standing with one underground and two above ground floors and is conceptually divided into three tracts – car showroom itself, technical facilities and authorized service station. There are underground garages, storage of new cars and technical rooms situated in the basement. Showroom, sanitary facilities and operational premises, separate client services such as reception, new car selling desk, service station desk, spare parts selling desk or reception technician desk are situated on the ground floor. Also there are storage of spare parts, car wash with utility room and facilities for employees of service station. Service station itself and storage of tires are adjacent to these areas. First floor is only partial and includes financial department, offices and directorate. Construction system of this building is designed as reinforced concrete skeleton with cross-reinforced boards. The skeleton is partially blocked by porous concrete blocks 300 mm thick with thermal insulation of mineral wool 200 mm thick (main part) and 160 mm thick (service station, storage). The facade is ventilated and glazed facade system is used.
|
|
|
Autosalon
Balúch, Tomáš ; Pospíšil, Jaroslav (referee) ; Pěnčík, Jan (advisor)
This master's thesis focuses on design and elaboration of documentation for construction of a Car Showroom. The building is divided to two functional parts. The building is to be situated on plot number 1333/21, cadastre unit: Bohunice. The building is to be located on an undeveloped plot in possesion of the investor. The parking lots are connected to a local road. All substantial infrastructures are located nearby the plot. The proposition and the design of the building have respect for both commune plan and current buildings. The documentation is elaborated with regard to the contemporary Czech legislative and standards. The project designs the building, which is divided in two functional parts: SO 01 & SO 02, both operationally and visually connected. Contructions of objects are structurally independent. The first object includes exhibition hall with capacity of 8 exhibited cars. There is also to be located the administrative part, waiting rooms for customers, facilities for employees and the warehouse. The second object includes car repair shop. There are also to be located facilities for employees of the service, workshop, room for a car handover, hand car wash and an utility room. Construction is designed as a reinforced concrete columnar structural system with prefabricated single footings, self-supporting foundation slab and reinforced concrete ceiling slab with integrated girders above first floor of the object SO 01. The roofs of the building are designed as a flat roofs and the support constructions are made of steel. Planned dimensions of autosalon are 41x18 metres. As a cladding of the first object is used the lightweight glass cladding. For masonry walls are used the 250 mm thick ceramic blocks, mineral insulation and ventilated external facade cladding with use of fiber-cement boards. Planned dimensions of car repair shop are 31x28 metres. As a cladding of the second object are used the sandwich panels with foam core made of PIR.
|
guest ::
