|
|
Analysis of Ceiling Heating
Carbol, Ladislav ; Plášek, Josef (referee) ; Vendlová, Lucie (advisor)
Diploma thesis deals with analysis of radiant ceiling heating in VUT dormitories. The work contains a theoretical analysis of radiant and convection heat transmission of ceiling heating. Part of this work is creation of mathematical model for evaluation of variables typical for radiant ceiling heating. Model outposts are compared with data measured on a real building.
|
|
|
OPTIMIZATION OF WELLNESS AIR CONDITION
Kysilka, Michal ; Zubíček, Vojtěch (referee) ; Šikula, Ondřej (advisor)
The theme of diploma thesis is a design optimization of air distribution in swimming-pool hall with regard to free water surface evaporation. This problem was solved according to determined criterions with the aid of CFD simulation. Experimental measurement part of the thesis deals with evaporation problems where own formula for this physical phenomenon is determined. This formula is compared with already known algorithms. Author suggests that such formula might be integrated in CFD software.
|
|
|
Heating systems in preschools
Schäferová, Hana ; Topič, Jan (advisor)
The topic of a master thesis is solution of infant’s school heating. The thesis summarizes state of art infant’s school heating from practical and legislative point of view. The thesis contains solution of infant’s school heating created by author of thesis. In addition, the thesis contains an experiment which is focused on examination of heat output from cover radiator.
|
|
|
Thermal properties of electric machine
Buřil, Pavel ; Vítek, Ondřej (referee) ; Janda, Marcel (advisor)
This bachleor's thesis is dealing with choosing of right consecution for simulation of thermal attributes (propagation of heat) in electrical machines. In next part, there is descripted redraw of the real model of machine with using FEM and following simulation in Ansys Workbench development environment. Base was the real measurement of asynchronous motor. In detail shows today's usual methods of development in similar problematics. Purpose of tihs Bachleor's thesis is to serwe as a study aid.
|
|
|
Thermal analysis of synchronous machine
Bartoň, Petr ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
The master’s thesis deals with analysis of warming and cooling of synchronous machine. The warming is caused by the machine’s losses resulting from the conversion of electrical energy into mechanical energy. There then can be achieved high values of temperature on the machine, which can lead to destruction of the machine. The transient thermal analysis, working on the finite element program Ansys Workbench, is used for thermal analysis. As an appropriate instrument, which serves for flow calculation, a module CFX in the program Ansys Workbench may be used. In the practical part the model for unhampered alternator with current in the field winding only was measured and after that, the measured values were compared with the results of transient thermal analysis. Speed and progress of air flow through machine were analyzed with CFX module.
|
|
| |
|
|
Local Ventilation
Bilík, Martin ; Otáhal, Jan (referee) ; Krejčí, Vladimír (advisor)
This bachelor thesis deals with local ventilation, especially a variant of the local exhausting. At the start of work shall indicate the reasons why it is ventilation very important. There are listed some requirements for ventilation of technical and legislative terms. Ventilation systems are analyzed by several criteria in the next part. The next chapter of this work is devoted to systems and methods of local ventilation. In one chapter is made and a description of the distribution parts of the ventilation system. The last chapter deals with designing and using exhaust adapters. There is also made comparison of their parameters, which represent the operating costs associated with using these adapters.
|
|
|
Study efficiency of modern thermal insulation for buildings
Šot, Petr ; auditor, Karel Trojan, Brno, energetický (referee) ; Šťastník, Stanislav (advisor)
The bachelor´s thesis deals with the problem of thermoreflect insulation. The small part of thesis focuses on the energy demand of buildings and its problems. Then the greater extent is analysed problems by heat transfer of material. It includes effects arising from the individual methods of heat transfer and defines the level of expression of individual methods of heat transfer in materials. The thesis presents an overview of experimental methods for determining thermal insulating properties of insulators. Then there is shown a selection of the most widespread insulation materials used in today´s construction. It includes the division of insulators in terms of used materials and subsequent classification of the most used materials in these groups. Another part of thesis deals with the thermoreflect isolation. There are mentioned the necessary concepts for the study of thermoreflect thermal insulation, which include the emissivity surface, the coefficient of mutual radiation and translucency of the material. Then there is described the method heat transfer of thermoreflect isolation. On the next there are presented experimental methods of determining thermal insulating properties thermoreflect thermal-insulating material. The thesis also includes a practical part, which contains the measurement results on a small range of samples taken termoreflection insulators. In the end there is mentioned a brief realization of thermoreflection thermal insulation materials in buildings.
|
|
|
Experimental study of high rayleigh number convection using cryogenic gaseous 4He
Urban, Pavel ; Musilová, Věra ; Skrbek, L.
Several laboratories worldwide try to elucidate the underlying mechanisms of turbulent thermal convection using cryogenic He gas, a working fluid with truly remarkable and widely tuneable properties. The focus is on the efficiency of the heat transfer, experimentally studied via the Nusselt (Nu) versus Rayleigh number (Ra) dependence, especially at very high Ra. In order to resolve existing controversies among published results, we designed and built a cryogenic apparatus capable of reaching Ra up to 2 × 10e15, thus covering the range of interest where various transitions such as that into the theoretically predicted ultimate Kraichnan regime have been claimed. The cylindrical convection cell of 300 mm both in diameter and height is designed to withstand pressures up to 250 kPa at working temperatures between 4.2 K and 12 K. The main advantage of this apparatus is minimized influence of its cell design and materials used on the studied convection. The first experimental results are resented.
|
|
|
System for measurement of the heat transfer coefficient
Pavelka, Miroslav ; Trávníček, Zdeněk
This report describes a system, which was developed for measurement of the convection heat transfer coefficient between air and a wall. The system is based on thermopile wall-mounted heat flux sensors. The boundary condition of homogeneous wall temperature is realized by means of an electrically heated wall. System performance was tested for a reference task of an axisymmetric impinging jet. The results were compared with available literature and with another (own, naphthalene sublimation) results. A proper function of the system was confirmed.
|
guest ::
