|
|
Kindergarten
Chroustová, Natálie ; Machala, Jan (referee) ; Brukner, Bohuslav (advisor)
The subject of this diploma‘s thesis is documentation for the construction of the new kindergarten in Vsetín. It is a two-storey partial basement building with an elevator. There are three classes devided by age, for children aged three, for children aged four and for children aged five-six. The class for the youngest children is in the lowest floor. There i also a kitchen, a dinning room and staff facilities. The classes for older children are in the highest floor. The second kitchen and the second dining room are also located here, as well as the director’s office, speech therapy and a classroom for teaching English. The outdoor playground is designed as cascade and is accesible from all classes. To the new building belongs two parking lots. One with eleven classic parking spaces and one parking space for people with impaired ability to orientate and move, intended primarly for parents of children. There is also parking space for bicycles. Second with four classic parking spaces intended for staff. The technical facilities are located in underground floor. We can find here utility room, an air conditioning engine room, photovoltaics engine room, bedding warehouse connected to a laundry and cleaning room. The new kindergarten is based on reinforced concrete foundation slab. The vertical load-bearing structures of the underground and above-ground external part of the building are made of cast-in-place reinforced concrete wall. Internal walls are made of bricks. The floor structures in the whole building consists of prestressed concrete panels. The roof of the building is a warm flat green roof. The ventilated facade of the building is made of bond S-Z type facade panels.
|
|
|
Apartment Building
Zemánek, Petr ; Pilík, Václav (referee) ; Struhala, Karel (advisor)
The subject of this bachelor's thesis is a design of an new apartment building in Bystřice nad Pernštejnem. It is a three-storey building situated on a slightly sloping terrain. The building is detached. The entrance is from the north side, where is an existing acess road. There are 4 same house units in the apartment building. The building is made of ceramic brick blocks. The ceilings are made of prestressed reinforced concrete panels and reinforced concrete prefabricated elements. The roof is flat, single-skinned, green and with a constant inclination. This work contains documentation of the real execution.
|
|
|
Realization of the upper rough construction of apartment building in Prague
Ivanova, Anastasiia ; Venkrbec, Václav (referee) ; Novotný, Michal (advisor)
The aim of this bachelor thesis is to solve the stage of the upper rough construction of apartment building in Prague. The house made up of a monolithic structure. This monolithic structure consists of walls and ceiling slab. Stairs designed as prefabricated mounted on monolithic landing and half landing. The landings are part of the ceiling slab, the half landings will be carried out additionally by means of the reinforcement frames in the staircases. The object’s construction system is bi-directional. The building is basement and has ten aboveground floors and two underground.
|
|
|
Construction project for implementation of Retirement home Žacléř
Bonaventura, Pavel ; Průcha, Aleš (referee) ; Kantová, Radka (advisor)
The aim of this diploma thesis is to prepare the construction of a Home for the Elderly in Žacléř. The work deals with technical regulations for the dismantling of asbestos roofing, demolition work and monolithic structures. For these regulations, a time plan for the implementation of monolithic structures, a control and test plan for monolithic structures, an itemized budget and a time and financial plan - object-oriented will be prepared. Furthermore, this work contains the coordination situation of the construction with broader transport relations, the design of the assembly machine, the report for the construction site equipment with drawings of the construction site equipment for individual technological regulations and last but not least the health and safety plan and assessment of construction noise. As part of the diploma thesis, several appendices were prepared for this stage, such as crane assessment, details of monolithic stair arms, noise wall scheme, budget for construction site equipment, environmental plan, ceiling and wall formwork scheme and staff balance for selected stages.
|
|
|
Municipal Office Rapotín
David, Tomáš ; Daněk, Lukáš (referee) ; Utíkalová, Ivana (advisor)
The diploma thesis deals with the administrative building, which will serve as a municipal office in Rapotín. The building is designed as an extension to the existing cultural center Rapotín. The building structure is made as a masonry construction with ceiling construction of prestressed panels Spiroll. Single-layer flat roof is divided into two levels, the lower part is extensive green roof and the top of the roof is made such as usual flat roof. The building has two floors and partial basement coverage as well. The building is provided with four sheltered parking lots.
|
|
|
Flat Building
Podepřel, Petr ; Ducháč, Petr (referee) ; Požár, Michal (advisor)
The thesis deals with the design and calculation of selected parts of an apartment building in Brno. The apartment building is 6 floors (one underground floor and 5 above-ground floors), the underground floor is the entire reinforced concrete. The work focuses mainly on the static design and assessment of individual elements of reinforced concrete structures. The assessed load-bearing elements are the roof slab, ceiling slab 1.PP, prefabricated staircase, elevator shaft and so-called white bath (foundation slab, walls). All calculations are performed using SCIA Engineer. Individual ceiling slabs and staircases are solved by 2D models and the construction of the white bathtub is made in a 3D model. The design proceeded according to valid European standards ČSN EN 1992-1-1 and ČSN 73 1201. The result of this work is static design of reinforcement of all solved parts and drawing documentation.
|
|
|
Apartment building
Chroustová, Natálie ; Bartošová, Andrea (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor's thesis is documentation for the construction of the new apartment building in Janová. It is a four-storey basement building with an elevator. There are eighteen residential units in the apartment building. Some of them have access to a balcony or loggia. Each apartment has its own parking space directly in the building or in front of the building. The most part of basement is made up of a collective garage with seven parking spaces and one parking space for people with impaired ability to orientate and move. There is also a parking space for bicycles, a room with cellars, a technical room, an air conditioning engine room, a room for electricity meters, a carriage house and a cleaning room. The upper floors are made up of individual housing units with layouts of 1+kk, 2+kk, 3+kk and 4+kk. The new apartment building is based on concrete strip footings and foundation pads. The vertical load-bearing structures of the underground part of the building are made of cast-in-place reinforced concrete wall. In the above-ground part of the building is designed structural longitudinal and transversal masonry system made of bricks by Porotherm. The floor structures in the whole building consists of cast-in-place reinforced concrete slabs. The roof of the building is a warm flat green roof. The ventilated facade of the building is made of bond S-Z type facade panels.
|
|
|
Locally Supported Reinforced Concrete Slab
Kožušník, Přemysl ; Perla, Jan (referee) ; Požár, Michal (advisor)
The bachelor thesis deals with the design and assessment of selected load-bearing elements of the reinforced concrete structure of an office building. The elements include a locally supported floor slab above the 1st floor, a column and a footing. In addition, the design of a prefabricated staircase was carried out. The internal forces were analyzed using the finite element method in SCIA Engineer and the results were verified using the sum of moments method. The result of the work is a static calculation and drawings.
|
|
|
Apartment building
Chroustová, Natálie ; Bartošová, Andrea (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor's thesis is documentation for the construction of the new apartment building in Janová. It is a four-storey basement building with an elevator. There are eighteen residential units in the apartment building. Some of them have access to a balcony or loggia. Each apartment has its own parking space directly in the building or in front of the building. The most part of basement is made up of a collective garage with seven parking spaces and one parking space for people with impaired ability to orientate and move. There is also a parking space for bicycles, a room with cellars, a technical room, an air conditioning engine room, a room for electricity meters, a carriage house and a cleaning room. The upper floors are made up of individual housing units with layouts of 1+kk, 2+kk, 3+kk and 4+kk. The new apartment building is based on concrete strip footings and foundation pads. The vertical load-bearing structures of the underground part of the building are made of cast-in-place reinforced concrete wall. In the above-ground part of the building is designed structural longitudinal and transversal masonry system made of bricks by Porotherm. The floor structures in the whole building consists of cast-in-place reinforced concrete slabs. The roof of the building is a warm flat green roof. The ventilated facade of the building is made of bond S-Z type facade panels.
|
|
|
Construction project for implementation of Retirement home Žacléř
Bonaventura, Pavel ; Průcha, Aleš (referee) ; Kantová, Radka (advisor)
The aim of this diploma thesis is to prepare the construction of a Home for the Elderly in Žacléř. The work deals with technical regulations for the dismantling of asbestos roofing, demolition work and monolithic structures. For these regulations, a time plan for the implementation of monolithic structures, a control and test plan for monolithic structures, an itemized budget and a time and financial plan - object-oriented will be prepared. Furthermore, this work contains the coordination situation of the construction with broader transport relations, the design of the assembly machine, the report for the construction site equipment with drawings of the construction site equipment for individual technological regulations and last but not least the health and safety plan and assessment of construction noise. As part of the diploma thesis, several appendices were prepared for this stage, such as crane assessment, details of monolithic stair arms, noise wall scheme, budget for construction site equipment, environmental plan, ceiling and wall formwork scheme and staff balance for selected stages.
|
guest ::
