|
|
Heating of panel house with alternative preparation of TV
Bílek, Martin ; Adam, Pavel (referee) ; Horák, Petr (advisor)
The subject of this thesis is the heating and hot water preparation in the residential house in Brno. object has eight floors and basement. In each floor there are five residential units. In the basement there is a utility room with heating, gas boiler cascade. Used to heat-pipe heating system. Heating surfaces are plate and tubular body. The primary source of hot water is gas boiler. As a secondary source of alternative preparation with solar home stations. Each apartment has its own solar station.
|
|
|
Fittings of heating systems
Klus, Lukáš ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The theme of this diploma thesis is fittings of heating systems and it is divided into three parts. The first part deals with this topic on theoretical level. In the second part, there is a calculations and drawings that deals with heating and water heating of the apartment building in Uherské Hradiště. This part is solved in two variants concerning hydraulic balancing and regulation of the heating system. The last part of the thesis is an experimental solution and processing of pressure loss results of selected valves. These results are compared with the values reported by the manufactures of the valve.
|
|
|
Foundation Design of the Athletics Stadium in Pilsner
Drs, Jakub ; Boštík, Jiří (referee) ; Glisníková, Věra (advisor)
The task of thisbachelor dissertation is to describe the concept of safe and economic foundation of the athletic stadium in Plzeň, the Czech Republic. The concept and assessment are developer on the basis of obtained geotechnical conditions and the load of the construction. The calculations are based upon valid forms and the concept approaches. Furthermore, the thesis focuses on technology and working proces of large diameter bored piles.
|
|
|
Fluid power heating system
Paták, Jiří ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The theoretical part deal with problematic of fluid power heating system. The experimental part deal with measurement of the characteristic of circulation pump and measurement of valves - ball valve. The project solves the heating and hot water preparing for the new administrative building in Žďár nad Sázavou. The building has 3 floors. As a source of heat for the winter season is designed gas boiler, for hot water preparing is also used the same gas boiler. The heat source is placed in a separately accessible room.
|
|
|
Heating of multifunkcional building
Kořenková, Veronika ; Formánek, Marian (referee) ; Počinková, Marcela (advisor)
The goal of this bachelor thesis is to introduce a heating system solution for multifunctional building. Thesis is divided into theroretical, calculation and project parts. Theoretical part is focused on the definition of fittings in heating systems. Second part depict the proposal of heating system and heat preparation of the multifunctional building, which contains veterinary clinic and housing units. Gas condensing boiler is chosen as a source of heat. The building is heated by steel panel radiators and towel rail radiators. Preparation of hot water is done by two indirect heating water storage tanks. Preheating of water is supported by solar collectors. Project part of the thesis contains technical report and drawing, based on the calculation part.
|
|
|
Condensing boiler and solar collectors in a residential building
Bukovjan, Jiří ; Vendlová, Lucie (referee) ; Horák, Petr (advisor)
The subject of this thesis is the heating and hot water preparation in the residential house in Rožnov pod Radhoštěm. Object has four floors and basement. In each floor there are two residential units. In thebasement there is a utility room with heating, gas boiler cascade. Used to heat-pipe heatingsystem. Heating surfaces are plate and tubular body. The primary source of hot water is gasboiler. As a secondary source of alternative preparation with solar system.
|
|
|
Safety of automated industrial valves in operating conditions
Kryštof, Ondřej ; Trávníček, Petr (referee) ; Kotek, Luboš (advisor)
Choosing suitable and safe valve with accessories depends on general specifications for plant. Using valve for on/off, throttling, back-flow prevention, etc., pressure drop is related with Kv value or leakages from piping systems are main factors for properly valve selection. Valve have to resist chemicals and substances that may change the state, temperature and its fluctuation, pressure, corrosion and erosion. This properties determine pressure class, temperature resistance, connection into pipe and sealing material as gland packing, seats, seal between flange etc. This and other specification, listed in this thesis, can help determine suitable type of valve. This thesis deals construction design of valve and accessories as well. The last chapters are focused on calculation of safety valve and selection safe and appropriate control valve with accessories.
|
|
|
Water supply of scout camp by hydraulic ram
Růžička, Jakub ; Duchan, David (referee) ; Špano, Miroslav (advisor)
This work is dealing with water supply of a scout camp from Trusovický potok. The water is pumped with a ram pump to the water tank. The construction of the ram pump is simplified and it is collected from commonly available fittings and fixtures. The water from the tank is distributed by pipe network gravitationaly. Operating charakteristics of the hydraulic ram pump were measured in the laboratory.
|
|
|
Technological Solution of the Rough Superstructure of the Municipal House U Muchů
Bystričan, Daniel ; Porwisz, Ondřej (referee) ; Mohapl, Martin (advisor)
The main goal of my bachelor's thesis is the construction-technological solution of the rough superstructure of the Municipal House U Muchů, which is located in the village of Dolní Město near the larger town of Humpolec in Vysočina. This work contains a technical report for the given technological stage, the situation of the construction with wider relations of transport routes, a statement of dimensions for the technological stage, a technological regulation including a balance of resources (item budget together with a graph of the deployment of workers). Furthermore, the content of this work is a drawing of the construction site equipment together with a technical report and construction organization solution for the rough superstructure, a timetable for the given stage, a design of the machine assembly including a comparison of two variants and the selection of the most suitable machine, control and test plans and ensuring work safety. In the last point of this work, I am dedicated to verifying the adhesion and load-bearing capacity of the connecting material, more specifically, it is a polyurethane adhesive for masonry.
|
|
|
Determination of closing valve control moments
Benda, David ; Vosynek, Petr (referee) ; Hnízdil, Milan (advisor)
This bachelor thesis deals with the calculation of the torque on the output shaft of the four-concentric butterfly valves and experimental measurement of this torque on real manufactured valves. At the beginning is carried out a brief research, the purpose describe the basic components of the butterfly valves, its production variants of the offset disc, eventually types of fittings to piping. The main part describes the partial torque occurring on the individual components. Following data from the performer measurement and at the end are compared obtained results.
|
guest ::
