|
| |
|
|
Chaos
Vogelová, Tereza ; Fajnor, Richard (referee) ; Stratil, Václav (advisor)
The existing world is becoming more disrupted and is falling apart. For its resurrection and restoration, a new way of thinking is necessary. This new type of thinking is needed to be able to open up its mind and to think about the process of thinking itself; it must understand what is happening in other systems, where processes seem to be taking place by themselves without any other visible interference. First Chaos is the title for an intermedia installation which contains 90 black and white photographs, both digital and analogue, all of which were taken between the years 2008 and 2012. Together, the photographs create one coherent piece – a kind of sculpture. They can evoke a "still film" with a non-linear, cyclical storyline, whilst the images can simultaneously function individually, without any connection to other photographs.
|
|
|
Power supply
Matějů, Jan ; Uher, Miroslav (referee) ; Beneš, Petr (advisor)
This work is focused on development of a laboratory power source with low output ripple, its construction and measuring its basic parameters. Basic point of interestion is systems design of a digital controled power source. Document describes problems which has occured and its solutions. Describes designing of a circuit board, its construction and measuring its parameters. Below describes system design, construction and examination of a display and keyboard for operating the device. As a result of this work is realized and measured system design, which achieved relativem low levels of output ripple, short reaction time on change of load, but slower reaction of a current limit. Some parameters has not been entirely fine-tuned, especialy speed of reaction of current limit, amplitude of output distortion volage and stability diring short circuit on output clamps.
|
|
|
Implementation of PSD controller into microcontroler MCF52233
Lang, Stanislav ; Holek, Radovan (referee) ; Macho, Tomáš (advisor)
The goal of my bachelor thesis is the project and realization of a digital regulator, including the possibility of user’s settings. The first two chapters, which present a theory and a survey of the problem of digital regulation, offer an introduction as far as the used hardware (32-bit microcontroller M52233 from the company Freescale) is concerned. The main part of my thesis deals with the description of concrete implementation of regulation algorithms into the selected hardware as well as the communication with the regulation unit and the selection and basic configuration of the peripheral used.
|
|
|
Signal and data logger
Borsányi, Tamás ; Vyskočil, Pavel (referee) ; Kolouch, Jaromír (advisor)
The goal of this project is to design a signal and data logger, which captures analog and digital signals with very long record time. The device supports multichannel complex triggering, a real-time oscilloscope-like mode and an offline mode for analyzing of previously sampled data. This project contains detailed analysis of the topic, description of hardware and software solutions and used methods. The thesis also contains verification tests and measurements. This device will be mainly used for hardware debugging of microprocessor based applications.
|
|
| |
|
|
Electronic system of language education laboratory
Skoumal, Martin ; Bradáč, Zdeněk (referee) ; Zezulka, František (advisor)
This work deals with the creation of electronically controlled audio system for the language classroom. Possible solutions compares analog and digital form. Furthermore, describes the final system that was designed. The resulting system is implemented by analog amplifiers and analog crosspoint matrix. Hardware control is realized by microcontroller and that is controlled from the computer.
|
|
|
Software for Microscope Image Processing and Analysis
Pavlišta, Libor ; Odstrčilík, Jan (referee) ; Čmiel, Vratislav (advisor)
This project informs about the basic image processing on grayscale and binary images. The project deals with analyzing the data obtained. Acquaints with terms such as morphology and image segmentation. Acquired knowledge is applied to create a program to complete the processing of microscopic images in LabView programming environment with subsequent analysis and plotting of results into image. For a better idea supporting data about operation in progress are continuous images.
|
|
|
Digital controlled resistor
Sedlář, Petr ; Petržela, Jiří (referee) ; Šotner, Roman (advisor)
This master´s thesis deals with the design of the control circuits for digital potentiometers and their application in analog systems. Digital potentiometers are three-terminal resistors with an adjustable center connection. The digital potentiomneters enable to drive logic gates, LED drivers, LCD drivers, analog switches etc. Controlling of these mentioned devices is possible by the I2C 2- wire serial bus (invented by Philips). The digital potentiometers are used to control of the primary parameters like cut-off frequency and quality factor in the state variable filter and cut-off frequency in a passive filter. Both filters are simulated in PSpice and then compared with the measured results. Next parts of this master's thesis are a computer program and a exemplary protocol.
|
|
|
Communication assembly for optical cableless linking
Kapuš, Martin ; Kovář, Jan (referee) ; Kolka, Zdeněk (advisor)
This Graduate Thesis is about communication module for optical wireless network. This device read data from RS232 port and two analog inputs and sends it through internet to a remote Computer. Furthermore allows voice communication between local user on module and user on remote computer. Device allows communication with standard headphones and microphone, or with Bluetooth handsfree. Basic part is microprocessor MCF5223 and Bluetooth Ezurio BISM II module. Control program has been written in C language. Printed circuit is created by EAGLE program. This device is managed via web interface and settings have been stored into EEPROM memory. Work contains description of separately parts and blocks, source code of program, description of source code and printed circuit designs.
|
guest ::
