|
|
Optimization and parameter measurement of PON network FTTX
Černý, Michal ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
Práce rozebírá současný vývoj na poli pasivních optických sítí a jednotlivé generace přenosových standardů. Podrobněji se zabývá parametry ODN, metodami jejich měření a volbou potřebných měření v praxi. Hlavní část práce je zaměřena na měření pasivního WDM prvku, kde je provedena analýza vstupů a výstupů, měření vložného útlumu a přelechů podle ORL na provozních vlnových délkách.
|
|
|
Portable device for impedance measurement
Kopic, Jan ; Hruboš, Zdeněk (referee) ; Šotner, Roman (advisor)
This thesis targets on design of portable device for impedance measurement. Theoretical knowledge related to the construction of a portable impedance analyzer is summarized in a separate chapter. This section also compares some commercially available impedance analyzers. In addition, this thesis contains a description of the principle of operation of the impedance analyzer, which is divided into individual function blocks and supplemented by control circuits. A large part of the work focuses on the design of the analog measurement circuit, where suitable measuring methods are also presented. The functionality of the analog blocks of the device was verified by circuit simulation in the PSpice program and by experimental tests. Selection of some components is mentioned in the relevant chapters, where the essential parameters from datasheets are listed. The output of the work deals with a designed prototype of the device, which was tested. Based on the findings some modifications of the device were proposed for practical usability. The attachment of the thesis contains final version of designed printed circuit board.
|
|
|
Differential electromagnetic analysis
Novotný, Bohumil ; Člupek, Vlastimil (referee) ; Martinásek, Zdeněk (advisor)
This diploma thesis studies the theory side channels, simple and differential analysis, and types of attacks on the side channel, which may be run against the cryptographic system. The thesis explains the principles of side channel attack on a possible defense against them. The second part of the thesis describes experimental work created, its individual components and their functions. The findings builds custom solutions attack the electromagnetic side channel using electromagnetic probes and the workplace equipment developed for this task. The final part of the thesis is devoted to the description of the implemented algorithm, a description of measurement, measurement results and possible modifications of algorithms implemented in the microcontroller for full automation of the attack on the device, against which the attack was conducted.
|
|
|
Spectral characteristics measurement of single fibre optical transmission
Balon, Radek ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
The main object of the bachelor´s thesis is show familiarize with optical networks and measuring when the fibres are connected to operating network. The whole thesis was separated into several parts. The first part was deals with optic fiber and properties, kinds of optic fibers, methods of propagation light inside fiber and important parameters, which has undesirable effects, such as optic loss and dispesive influences. Next part was concentrated on transfer technologies, which where used for data transmission in operating networks. We talked about differences between technologies and describe the monitoring system, which was used for measuring parameters in operating network. The last part was focused on own measuring. We was measured the parameters in operating network CESNET2 and influence of the signal after connect optic monitoring probe. Measuring was implemented on optical network of Masaryk University in Brno (ÚVT MU).
|
|
|
Introduction of measurement methodology using 3D scanning technology into mechanical production
Klein, Adam ; Jankových, Róbert (referee) ; Šrámek, Jan (advisor)
This thesis focuses on comparison of the commonly used method of tactile measurement with 3D scanning methods for their introduction into engineering production. The first part summarizes the current state with the description of measurement technologies with emphasis on 3D technologies and their versatile use. The second part presents a practical comparison of three types of measuring devices on a selected component of a bicycle. After numerical and graphical evaluation of the measurement results, these values are further statistically processed and the measurement uncertainties are calculated. The final part of the work evaluates the whole process and presents practical suggestions, options and recommendations.
|
|
|
Emotional intelligence and approaches to its cognition and measurement
Tarasenko, Sabina ; Boukalová, Hedvika (advisor) ; Niederlová, Markéta (referee)
The purpose of this study is to provide an overview of the development of the concept of emotional intelligence, the most important concepts dealing with this topic and the methods used for its recognition and measurement, which are associated with models. For better orientation in the topic, the concept of emotions and emotional intelligence applied in selected fields is also explained and defined. In the empirical part, the research is designed to create measurement methods of emotional intelligence, which utilizes the integrated model and combines the self-assessment questionnaires from more models with FACS and MSCEIT. Research should, on a large stratified sample, show, if the newly created method validly measures the level of emotional intelligence through parallel validation of the MSCEIT. Finally, it describes the possibilities of using the method and the actual outcome, expressed with the emotional quotient, in practice.
|
|
|
Analysis of liquid electrolyte electrical parameters using impedance spectroscopy
Brabenec, Josef ; Pikula, Stanislav (referee) ; Havránek, Zdeněk (advisor)
The bachelor thesis deals with impedance spectroscopy of electrochemical systems, especially liquid electrolytes. The method of impedance spectroscopy is widely used to describe electrochemical cells, batteries and electrolytes for diagnostic purposes over a wide range of frequencies. This thesis presents the main types of impedance imaging in the complex and frequency domain, as well as basic information on the measurement methods used and the methods for impedance analysis. The main part of the thesis was the development of software for automated impedance measurements and estimation of equivalent circuit parameters using basic and specialized circuit elements. A workplace with fabricated electrodes for liquid electrolyte measurements was prepared for the application. The functionality of the application was verified by real measurements of different concentrations of water and salt solutions. The validity of the estimated equivalent circuit parameters was verified on measured simple circuits connected from basic circuit elements and was also verified using the commercially used ZView software.
|
|
|
Portable device for impedance measurement
Kopic, Jan ; Hruboš, Zdeněk (referee) ; Šotner, Roman (advisor)
This thesis targets on design of portable device for impedance measurement. Theoretical knowledge related to the construction of a portable impedance analyzer is summarized in a separate chapter. This section also compares some commercially available impedance analyzers. In addition, this thesis contains a description of the principle of operation of the impedance analyzer, which is divided into individual function blocks and supplemented by control circuits. A large part of the work focuses on the design of the analog measurement circuit, where suitable measuring methods are also presented. The functionality of the analog blocks of the device was verified by circuit simulation in the PSpice program and by experimental tests. Selection of some components is mentioned in the relevant chapters, where the essential parameters from datasheets are listed. The output of the work deals with a designed prototype of the device, which was tested. Based on the findings some modifications of the device were proposed for practical usability. The attachment of the thesis contains final version of designed printed circuit board.
|
|
|
Introduction of measurement methodology using 3D scanning technology into mechanical production
Klein, Adam ; Jankových, Róbert (referee) ; Šrámek, Jan (advisor)
This thesis focuses on comparison of the commonly used method of tactile measurement with 3D scanning methods for their introduction into engineering production. The first part summarizes the current state with the description of measurement technologies with emphasis on 3D technologies and their versatile use. The second part presents a practical comparison of three types of measuring devices on a selected component of a bicycle. After numerical and graphical evaluation of the measurement results, these values are further statistically processed and the measurement uncertainties are calculated. The final part of the work evaluates the whole process and presents practical suggestions, options and recommendations.
|
|
|
Control of HVAC equipments
Zaoralová, Kateřina ; Weiglhofer,, Willy (referee) ; Rubina, Aleš (advisor)
The aim of the diploma thesis is application of the topic Control of HVAC equipments. The thesis is divided into three part – A, B, C. The first theoretical part deals with controlling/regulation in general, it focuses on controlling/regulation of HVAC equipments and it describes ways of air volume flow measurement, which relates to the third experimental part. The second part is focused on design of HVAC system in inpatient ward and fit-out for employees. In the third part was realized verification of air flow volume controller in two chosen buildings, whence in one there weren´t fulfilled manufacturer´s requirements and in the second one they were fulfilled. In conclusion there were compared measured values.
|
guest ::
