|
|
Biofeedback and its practical use
Dvořák, Jiří ; Hrozek, Jan (referee) ; Čmiel, Vratislav (advisor)
The aim of this work is describe common methods of biological feedback therapy that is used to treat some psychosomatic diseases. Subsequently, the description is focused on minimal brain dysfunction treatment by the help of EEG biofeedback. Properties and technical requirements for this therapy are concretized. The last part of this thesis is dedicated to the design and realization of practical software tool for EEG biofeedback therapy which is made in LabView 7.1. The M535 acquisition unit and NI USB-6221 measuring device are used for hardware solution.
|
|
|
Measurement of automotive alternators using LabVIEW
Kufa, Daniel ; Aboelhassan, Mustafa Osman Elrayah (referee) ; Vítek, Ondřej (advisor)
This work presents development system LabVIEW and the possibility to create virtual measuring devices. Particular realization of virtual measuring device within the frame of this work is applied on measurement of basic characteristics of claw-pole alternator. The structure and the principle of function of this alternator is described in brief. Created virtual measurement device is described in detail. The entire block scheme, that is the source code for LaBVIEW development system, is attached only in electronic form. The printed version contains front panel of the device and almost all the structures of block scheme.
|
|
|
The influence of alcaline accumulators loading on their parameters
Čech, Ondřej ; Vrbický, Jiří (referee) ; Sedlaříková, Marie (advisor)
This master's thesis deals with alkaline battery characteristics and it has special consideration of nickel-cadmium cells. There are three main experimental parts in this paper. First one is concerned with positive electrode materials properties and is aimed to investigate impact of magnesium ions formed into nickel hydroxide electrode structure. Second part deals with battery charging/discharging and response measurement tool design. National Instruments hardware PXI modules for data acquisition was used and program in LabView environment was made. Last one is concerned with nickel-cadmium cell properties changes during increased temperature stressing. Investigation of cell self-charge changes during lithium hydroxide addition into electrolyte was made.
|
|
|
HP89410A User Interface
Neužil, Jan ; Caha, Luděk (referee) ; Beneš, Petr (advisor)
The aim of this thesis was to develop user interface in LabVIEW to make typical measurements with spectral analyzer HP89410A There is introduced the theory of operation of an analogue heterodyne and a digital FFT spectral analyzer. It is explained the background of the Fast Fourier Transform. There are discussed the key settings in measuring with FTT analyzer, like window function, bandwidth, number of frequency points, or the averaging. Further is described the program, which was developed for measuring frequency characteristic by white noise and by stepped measurement. It was also made a module for measuring Signal to Noise Ratio and module for Total Harmonic Distortion. In the last part of this thesis are shown the results of processed exemplar measurements.
|
|
|
System for measuring properties of electronic transformers
Němec, Ondřej ; Havránek, Zdeněk (referee) ; Klusáček, Stanislav (advisor)
The purpose of this thesis was to study the properties of electronic current and voltage transformers, choose the method for temperature cycle accuracy test and the development of the measuring software. Measuring software was realized in LabVIEW version 8.2. The first part describe the topic of this thesis. The second part describes various kinds of sensors and describtion of functions and specifications. The third part describe programming system LabVIEW. The fourth describe design of connection supply and measurement part of circuit. The fifth part describes used instruments. The sixth part is about used methods measuring. In the seven part is the description of the functions of this program and its control. In eight part is evaluated measurement uncertainty. In the last part are shown examples of the application program.
|
|
| |
|
|
DC machine measurement and analysis using LabView
Loun, Lukáš ; Hájek, Vítězslav (referee) ; Vítek, Ondřej (advisor)
The virtual laboratory is divided into two groups. The first group is comprised of a virtual laboratory for simulation. It is mostly used for presentation and demonstration purposes. It is not necessary to install complicated and expensive software for their use. The second group of the virtual laboratory is a long distance measure. Real systems are measured with the help of this laboratory. The advantage of long distance measuring is that data from the measurements are saved directly onto the personal computer and they can be immediately evaluated. In this project the procedure for creating a virtual instrument for long distance measuring is described in the LabVIEW program. LabVIEW is a graphic developmental environment, for the measuring and analysis of data.
|
|
|
MathScript in LabVIEW
Selinger, Michal ; Keprt, Jiří (referee) ; Čejka, Miloslav (advisor)
SELINGER, M. MathScript in LabVIEW. Brno: Brno University of Technology, The Faculty of Electrical Engineering and Communication, 2008. 92 pages. Supervisor Ing. Miloslav Čejka, CSc. The main goal of this Thesis is to examine the portability of the m-scripts between The National Instruments LabVIEW MathScript and The MathWorks MATLAB development programs. The Thesis deals with function differences execution speeds and giving overview of using The National Instruments LabVIEW MathScript programme.
|
|
|
JAVA- and LABVIEW-based virtual laboratory
Bugla, Marek ; Malý, Jan (referee) ; Pfeifer, Václav (advisor)
Dielektrické materiály jsou použivány v elektronice i v elektrotechnice. Jako jejich základní vlastnost může považovat změnu jejich charakteristik během jejich životnosti. Změny jsou způsobeny namáhaním materiálu vyvolané elektrickými či teplotími vlivy. Možnost jak určit průběh jejich charakteristik v závislosti na čase je měření proudu během aplikování elektrického napětí na materiál. Tyto experimenty vědci z LEMD provaděli ručně, tento postup ale není přílíš učinný pro vysokofrekvenční signály nebo pro experimenty s dlouhou periodou. Hlavním cílem této práce bylo vytvořit aplikaci v LabVIEW k ovládaní měřícího přístroje Keithley (generátor napětí) a k automatickému získavání měřených hodnot v pikoampérech. Tato aplikace nabízí uživateli různé funkce: - Zadání vystupního napětí. - Vyběr typu průběhu. - Definování délky periody. - Ovládaní přístroje. - Měření proudu, ukládaní dat do souboru vhodného pro jiné aplikace (textový soubor). - Analýzu naměřených dat.
|
|
|
Measurement of the blood pressure using LabView
Slezák, Pavel ; Chmelař, Milan (referee) ; Kolář, Radim (advisor)
This thesis deals with the design of system for blood pressure measurement. The system consists of microphone, amplifier and real time acquisition program using LabView. For determining systolic and diastolic blood pressure origin and ending of Korotkov's sounds is used. The algorithm for this detection is based on bandpass filtering and thresholding also implemented in LabView. As a result of this work, the measured sounds are presented and whole system is described in detail. In conclusion advantages and disadvantages of method are resumed.
|
guest ::
