|
|
The Apartment House in Žilina
Baculak, Ladislav ; Vacenovská, Veronika (referee) ; Šuhajdová, Eva (advisor)
Bachelor thesis is a project of a residential building in Žilina. The apartment house is designed as a two-story house, without basement. The building is designed as an object with twelve flats. The house has a flat roof. The masonry is made up of the Porotherm system. The bearing interior walls are made from, the Porotherm system. The partitions are also made up of the Porotherm system. Main entrance in the building is situated to the north. On first floor are technical place, storage units, room for social life and library is on the second floor. The first floor also includes a main entrance to the object, staircase and two, two-room flats and four one-room flats. On the second floor above there are two two-room flats and four one-room flats. The facade will be white with design straps. The overall architectural and building solution is designed in accordance to the surroundings of the building. Project includes technical, thermal, acoustic, light check.
|
|
|
Riverside house
Daňová, Veronika ; Poláš, Michal (referee) ; Palaščák, Michal (advisor)
The reconciled territory is situated on the western bank of the Svitavy River along Masná Street. Approximate distance to the center is circa 10 minutes. In the area which was used to abattior , most of it´s part is unused and unbuilt. The parcels are located in the industrial part of Brno. The aim of our urban design was to revive the area near the industrial zone and to add objects with function of services and housing that are missing here. The main objective is to connect the river with the city and to use its potential. The block of flats is designed as an end house. On the southern side there is a stairway that connects the pedestrian zone and the riverside. The facade facing the river is predominantly glazed and provides more view of the river and more interior lights.
|
|
|
The load bearing structure of multi-storey reinforced concrete builidng
Burda, Patrik ; Švaříčková, Ivana (referee) ; Šimůnek, Petr (advisor)
The diploma thesis is focused on design on loadbearing reinforced concrete structure of multi-storey apartment building with shops and offices on the ground floor and underground garage. The thesis consists of the analysis and design of ceiling slabs above underground floor, supporting columns and the beam under the underground floor ceiling slab. Calculation 3D model was created to determine internal forces. All structures are designed according to EC2, ČSN EN 1992-1-1. The thesis includes elaboration of static calculation, shape drawings, drawings of reinforcement of solved structures. The rest of the project part are not analysed.
|
|
|
Implementation of the roofing phase of a residential building in Nové Sady
Balko, Dávid ; Venkrbec, Václav (referee) ; Novotný, Michal (advisor)
The bachelor thesis deals with realization of a roofing construction of a apartment block in Nové Sady. This thesis deals with the version of a warm flat roof. For the given version is handled the consideration of transportation itinerary, itemized budget with bill of quantities, technological prescription, technological documentation of building site equipment, time schedule, machine assembly, control and test plan, safety and health precautions, the cost comparison of flat roof area, drawing of flat roof.
|
|
|
Residential House in Gbely
Masaryk, Andrej ; Balúch, Tomáš (referee) ; Pěnčík, Jan (advisor)
The bachelor thesis is the project of the residential house in Gbely. The residential house is project as a four–storeyed house with one basement. The building is designed as object with twelve flats. The house has flat roof. The above grade masonry is created by Ytong system. The bearing walls in basement is created by Prefa BTB system, interior grade masonry is created by Ytong system. The partitions are created by Ytong system too. The main building entrance is situated to north–east side. In the basement, there are technical places, cellar cubible for units of flats and places for all residents. The first elevated floor is content of main entrance to the object, stairway and four two-roomed flats. On the second floor, there are two two-roomed flats and two three-roomed flats. On the third and fourth floor, there are one four-roomed flat and one five-roomed flat. The foreside of exterior walls will be white. General architectonical and structural solution created harmony with neighbourhood. The project contains technical, thermal and acoustic appraisal forms.
|
|
|
Optimization of Flat House Heating
Fodor, Ján ; Baláš, Marek (referee) ; Lisý, Martin (advisor)
This diploma thesis deals with the supply of heat in a particular block of flats in Brno. It deals with supply for heating and for hot water heating. The introduction gives information about the considerated building and also generally, but especially with regard to the current situation with consumption and heat supply. Subsequently, the thesis describes the individual possibilities of obtaining heat. There are mentioned classical heat sources as gas boilers, but also less commonly used as co-generating units or solar collectors. Furthermore, the work is calculating from the technical and economic point of view for heating options chosen by the investor. Finally, the work compares the options from viewpoint of benefits, budgets and returns of possible investments.
|
|
|
Residential house with commercial space
Pevný, Tomáš ; Pospíšil, Jaroslav (referee) ; Šuhajdová, Eva (advisor)
The subject of this thesis is to work out the project documentation for a residential building with commercial spaces in cadastral area of Trenčianske Stankovce, part Malé Stankovce. Residential building with commercial spaces is divided into two architecturally connected units. Residential building consists of one underground and three floors. Commercial spaces are designed as a fitness center with the underground floor. The floor plan of this complex is designed in the shape of a letter V. Construction system is longitudinal, wall made. Vertical supporting structures of the house are mainly made by the system POROTHERM. Other vertical and horizontal structures are made of reinforced concrete. In the commercial part of the project there are horizontal structures designed from prestressed ceiling panels SPIROLL. The roof of the residential building is designed as a single-shell flat roof. The roof above the commercial spaces is made as single-shell flat extensive vegetative roof. The drawing part is made with the AutoCAD software.
|
|
|
Residential Building
Melo, Jaroslav ; Spáčil, Miroslav (referee) ; Brukner, Bohuslav (advisor)
Diploma thesis solves the new building in Nitra. The building is located on Kmeťová street. The building has four floors above ground and one underground and the Garage. 1st floor is clinic. Other floors are for apartments .. The structural system is a monolithic reinforced concrete and brick. The building is covered with a flat roof. Foundation structure consists of reinforced concrete block.
|
|
| |
|
| |
guest ::
