|
|
Analysis of dynamic load from induction machine current signature
Pavláček, Jan ; Ondrůšek, Čestmír (referee) ; Huzlík, Rostislav (advisor)
This thesis focuses on the analysis of the dynamic behavior of the load from the measurement of stator currents of induction motor. Work is sorted from basic engine failures equations, mathematical models, types of signal processing, simulation and measurement. The practical part deals with the design of the motor model in Matlab Simulink, the simulated and the measurement of the pump BETA 12 YC On the Department of Fluid Engineering Victor Kaplan. Use appropriate types of signal processing evaluate the results. The aim of this work is to analyze the dynamic changes of the load.
|
|
|
Interconnects modelling for signals transmission
Fabián, Martin ; Petržela, Jiří (referee) ; Brančík, Lubomír (advisor)
In this work, there is solution for problem about signal itegrity and problems that causes raising frequence in circuits and machineries. There is describe interconnect analysis of models, which enable transfer of signals in mixed analog – digital circuits and a different between the analyse of an time domain and an s-domain. Next, there are described three methods of the calculation homogenous transmission line.The first method is constructed on mathematic description of transmission line. The second method uses cascade connection and T networks to the simulation model of the homogenous transmission line. The last one is constructed on the moment matching in use of state variables. These methods uses numerical inversion of Laplace transforms and these methods are constructed in programming language Matlab. Its results with the confrontation is described in the ending.
|
|
|
Substituting circuit of an induction machine
Běloušek, Radim ; Cipín, Radoslav (referee) ; Patočka, Miroslav (advisor)
Although induction motors are the simplest and most working reliability machines, is the identification of the parameters of their substituting circuit very difficult. There is solved the identification of the parameters of the substituting circuit in the T-network and ? –network in this work. The work also includes the proposal of magnetic circuit of the induction motor, the calculation of magnetizing and leakage inductances and resistances of the machine. The conclusion of the work is devoted to the sensitivity analysis of current and torque characteristics of induction motor upon the change of the single parameters of the substituting circuit.
|
|
|
Single-Phase Induction Motor Calculation
Vácha, Pavel ; Vítek, Ondřej (referee) ; Hájek, Vítězslav (advisor)
The master´s thesis deal with the thesis of a single-phase induction motor that is more and more used all over the world. Its aim is assembling the information about this type of motor and its calculation. The content of the first part is the theoretical analysis of a single-phase induction motor and acquirement ways of the stroke moment. Than the work contains a project of basic schema of the single-phase induction motor with an auxiliary phase. The practical part is devoted to an elaboration of demonstration example of the single-phase induction motor with concrete parameters calculation, its method was projected before. Than there is practising successived measuring on the motor of the same parameters made firm EMP s.r.o. Slavkov by Brno in this part. In the conclusion there is the evaluation of the whole process with reached results.
|
|
|
Dynamic simulation of DC motor using FEM
Gottwald, Michal ; Huzlík, Rostislav (referee) ; Vítek, Ondřej (advisor)
My diploma thesis deals with a specific dynamic model of DC motor with the parameters obtained from the calculation and from the program using the finite element method. It shows how much accurate results can be achieved in the model, if you use only the values which can be measured, recorded and calculated on the engine. This thesis contens three parts. First part describes the structure and function of DC motor and the basic principle and the use of FEM. Next is calculation analytical and numerical parameters. The search parameters include torque, resistance and inductance of armature winding, resistance and inductance of excitation windings. The last part is dedicated to creating a dynamic model. Results from the dynamic model and measured values are compared in the conclusion of my thesis.
|
|
|
Tyre Mathematical Models
Rubíček, Pavel ; Blaťák, Ondřej (referee) ; Hejtmánek, Petr (advisor)
Today the tire is an integral part of the vehicle. During its development is used in various methods. This publication deals with some of them. In her research is necessary to know its features and design solutions. Basic tire structure is described in the first part. These findings are then fit to the other chapters. In the second part there are examples of several tire models in the form of mathematical equations. These equations are used to determine the force and moment loads acting on the tire. The resulting load may aid in the design of new types of tires. The last part describes how to use mathematical models to calculate and here are other methods how else can it gets information about the load on the tire. There is a list of organizations that deal with simulations and tests.
|
|
|
Equipment and station for engine output testing
Matajsz, Petr ; Svída, David (referee) ; Beran, Martin (advisor)
This bachelor thesis deals with the retrieval of current facilities and workplaces for measuring performance parameters of internal combustion engines. Major focus is placed on the division of each device for measuring performance based on their method of functioning, as well as on equipment workplaces where these facilities are implemented.
|
|
|
Grapple saw for loading crane
Koumar, Martin ; Pokorný, Přemysl (referee) ; Kašpárek, Jaroslav (advisor)
Aim was create "proposal grapple saw on round timber and sawn wood for loading hydraulic crane" of submitted work. Submission contained these entry conditions: maximum outreach, lifting moment, allowed load at setout 4m, other characteristics according to elect tractor trailer with loading crane those category. Estimate sectional surface grab and proposal basic proportions grapple saw was processed at first. Model was solved of grapple saw further. Check calculation of part of grapple saw were next step largely and option some components. Detailed assembly drawing was processed of grapple saw, drawings of parts and item list. Option quality materials and their ovenware were effected for individual single parts grapple saw also.
|
|
|
Strain, stress and strength analysis of the frame construction.
Hrubý, Jaroslav ; Vlk, Miloš (referee) ; Vrbka, Jan (advisor)
This work deals with the stress and strain calculation as well as with the safety evaluation at the plane (2-D) frame loaded by the individual force F. The aim of this work is not acquiring the use of cutting-edge computer programs to determine the stress and deformation, but to learn how to use practically the basic calculation methods being taught at the subject Strength of materials to get practical experience with the application of these calculation methods.
|
|
|
Static and modal analysis of bridge structure
Turková, Martina ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
The bachelor thesis is based on structural analysis calculated by Dopravoprojekt Ostrava company that was used for dimensioning of the oblique bridge structure No. 433 27-3, in Popůvky, Přerov district. The beam model which is part of static calculation and is designed by Nexis 32 software, served as ground. The aim of the thesis was to construct an identical beam model, specifying boardwall model and perform static and modal analysis. All calculation were done in Dlubal RFEM 5.01 software.
|
guest ::
