National Repository of Grey Literature 731 records found  beginprevious51 - 60nextend  jump to record: Search took 0.00 seconds. 
Monolithic concrete building at sewerage plant
Klimeš, Petr ; Bažant, Zdeněk (referee) ; Strnad, Jiří (advisor)
Bachelor's thesis deals with design of monolithic concrete construction with a timber roof truss for a device of sewerage plant. This construction consists of these elements- strip foundation, walls with lintels, slab and timber trusses. This thesis contains static analysis of the component parts and their drawing documentation.
Overpass bridge across the highway
Černý, Pavel ; Šopík,, Leonard (referee) ; Nečas, Radim (advisor)
The topic of this thesis is detailed design of the supporting structure of a bridge. Three variants are designed. The structure is designed as a single beam bridge of 6 spans. The calculation of load efects make in software MidasCivil 2019 and Scia Engineer 18.1. The subject of the expertise of the structure is service limit state and ultimate limit state. For evaluation of cross sections is used MS Excel. Both design and relevant drawing documentation of the bridge deck and substructure. The design and assessment are according to the europien standards.
Connecting rod of four-stroke spark-ignition engine
Kuzník, Bořek ; Svída, David (referee) ; Drápal, Lubomír (advisor)
The purpose of this thesis is to carry out a brief research on the connecting rods currently used in cars, to design a new connecting rod, to create kinetic and dynamic model of the crank mechanism, and finally to conduct its strength analysis. Design documentation of the proposed solution is also included.
Overhead travelling crane 125t
Peprník, Pavel ; Zimola, Lubomír (referee) ; Pokorný, Přemysl (advisor)
This diploma thesis deals with the assessment of drafted steel construction of overhead travelling crane by using finite element method. The crane’s lifting capacity is 125t/32t. It is going to be placed in hall of Slovácké strojírny, a. s. in Uherský Brod. Span of the crane is 25.8 meters, wheelbase is 6.7 meters and lifting height is 17 meters. My work contains analysis and assessment of crane construction with a load of fatigue according to ČSN 27 0103.
Static analysis of suspension bridge variants
Zavřelová, Michaela ; Martinásek, Josef (referee) ; Vlk, Zbyněk (advisor)
The bachelor's thesis deals with the static analysis of individual models of suspension footbridges. A manual calculation of the cable was processed. The actual position of the cable was determined by calculation. The manual calculation was compared with the RFEM calculation program. Furthermore, the models were loaded with manually calculated loads. The bachelor's thesis deals with the influence of pylon deflection on the global deformations of cable and bridge deck during individual load cases and combinations. For one of the models, the optimization of construction was processed.
Wing system design of competition aircraft
Mahdal, Vít ; Hájek, Tomáš (referee) ; Katrňák, Tomáš (advisor)
This bachelor’s thesis deals with the wing system design of competition aircraft. The thesis consists of five main parts. The first part is an introduction to the competition – Air Cargo Challenge, and the mission of UAV. The second part details the compilation of flight envelope and loads acting on the aircraft. Part three describes stress analysis of the old fabric method of wing construction. Part four of the thesis gives suggestions of a new wing system design, and its stress analysis. The final part of this bachelor’s thesis describes the advantages and disadvantages of the new system design, and compares them to the old version.
Analysis of behaviour of reinforced concrete slab
Kubínek, Michal ; Bažant, Zdeněk (referee) ; Zich, Miloš (advisor)
Bachelor thesis describes the analysis of behavior of existing reinforced concrete slab, locally supprorted, ceiling in hospital including 2nd limit state. Calculation od internal forces was made by computer program SCIA Engineer. Several models were made, model with best behavior due to real construction was used for dimensioning. Each model was compared with manual calculation by equivalent frame analysis. After finding inconvenient deflection, especially due to connected construction, new design was made. Thickness of slab was increased and new design of reinforcement was made. New construction was verified for both limit states.
Static analysis of reinforced concrete floor structure of historical building
Nani, Pavel ; Bažant, Zdeněk (referee) ; Zich, Miloš (advisor)
The chief objective of my bachelor’s thesis is a design of the reinforced concrete floor structure of a historical building over 1st floor. The historical building was built in 1874. There are three floors in this building and there isn’t any underground floor. The reinforced concrete floor structure consists of the following forms of structure – a ribbed ceiling, a floor slab, a beam, a shell of vault and a staircase. The ribbed ceiling is made from a lost formwork of the VELOX firm. The set reinforced concrete floor structures are according to ČSN EN 1992-1-1.
Agricultural Building
Németh, Matěj ; Barnat, Jan (referee) ; Pilgr, Milan (advisor)
The aim of this thesis was to design and assess of steel structure primarily use for deposit of agricultural machinery alternatively used as associated storage space. Location of object is situated in village of Uhřínovice near Voděrady. Fundamental dimensions of the floor plan are 18 × 48 meters with the height in the top of the gable roof 7,5 meters. The transversal bond is two-hinged frame with span of 18 meters. Height of the columns is 5,2 meters. The main frames are orderly placed with 6 meters space in between them. Cladding is made from multi-layered composite panel system made by Kingspan. Spatial rigidity of the structure in transversal way is supported by main frames and in the longitudinal way is being supported by sway bracing. Used material is construction steel S235.
Static analysis of steel footbridge
Mareková, Adela ; Martinásek, Josef (referee) ; Vlk, Zbyněk (advisor)
The subject of the bachelor thesis is static analysis of a steel footbridge. Two different models of this structure are created in RFEM 5.16 software. The first model consists only of the upper part of the structure, the second model includes also the bottom part – columns. The load is calculated manually and applied on both models in the same way. RFEM software was also used for performing the calculation. The results from models are compared between each other and ultimate limit state assessment is carried out.

National Repository of Grey Literature : 731 records found   beginprevious51 - 60nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.