|
|
Autosalon
Bajer, Radim ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
This master thesis is focused on elaboration of project documentation for constructing autosalon in Žďár nad Sázavou. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #6167/2. Both plat sis parts of cadastral area of Žďár nad Sázavou. There are all needed engineering netwoeks nearby. Object is divided on two functional parts, which are operationally and constructionally connected. First part is exhibition and representatice hall, which are capacity of 7 exhibited vehicles. Other partis formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Second part is service for personal and light commercial vehicles with four working stations. Construction is designed reinforced concrete columnar structural system. Plan dimension autosalon is 31,06x22,6m. Plan dimension autoservise is 30,74x18,84m. The cladding autosalon is designed of ceramic tile 250mm. The cladding autoservis is designed of sandwich panel. Roof of building accross the surface is flat roof. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hal lis more than 50% glazed. Parts of autosalon and autoservise are designed as sigle storey objects, while administrative part is designed as a two.
|
|
|
Motorshow
Bár, Radek ; Vémola, Josef (referee) ; Utíkalová, Ivana (advisor)
This master thesis is focused on elaboration of project documentation for constructing autosalon in Kopřivnice. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #419/2 and partly on plat #419/27. Both plats are parts of cadastral area of Kopřivnice. There are all needed engineering networks nearby. Object is divided on three functional parts, which are operationally and constructionally connected. First part is exhibition and representative hall, with capacity of 11 exhibited vehicles. Second part is formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Third part is service for personal and light commercial vehicles with three working stations. Construction is designed partially reinforced concrete columnar structural system and partially of brick longitudinal structural system. The biggest plan dimension of building is 34.3x35.15m. The cladding is designed of sandwich blocks LIVETHERM tl.400mm. Roof of building accross the surface is flat roof with several height levels. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hall is more than 50% glazed. Parts of service and autosalon are designed as sigle storey objects, while administrative part is designed as a two.
|
|
| |
|
|
Proposal of a Company Expansion by a Fuel and Oil Station
Holcmanová, Eva ; Ing.Jaroslav Vala (referee) ; Mikulec, Luděk (advisor)
The aim of this diploma thesis is to draw up a business plan regarding an extension of an existing car repair service by adding a public fuel filling station to it. The public fuel filling station will be built directly within the area of the existing car repair service located in the village of Jemnice, in the district of Žďár nad Sázavou. The theoretical part generally describes the business activity, possible forms of business and individual analyses used in this diploma thesis. The second part briefly describes the chosen company, for which the above mentioned draft of the businnes plan is intended. The last part of the diploma thesis presents the actual construction plan of the public fuel filling station based on the elaborated analyses, including the time schedule of the execution.
|
|
|
Evaluation of the Financial Situation in the Firm and Proposals to its Improvement
Dundáčková, Monika ; Štěnička, Miroslav (referee) ; Žižlavský, Ondřej (advisor)
This thesis is aimed on evaluation of the financial situation of a concrete company. In the first part, there is a profile of the company, and a basic performance analysis of internal and external factors which influence the company. The second part of thesis is an explanation of financial analysis, the principles of which are applied. In the third part, data gathered about the company is analysed and compared with a competitor. The final part of the work describes proposals to improve the financial situation of the analysed company.
|
|
|
Garage with Fuel Station
Borkesz, Michael ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
Bachelor thesis presents the structural design of a load bearing steel structure of garage with roof construction of adjoining fuel station. The object is located in periphery area of Uherske Hradiste city, near Jarosov district. The ground plan dimensions are: 36 x 32 meters garage hall; 20 x 20 meters fuel station roofing. Heights of both construction tops are same – 10 meters above the surface. As the main material supporting elements was designed steel S355. The main supporting structure compose of trusses, which are hinged supported by columns. The roof deck is heat insulated, supported by purlins. The wall deck is simillar to roof deck, except of the front wall, which is partly composed of glass casing. At the both sides of garage hall are designed gates for vehicles. The roof deck of fuel station roof construction composes from one single trapezoidal sheet, also supported by purlins. The work contains structural design of individual elements, including mutual joints and anchoring. Calculations are performed according to standards of EN.
|
|
|
Analysis of a Business Model – Ensuring of Vehicle and Emission Testing of Cars
Pechanec, Václav ; Hartman, Ladislav (advisor) ; Svobodová, Ivana (referee)
The aim of this thesis is to analyse a business model that is defined in two ways: company client and company company. The main point is ensuring of vehicle and emission testing of cars. In the first case, car owners are the clients, and in the second case, car repair shops are the clients. The theoretical part includes definitions of terms and descriptions of individual analyses and serves as a basis for the practical part where we can find internal and external analyses as well as descriptions of both forms of the business model. The outcomes of the analyses are then used to create a SWOT matrix. The conclusion of the thesis contains an evaluation of the data and results of all analyses, which can present a useful tool when deciding about any further development of the business idea.
|
|
| |
|
| |
|
|
Business plan
Čtvrtečka, Lukáš ; Tyll, Ladislav (advisor) ; Krause, Josef (referee)
The Master's Thesis is divided into two parts. The first part is represented by theoretical part. Theoretical part is focused on business plan, automotive industry and legal forms of business in the Czech Republic. There are described requirements for the structure of a business plan and also recommendation on the writing a business plan. Practical part is based on the theoretical part and is represented by the business plan of a car repair service specializing in electronics and car security. We can also find competitor analysis, environmental analysis and prediction of output. The SWOT analysis is contained here as well.
|
guest ::
