|
|
Ball Sorting Manipulator Driven by PLC
Mareček, Petr ; Matoušek, Radomil (referee) ; Knispel, Lukáš (advisor)
This thesis deals with using PLC (Programmable Logic Controler) for sorting colored balls using the color sensor. Theoretical part also describes principle of operation elements ball-sorting manipulator and presents the types of programming languages. Practical part describes the construction of the mechanism created in software Autodesk Inventor and solution of the electronic compoments, circuits. Finally, introduces the reader programming in ANSI C and the software Bernecker&Rainer Automation Studio.
|
|
|
Design of control system of pneumatic manipulator
Roun, Jiří ; Bradáč, František (referee) ; Vetiška, Jan (advisor)
This bachelor thesis is about the design of the control system for the pneumatic manipulator. Initial research describe the current possibilities of pneumatic products for driving and positioning of pneumatic assemblies. The practical part of this thesis describes the connection of hardware with PLC terminals and the design of software for controlling the manipulator. At the end of the thesis is testing part realized with designed software and measuring software.
|
|
|
Design of mechanical, electrical construction and software equipment of autonomous cell "Soda maker" for Industry 4.0 testbed.
Dvorský, Petr ; Baštán, Ondřej (referee) ; Kaczmarczyk, Václav (advisor)
The objectives of this bachelor thesis are design and realization of an autonomous cell for soda production for the testbed of Industry 4.0. First, basic construction principles of the autonomous cell are outlined. Then, the mechanical design, the hydro pneumatic system design, the electrical design and the software design are described. The drawing of the mechanical construction of the cell was devised using CAD NX 12 (Siemens PLM software). Most of the 3D printed parts were printed on 3D printer Tarantula. Hydro-pneumatic system was designed in SMC PeuDraw 2.8 for maximal working pressure of 8.2 Bar. Electrical documentation was created in electrical CAD software WSCAD. For control and communication, the autonomous cell is equipped with PLC SIMATIC S7-1200 (CPU 1214C DC/DC/DC), HMI panel (SIMATIC HMI KPT400 BASIC) and Linksys SD205 switch. The source code for control PLC and HMI was designed in TIA Portal software.
|
|
|
Remote training station
Kučera, Tomáš ; Jirgl, Miroslav (referee) ; Štohl, Radek (advisor)
The purpose of the thesis is design and contruction of remote training station for training with Schneider Electric products. Its purpose is to introduce company PLCs, familirize user with configuring variable speed drives and servo drives and prezenting Machine Advisor and EcoStruxure Augmented Operator Advisor online servives The begining is dedicated to introduction to company and a range of its products in the field of industrial automation. In second chapter, I select components for building training station. Third chapter is dedicated to assembly of station. In fourth chaper I describe programing of individual elements and example.
|
|
|
Algorithm for leakage detection
Kratochvíl, Adam ; Šedivá, Soňa (referee) ; Pikula, Stanislav (advisor)
The thesis deals with the presentation of an overview of the methods used for leak detection set by technical standards. Following the analysis of the pressure records from the pipeline, a new method is proposed, which is based on existing methods and uses the determination of the direction of arrival of the wave directly at the measurement station. The proposed concept was subsequently developed in Matlab, where the ability to detect was also verified. The whole algorithm was then implemented in programmable logic controllers and a suitable communication between them was designed. The entire solution was then tested in terms of functionality.
|
|
|
Control system for equipment using renewable energy sources
Novotný, Jan ; Bradáč, Zdeněk (referee) ; Benešl, Tomáš (advisor)
The work deals with design of power and control electronics for water micro source in island network. In the general part the readers are acquaints with the issue of renewable energy sources and describes commercially produced micro sources. The practical part deals with the design of its own control system and power electronics using its own control system or PLC for water micro source. The microcontrollers were used for the implementation of the control system, for which the program part was created.
|
|
|
Cartesian manipulator
Bačkovský, Tomáš ; Arm, Jakub (referee) ; Benešl, Tomáš (advisor)
This bachelor thesis deal with the design of the control of an industrial two-axis manipulator, which will serve as a palletizer of egg spacers. Part of the work is the theory and selection of actuators, description of individual parts of the manipulator. The practical part deals deals with designing of complete electrical documentation, completion of control software and visualization of the panel. Finally, the individual parts are tested on a real manipulator.
|
|
|
Milling machine
Homola, Stanislav ; Vetiška, Jan (referee) ; Marada, Tomáš (advisor)
This goal of the diploma thesis is to design, to construct and write control program for CNC milling machine designed for machining aluminum, wood and plastic. Entire structure of machine is designed and made of steel. The main table consists of an aluminum plate and aluminum structural profiles. Spindle of milling machine is a high speed motor from ATAS a.s. company. Milling machine is controlled by the program made in TwinCAT environment from Beckhoff Automation GmbH & Co. KG.
|
|
|
Wastewater treatment plant testbed controlled by PLC
Kopáč, Ondřej ; Blažek, Petr (referee) ; Pospíšil, Ondřej (advisor)
This master thesis deals with the design of a wastewater treatment plant, which will be controlled by a PLC. The theoretical part describes the types of wastewater and sewage systems that are important in the design of wastewater treatment plants. The thesis also describes programmable logic controllers, theirs programming languages, SCADA (Supervisory Control And Data Acquisition) systems and automation.The thesis also deals with theoretical description of wastewater treatment plants, their functions and security. Next part describes the design of the wastewater treatment plant. The last part of the thesis describes implementation of the wastewater treatment plant controlled by a PLC.
|
|
| |
guest ::
