|
|
Laboratory device with temperature control
Telecký, Jakub ; Škrabánek, Pavel (referee) ; Němec, Zdeněk (advisor)
This work deals with regulation and procedures that can be used for this. The theoretical part therefore presents the basic concepts of automation and controllers. The main part is the practical part. The purchased system consists of a regulated system, which must be set up correctly. Using system identification and known procedures, sample examples of how to best set the controller are compiled. The result is a sample laboratory task that automation students can try and gain experience with methods of setting up the controller.
|
|
|
Preparation of laboratory exercise for school subject Ecology in Manufacturing
Balcárková, Lucie ; Vaněk, Jiří (referee) ; Bača, Petr (advisor)
The thesis deals with the design of laboratory task on selected topics and brings together theoretical knowledge needed to understand the principle and function of the proposed system. The theoretical design is elaborated from the point of view of physical principles, physical feasibility, electronic difficulty, user service, correctness of the system, and its economic aspect. Furthermore, the practical implementation of the chosen task is disscussed in detail, based on the collected theoretical knowledge, a comparison of the available options and the results of the measurements made.
|
|
|
Analogue comparators for educational laboratory purposes
Šafařík, Daniel ; Petržela, Jiří (referee) ; Domanský, Ondřej (advisor)
The goal of this bachelor thesis is to design complete solution for assembling of laboratory task on comparators topic. This thesis contains an introduction on comparators and a subsequent analysis of some of their basic functions. Thesis also contains design and simulation of the individual parts in the OrCAD program, from which the final product for laboratory task is constructed. There is also design of the printed circuit board along with its measurements. Another part is the process of designing and verifying its functionality. A sample protocol is prepared for the laboratory task.
|
|
|
A laboratory task to verify the properties of audio devices
Staňková, Karolína ; Marcoň, Petr (referee) ; Mikulka, Jan (advisor)
The aim of this thesis is familiarization with the parameters of an audio device and their measurements according to the standards (AES17-2018 and ČSN EN 60268-3). A laboratory task for the Measurement in Audio Engineering course is designed, based on the study of the standards. The first part of the thesis deals with detailed analysis of the measurements of different parameters of audio device. The described procedures are consequently employed to design the laboratory task. The second part of this thesis is dedicated to design the laboratory task. The automatized system based on HP VEE platform was developed to provide the multiple measurement. The attachments of this thesis contain the student’s manual for the laboratory task, the sample protocol, the testing measurement manual and the sample protocol for the testing measurement.
|
|
|
CIP Safety
Šmoldas, Michal ; Stibor, Karel (referee) ; Štohl, Radek (advisor)
This master´s thesis deals with the analysis of CIP technology and the creation of laboratory tasks from components based on this technology. The aim of the thesis is to create a literary research on CIP technology and its individual extensions focusing on CIP Safety. Further, a functional laboratory panel is assembled from the available components in the FEKT VUT Brno laboratory supporting this technology CIP Safety, specifying the assignment of the laboratory task. Functionality of the panel has been verified by the SW solution of the laboratory task with visualization and control of the virtual production line. The result of the work is literary research on CIP technology, functional laboratory panel, specification of assignment of laboratory task and SW solution of task with visualization and control of virtual production line.
|
|
| |
|
|
Ethernet for metallic cables
Víteček, Aleš ; Člupek, Vlastimil (referee) ; Zeman, Václav (advisor)
The bachelor thesis "Ethernet for Metallic Cables" deals with the analysis of Ethernet technology, the most used technology for running computer networks. Specifically, it is focused on transmission via metallic line. The aim of this thesis is description of technology, research of the latest Ethernet standards, including the latest categories of metallic lines. Laboratory tasks and its implementation are described below. This thesis also contains a detailed lab instructions and reference values.
|
|
|
Gloves with motion sensors
Findejsová, Anna ; Cicková, Pavlína (referee) ; Janoušek, Oto (advisor)
Bachelors thesis deals with design and realization of a glove with flex sensors. This thesis summarizes problematics of resistive sensors, describes their principles and using. Then deals with brief upper limb anatomy and degrees of freedom. Theoretical base is stated in chapter one and then used in chapters two, three and four, that describe the design and realization of hardware and software. The principle is based on capturing the flection of the fingers by using flex sensors connected to the Arduino development board and their visualization. The output of this thesis is a laboratory task for teaching senzorics, which is designed for using one flex sensor.
|
|
|
Design and realization of a new laboratory exercise with PLC B&R Automation
Cejpek, Zdeněk ; Němec, Zdeněk (referee) ; Lang, Stanislav (advisor)
This bachelor thesis is concerned with designing of a laboratory task primary dedicated for the course „Advanced control methods“, which for the education uses the instruments of company B&R Automation. From possible aproaches chooses modeling of dynamic systems using analog electrical circuits. Those circuits are realized in modular manner, in order to allow building models of various systems. The thesis also includes a desing of proper casing, which simplifies the manipulation by building of the systems. Using designed prototype modules, a model of a separately excited DC motor was built. This model is used for realization of the laboratory task, for which is provided a short manual including some basic program for Automation Studio. The thesis also briefly introduces the company B&R, it´s products and a PLC configuration used in courses „Advanced control methods“.
|
|
|
Laboratory scenarios for comparison of protocols allowing transmission of web pages
Moučka, Martin ; Grenar, David (referee) ; Jeřábek, Jan (advisor)
This diploma thesis focuses on theoretical and practical comparison of webpage transport protocols such as HTTP/HTTPS (Hypertext Transfer Protocol) v1.1, SPDY, HTTP/2 and QUIC using UDP (User Datagram Protocol), TCP (Transmission Control Protocol) and SCTP (Stream Control Transmission Protocol) as transport protocols. This work also contains design and manual for practical laboratory tasks on which can students verify theoretical assumptions. These tasks compares protocols in different conditions such as packet loss, latency and jitter.
|
guest ::
