|
|
Blind Image Deconvolution in STEM mode of Electron Microscope
Valterová, Eva ; Walek, Petr (referee) ; Potočňák, Tomáš (advisor)
Slepá dekonvoluce je metoda, při které je rozptylová funkce a skutečný obraz rekonstruován zároveň. Cílem této práce je představit různé metody slepé dekonvoluce a najít optimální metodu rekonstrukce původního obrazu a rozptylové funkce. Jako nejvhodnější metoda slepé dekonvoluce byl zvolen algoritmus střídavé minimalizace, který byl upraven a testován. Vlastnosti navrženého algoritmu byly testovány na uměle degradovaných datech a na reálných datech pořízených skenovacím transmisním elektronovým mikroskopem. Účinnost algoritmu byla hodnocena hned několika hodnotícími kritérii. Byla zjištěna omezení algoritmu a tím specifikováno jeho využití.
|
|
|
Precise Audio Amplifier for Quality Listening
Janošík, Lukáš ; Šotner, Roman (referee) ; Kratochvíl, Tomáš (advisor)
This bachelor thesis deals with a design of quality audio preamplifier designed for high quality production. The typology of whole design emphasizes very important transmission properties, i.e. high signal-to-noise ratio, high separation of channel, low distortion, The content of the semestral thesis is an symetrical input, relay input switch, 5 band equalizer with bypass and symetrical output with active line driver.
|
|
|
Basic measurement of dynamic properties of bipolar and unipolar transistors
Lang, Radek ; Šotner, Roman (referee) ; Dřínovský, Jiří (advisor)
The aim of this bachelor’s thesis is to describe the dynamic parameters of semiconductor devices. The other aim is to build a measuring workplace, on which is possible to carry out measurement of dynamic properties of bipolar and unipolar transistors. The bachelors’s thesis also solves a design and a production of an universal product, on which measurements are carried out. Individual measurement is automated and individual devices are connected to the product and results are controlled by computer analysis.
|
|
|
The influence of operational amplifier topology on audiosignal quality
Rozkopal, Tomáš ; Kledrowetz, Vilém (referee) ; Háze, Jiří (advisor)
The thesis describes different between any signal and audio signal from the used amplifier´s quality point of view. There are mentioned ways of origin of distortions and their effect on the audio signal quality. There is also described in detail the principal of operational amplifier, it´s circuit realization and ways to improve the circuit topology in order to reach the best qualities. Choice of parts used for discreet realization of operational amplifier is consulted. Last but not least the thesis contents the practical part, stating the reasons for realization of operational amplifiers from discreet parts and also describing two most commonly used topologies of operational amplifiers. Their discreet version is designed and there are compared the different between the manufacturer’s data and the data measured during the simulation.
|
|
|
Blind Image Deconvolution of Electron Microscopy Images
Schlorová, Hana ; Odstrčilík, Jan (referee) ; Walek, Petr (advisor)
V posledních letech se metody slepé dekonvoluce rozšířily do celé řady technických a vědních oborů zejména, když nejsou již limitovány výpočetně. Techniky zpracování signálu založené na slepé dekonvoluci slibují možnosti zlepšení kvality výsledků dosažených zobrazením pomocí elektronového mikroskopu. Hlavním úkolem této práce je formulování problému slepé dekonvoluce obrazů z elektronového mikroskopu a hledání vhodného řešení s jeho následnou implementací a porovnáním s dostupnou funkcí Matlab Image Processing Toolboxu. Úplným cílem je tedy vytvoření algoritmu korigujícícho vady vzniklé v procesu zobrazení v programovém prostředí Matlabu. Navržený přístup je založen na regularizačních technikách slepé dekonvoluce.
|
|
|
Tube microphone preamplifier
Čacký, Adam ; Hruboš, Zdeněk (referee) ; Brančík, Lubomír (advisor)
The theme of the master´s thesis is design a microphone preamplifier which uses vacuum tube as a main amplifying element. Part of the work is theoretical assumptions for the optimal design and implementation of peripheral involvement, comparing the properties of components used and the resulting parameters of modeled device. The thesis also includes a proposal of the source unit for supplying all parts of the preamplifier. The results are accompanied by circuit simulations and laboratory measurements of the main parameters of the designed device.
|
|
|
Analog Guitar Multieffect
Zapletal, Ondřej ; Petržela, Jiří (referee) ; Staněk, Miroslav (advisor)
Presented thesis is focused on guitar effects used for sound modification produced by an electric guitar. The main aim of this thesis is an introduction into guitar effects topic and the design of selected types chosen as follows: overdrive, noise gate and delay. Final multieffect is created by these mentioned components. Another part of presented thesis is the design of source feeding the whole final multieffect. Furthermore, the design of chosen components is presented in this thesis as well as the including of control simulations and PCBs.
|
|
|
Analog Guitar Multieffect Using Tube for Signal Distortion
Kufa, Michal ; Kincl,, Zdeněk (referee) ; Staněk, Miroslav (advisor)
Presented thesis is oriented on the short survey of guitar effects functionality and the design of chosen guitar effects set embedded into one device. The first effect is related to input signal distortion using a vacuum tube, in this case the couple of double-diode tubes. Next effect is noise gate filtering parasitic artefacts included in input signal lower than set threshold level. The last realized guitar effect is chorus. Each individual effect can be controlled by footswitch. The first two sections are focused on the theory of guitar signal processing, the third section solves the whole design of chosen device, the realization and the proof of designed device functionality are described in further sections.
|
|
|
Design and construction of guitar multi-effects
Šindelář, Jindřich ; Kratochvíl, Tomáš (referee) ; Petržela, Jiří (advisor)
This thesis focuses on design of electronic circuit which combines several effects for electric guitar. These effects are switchable to achieve relatively wide range of sounds usable in different music genres. Each chapter of this text describes function and design process of single subcircuit. In the summary of this text are written up sound characters of effect in particular modes. Attachments contains the results of design needed to build a functional prototype of the whole circuit.
|
|
|
Basic measurement of dynamic properties of bipolar and unipolar transistors
Lang, Radek ; Šotner, Roman (referee) ; Dřínovský, Jiří (advisor)
The aim of this bachelor’s thesis is to describe the dynamic parameters of semiconductor devices. The other aim is to build a measuring workplace, on which is possible to carry out measurement of dynamic properties of bipolar and unipolar transistors. The bachelors’s thesis also solves a design and a production of an universal product, on which measurements are carried out. Individual measurement is automated and individual devices are connected to the product and results are controlled by computer analysis.
|
guest ::
