|
Belt conveyors - theory and design
Žáček, Petr ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor’s thesis deals about the calculation and design of belt conveyors with focusing also on the atypical design solutions. Contains the basic classification, design solutions and complex calculation of belt conveyors. Also contains an overview of producers of purchased parts and units.
|
|
Price Calculation and its Application in the Management of a Firm
Vlašínová, Petra ; Stejskalová, Irena (advisor) ; Pevná, Jana (referee)
In the thesis a general method of cost calculation as a means of determining the price has been used in a selected company. The influence of the method of cost calculation on company management has been analyzed. The thesis is focused on the water treatment company Slovácké vodárny a kanalizace a.s. I researched the most suitable method of calculating fresh water and waste water tariff for the company. I came to the conclusion that using the two-component form should bring the company higher profits than using the single-component form and these could be used to cover running and maintenance cost. I recommend using the two-component form.
|
|
Air-conditioning and ventilation of social hall
Potočník, Petr ; Pavelek, Milan (referee) ; Janotková, Eva (advisor)
The aim of this diploma thesis is to design and suggest dimensions of air conditioners for ballroom and ventilation of cafeteria, cloakrooms and sanitary rooms. Sub-goals are next heat-load calculation of air-conditioned space, psychrometric calculations for summer and winter environment conditions, design of air distribution, machinery room of air conditioning, to design and suggest dimensions of air distribution system, specification of materials and design of necessary technical drawings.
|
|
Newly-built single-family house in Rosice, rough superstructure
Kratochvílová, Erika ; Hanzelková, Martina (referee) ; Šlanhof, Jiří (advisor)
Subject of this bachelor´s thesis is solution of technological phase rough superstructure newly-built single-family house in Rosice. This thesis involves engineering report, block plan and block plan drawing, calculation of building with bill of quantities, technological regulation for selected part of the technological phase, organization of construction and site plan drawing, scheduling, desing of machine formation, testing plan and safety.
|
|
Deferred tax
Podzimková, Martina ; Rauš, Jiří (advisor) ; Strouhal, Jiří (referee)
The diploma thesis reviews the problematics of deferred tax. It presents the historical context leading to introduction of deferred tax and explains different approaches to its calculation and reporting. The thesis is focused both on the Czech accounting legislation and on IFRS (International Financial Reporting Standards). Illustrative examples are included in order to facilate the understanding of the presented concepts. The work is concluded by a practical part dealing with the usage of deferred tax in one Czech company.
|
|
The Tool for a Radial Expanding of Tubes by Liquid
Horák, Michal ; Lidmila, Zdeněk (referee) ; Peterková, Eva (advisor)
The submitted diploma thesis is focused on problematic of a radial expanding of tubes. In the first part of thesis, there is a summary of possible theoretical formulas for determining the stress-strain material parameters for biaxial bulging test of tube by liquid. Also there are showed several options for testing tools used in research abroad. The work also contains technological and control calculations for the selected test sample from the tube of steel 17 240 (1.4301). At the end of thesis, there are key points for tool design and there is also presented the proposed the test tool for a radial expanding of test sample of tube to the free space and with firmly fixed the ends of tube in the tool.
|
|
The interconnection of accounting with the corporate income tax
Kučerová, Pavlína ; Procházka, David (advisor)
The aim of this study is delimitation of inter-relationship of accounting with the corporate income tax. The study describes the procedure for determining the income tax base. I give great attention to tax expenses and non-tax expenses and their delineation in the accounting. Then I deal with the income, tax base reduction and tax calculation. The study draws attention to important changes in the Income Tax Act, which occurred in 2008 and 2009.
|
|
Valuation of damage caused by torrential rain to a house in the village of Nesovice
Kraus, Jan ; Vřešťál, Jiří (referee) ; Šmahel, Milan (advisor)
The thesis focuses on the valuation of damage caused by torrential rain to the family house in the village Nesovice. In the first part the basic terms and assessing methods are defined. In the second part, there are applied methods of appraisal of damage on the family house. There is the value of the property calculated before the insurance event. In the itemized budget, there are quantified the cost of repairs of damaged constructions and then detected current value after repairs. The aim of the thesis is to dedicate readers to the problem of assessment.
|
|
Financial analysis of Casia s.r.o.
Kult, Jakub ; Kislingerová, Eva (advisor) ; Hylmar, Jindřich (referee)
A financial analysis of Casia s.r.o. company conducted for years 2003 -- 2007. The thesis is conceived for managers (owners), who are involved in a further growth of the firm. Not only standard quantitative methods are used in the paper (percentage analysis, ratios, horizontal and vertical analysis of account statements, cash flow, working capital, economic value added and financial leverage calculation), but also methods for complex assessment of the company: Index IN05, Quick Test. A part of the work is also an intercompany and industry comparison. Proposals for improvements are defined in the conclusion.
|
|
Continuous vertical conveyor for transport the goods
Zálešák, Martin ; Bukovský, Radim (referee) ; Kašpárek, Jaroslav (advisor)
This diploma thesis deals with the existing of transportation unit products and designing of a better conceptual solution of continuous elevator with fixed section of a gravity and roller conveyor. This type of conveyor is specified mainly for the transport of boxed products from the lower floor to the another. The diploma thesis is substantiate by the proposal of assemblies machines. It includes a complete 3D design, engineering and functional solution that is supported by basic strength and the check calculations. The attachments consist of the drawings of the proposed facility.
|
guest ::
