|
Office Building
Pometlová, Eliška ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The purpose of this diploma thesis is the processing of the project documentation of office building. The object is designed as a detached building with three floors and with one basement. A collective garage is situated in the basement and office spaces are situated on the floors. The structural system of the building is reinforced concrete skeleton. The roof of the building is flat.
|
|
Steel Structure of the Office Building
Stavrovský, Jiří ; Štrba, Michal (referee) ; Hron, Lukáš (advisor)
Thesis deals with design of a steel structure of multi-storey office building. It is a six-storey steel structure of square plan with dimensions of 40 x 48 meters and height of 21,5 meters. Structural design report is made by a combination of manual calculations and calculations using software Scia engineer. Structural design report includes calculations of: truss girder, column, connection, bracing, beam, secondary beam and column anchorage. Thesis includes drawing documentation and report.
|
|
Reinforced concrete load-bearing construction
Kozumplík, Lukáš ; Kraut, Jan (referee) ; Šulák, Pavel (advisor)
The diploma thesis is focused on a structural analysis of a multi-storey office building. The Loadbearing structure is made of cast-in-place reinforced concrete. In the thesis there is analysed a selected floor slab, a column, a foundation pad, a part of loadbearing wall and a precast staircase. Computation of internal forces is carried out by computational software SCIA Engineer. The Results from the software are verificated via simplified manual method. Assessment of a structure is done according to valid standards and regulations.
|
|
Office Centre
Ďureje, Andrej ; Šmak, Milan (referee) ; Pilgr, Milan (advisor)
The content of diploma thesis is designing, project development and static estimation of the supporting steel structure in two different variants of the atypical office building (business center). The object is located in densely built-up location in the Brno. The building is designed as a seven storey. The entrances to the above ground floors are designed from balconies, which are roofed and situated on the edge of the object. The footprint dimensions are 57,6 x 57,6 m. Variants are compared based on weight and size of the coating surfaces supporting construction of the object. Drawing documentation, static calculation of joints and details of the construction are processed for the best variant.
|
|
Air - conditioning of office building
Balcar, Petr ; Košner, Jan (referee) ; Janotková, Eva (advisor)
The main goal of the submitted thesis is the design of central conditioning system used to ensure the required internal microclimate of office space and meeting rooms on the 2nd floor of office building, located in the city of Brno. The first part provides an overview of air conditioning systems and the appropriate central air conditioning system is selected. In the next part is designed the devices for air conditioning by building layout, properties of building structures, equipment and office space occupied. The work also submits drawing documentation, technical report and specification of materials used.
|
|
The Office Building Brno-Husovice
Karlík, Štěpán ; Kalivoda, Tomáš (referee) ; Kalousek, Lubor (advisor)
This diploma thesis deals with a new built office building in Brno-Husovice. The building is situated in a gap site on the street Dukelská třída. The building has four aboveground floors and underground garages. The ground floor is divided into relaxation area and a commercial section with five shopping units. The second and the third floor are designed as a variable office space. The engine room for ventilation is situated on the fourth floor. Construction system is cast-in-place concrete frame. The building is roofed with the green roofs. Foundations are made of large diameter drilled piles.
|
|
Multifunctional Building
Fux, Ondřej ; Hrdličková, Eliška (referee) ; Sukopová, Dáša (advisor)
This thesis describes the design of a multifunctional three-storey house. The proposal includes the choice of the structural system, the choice of walls, windows, designing footings, staircases, numerous parking areas, flat roof drainage, management of rainwater. The specialized section is designed ventilating buildings with VRF systems heating / cooling with heat pumping. A check is a calculation of bearing capacity of ceiling construction.
|
|
Business and office centre
Novotný, Petr ; Štrba, Michal (referee) ; Pilgr, Milan (advisor)
The aim of this master´s thesis was design and analysis of a steel supporting structure of a building for business and administration purposes in Ostrava. It includes an assessment of the main load-bearing construction elements and the selected connections. The thesis also contains the design documentation of the building and compares two different variants of the steel construction design.
|
|
Office Building
Lampa, Martin ; Burianová, Lenka (referee) ; Smolka, Radim (advisor)
The dissertation named “Office building” is elaborated as a building documentation in agreement with the current standards and legal norms and acts. It is a two storey building and contains a maisonette section, is basementless with a flat roof and applying the combined constructional system. The building is constructed on the concrete base slab; vertical bearing structures are constructed of reinforced concrete and wooden pillars, the roof and ceiling bearing structures consist of wooden beams. The building is designed for administrative purposes and related activities. Walls are constructed of reinforced concrete, using sandwich wall system with wooden elements and there is a vegetative roof. The building is designed as low-energetic.
|
|
Construction technological project of administration building in Zlín-Luková
Vyoral, Martin ; Novotný, Michal (referee) ; Diaz, Yvetta (advisor)
In this thesis is solved by building technological project of an office building in Zlin Januška Compressors - Lukov focusing on selected technological stage. Namely, the implementation of large wooden roof trusses and performing thermal insulation composite system. For these technological steps are processing all documents that are necessary for their implementation. It's technical report on construction technology project, time and financial plan of the building, study the implementation of major technological stages of the main building structure, design of the main building mechanisms, the project site equipment with appropriate drawings and calculations of the costs of site, technical regulations implementing the activities related to monitoring and test plans.
|