|
Optimalization of material flow in automotive industry
Kolář, Tomáš ; Jirsák, Petr (advisor) ; Vinš, Marek (referee)
This master thesis is focussed on optimalization of material flow in an automotive company. First part introduce theoretical background. Automotive industry and its actual trends on global markets. Follows short introduction of the company where project of this thesis was executed. Main theoretical part describes concept of lean management, its tools in practical examples, but it is also focussed on philosophical approach to the work and mindset of the company. Follows the aplication part based on theoretical background. The whole project of this master thesis is focussed on specific area called PC store. At first this area is showed in context of overall material flow. Shortly there are introduced processes and areas where full material packaging flows. Follows deeper analysis and optimalization of PC store itself. There are three approaches of stock and lead time reduction applied. Last part shows the comparison of initial and future state including performed changes.
|
|
Výběr a implementace open source nástroje pro řízení portfolia projektů
Marek, Jan ; Chlapek, Dušan (advisor) ; Kučera, Jan (referee)
Methods and ways of implementation of changes and innovations in companies through project management are in today's society very well established. There exists methodologies, techniques and tools for the management of individual projects. However in a role of project manager, I very often faced the fact that companies are performing the project portfolio management in very intuitive way. This in itself leads to failed and prematurely terminated projects, initiation of the wrong projects or realisation of correct projects, but at the wrong time. Very often I have also recognized, that there is lack of awareness of fact, that there are also Open Source applications that can help with the organization's portfolio. This thesis deals with the definition of requirements, search and selection of proper OSS application and subsequent implementation. In the first part of this thesis I prepare a theoretical framework about PPM, and on that basis then identify and verify a set of requirements for selection of right OSS PPM application. The next section of thesis describes searching for suitable applications from a variety of sources, assessment against the requirements and the final selection. In the last part the implementation project is drafted, which aims to serve other colleagues in project management as one of the possible implementation paths. The outputs are then continuously confronted with experts in matter of projects and project management in the field of IT in order to maximize symbiosis between theory and real life experiences. Virtually every project management methodology defines the collection of already-proven techniques, best practices or lessons learned from the previous similar implementations. The main contribution of this thesis I see in fact that it contains not only the design of the project implementation, but also describes a logical path, what leads to the result. Therefore this thesis could be used as a base or discussed best practice, when a project of implementation of PPM application in place.
|
|
Developing open approach to mathematics in future primary school teachers
Samková, L. ; Tichá, Marie
In our contribution we focus on the possibility to develop open approach to mathematics in future primary school teachers during a university course on mathematics conducted in inquiry-based manner. We analyse data obtained in the beginning and in the end of the course with respect to two main aspects related to open approach to mathematics: searching for all solutions of a task, and acceptance of different forms of notation of a given solution. Data analysis revealed in the participants three different shifts towards open approach to mathematics, and showed that after the active participation in the course each of the participants improved at least in one of the monitored aspects, and that none of the participants got worse in any of the aspects.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
Modelling, parameter estimation, optimisation and control of transport and reaction processes in bioreactors.
ŠTUMBAUER, Václav
With the significant potential of microalgae as a major biofuel source of the future, a considerable scientific attention is attracted towards the field of biotechnology and bioprocess engineering. Nevertheless the current photobioreactor (PBR) design methods are still too empirical. With this work I would like to promote the idea of designing a production system, such as a PBR, completely \emph{in silico}, thus allowing for the in silico optimization and optimal control determination. The thesis deals with the PBR modeling and simulation. It addresses two crucial issues in the current state-of-the-art PBR modeling. The first issue relevant to the deficiency of the currently available models - the incorrect or insufficient treatment of either the transport process modeling, the reaction modeling or the coupling between these two models. A correct treatment of both the transport and the reaction phenomena is proposed in the thesis - in the form of a unified modeling framework consisting of three interconnected parts - (i) the state system, (ii) the fluid-dynamic model and (iii) optimal control determination. The proposed model structure allows prediction of the PBR performance with respect to the modelled PBR size, geometry, operating conditions or a particular microalgae strain. The proposed unified modeling approach is applied to the case of the Couette-Taylor photobioreactor (CTBR) where it is used for the optimal control solution. The PBR represents a complex multiscale problem and especially in the case of the production scale systems, the associated computational costs are paramount. This is the second crucial issue addressed in the thesis. With respect to the computational complexity, the fluid dynamics simulation is the most costly part of the PBR simulation. To model the fluid flow with the classical CFD (Computational Fluid Dynamics) methods inside a production scale PBR leads to an enormous grid size. This usually requires a parallel implementation of the solver but in the parallelization of the classical methods lies another relevant issue - that of the amount of data the individual nodes must interchange with each other. The thesis addresses the performance relevant issues by proposing and evaluation alternative approaches to the fluid flow simulation. These approaches are more suitable to the parallel implementation than the classical methods because of their rather local character in comparison to the classical methods - namely the Lattice Boltzmann Method (LBM) for fluid flow, which is the primary focus of the thesis in this regard and alternatively also the discrete random walk based method (DRW). As the outcome of the thesis I have developed and validated a new Lagrangian general modeling approach to the transport and reaction processes in PBR - a framework based on the Lattice Boltzmann method (LBM) and the model of the Photosynthetic Factory (PSF) that models correctly the transport and reaction processes and their coupling. Further I have implemented a software prototype based on the proposed modeling approach and validated this prototype on the case of the Coutte-Taylor PBR. I have also demonstrated that the modeling approach has a significant potential from the computational costs point of view by implementing and validating the software prototype on the parallel architecture of CUDA (Compute Unified Device Architecture). The current parallel implementation is approximately 20 times faster than the unparallized one and decreases thus significantly the iteration cycle of the PBR design process.
|
|
Effect of snowpack on runoff generation during rain on snow event.
Juras, Roman ; Máca, Petr (advisor) ; Ladislav , Ladislav (referee)
During a winter season, when snow covers the watershed, the frequency of rain-on-snow (ROS) events is still raising. ROS can cause severe natural hazards like floods or wet avalanches. Prediction of ROS effects is linked to better understanding of snowpack runoff dynamics and its composition. Deploying rainfall simulation together with hydrological tracers was tested as a convenient tool for this purpose. Overall 18 sprinkling experiments were conducted on snow featuring different initial conditions in mountainous regions over middle and western Europe.
Dye tracer brilliant blue (FCF) was used for flow regime determination, because it enables to visualise preferential paths and layers interface. Snowpack runoff composition was assessed by hydrograph separation method, which provided appropriate results with acceptable uncertainty. It was not possible to use concurrently these two techniques because of technical reasons, however it would extend our gained knowledge. Snowmelt water amount in the snowpack runoff was estimated by energy balance (EB) equation, which is very efficient but quality inputs demanding. This was also the reason, why EB was deployed within only single experiment.
Timing of snowpack runoff onset decrease mainly with the rain intensity. Initial snowpack properties like bulk density or wetness are less important for time of runoff generation compared to the rain intensity. On the other het when same rain intensity was applied, non-ripe snowpack featuring less bulk density created runoff faster than the ripe snowpack featuring higher bulk density. Snowpack runoff magnitude mainly depends on the snowpack initial saturation. Ripe snowpack with higher saturation enabled to generate higher cumulative runoff where contributed by max 50 %. In contrary, rainwater travelled through the non-ripe snowpack relatively fast and contributed runoff by approx. 80 %.
Runoff prediction was tested by deploying Richards equation included in SNOWPACK model. The model was modified using a dual-domain approach to better simulate snowpack runoff under preferential flow conditions. Presented approach demonstrated an improvement in all simulated aspects compared to the more traditional method when only matrix flow is considered.
|
|
Managerial skills
Červinková, Barbora ; Kříž, Josef (advisor) ; Zdeněk, Zdeněk (referee)
The theoretical basis of this thesis explains the terms closely associated with the management and managerial skills. Introductory part relates to approach the concept itself and the executive management, we are further broken down managerial functions, which are continuously illuminates to describe other skills, such as communication, goal setting, skills and coaching. The main point is to approach the concepts of soft and hard skills that managers should possess, or which should in the course of his practice to learn. Only by careful control of both of these groups of skills can lead to good organization. For a clearer explanation of the managerial skills included graphic view, which approximates the distribution of skills. In the second part, a practical part, described the situation with the existing skills of managers in the selected company. Thanks to the questionnaire, it is possible to measure the current level of acquired skills of managers at three levels and can be evaluated, what is the interest of improving individual skills, or whether managers feel sufficiently qualified for their job positions.
|
|
Design of Experiment for Non-Stationary Processes of Production
Jadrná, Monika ; Macák, Tomáš (advisor)
The doctoral thesis is concerned with the services sector and the area of mass production. Particularly, the optimization of the product portfolio of the travel agency and the optimization of production rounds of ammunition.
The theoretical part deals with the current overview of discussed topic. Further, the terminology and methods of the decision-making process are defined to support decision making. The theoretical basis of research focused on the choice of appropriate input variables in the area of services, and on the choice of a particular material option in the production area and appropriate equipment for the production. The theoretical part forms the basis for the practical part of the thesis.
For the doctoral thesis was chosen an enterprise operating in the defined sector. Product portfolio for the services sector is optimised using Fuzzy logic and Fuzzy sets so that the enterprise can maintain its competitiveness in todays highly ambitious market. Product portfolio for manufacture is optimised for achieving desired properties of the product.
The main aim of the thesis is to propose a new methodological approach for the management of selected business processes in their nonstationary time course. The aim of the practical implementation is to verify the functionality of the proposed methodological approach, both in the area of services and in the field of mass production.
|
|
Conversations with Jindřiška Křivánková
Fröhlichová, Marie ; SOPROVÁ, Jana (advisor) ; HALAŠ, Adam (referee)
The aim of the thesis is to describe the principles of creativity of Jindřiška Křivánková, senior professional and a highly experienced theatre performer; and confront her way of thinking and creativity with my own artistic view and my skills gained during my time of study at HAMU. Thereafter, the thesis will first elaborate on her theatre development, from the beginning of her carrier until now. Further it will addresses the major aspects and circumstances that led to her prospering in the field. It also examines the influence of particular personalities that helped her to develop her distinct views on theatre. A further discussion on the various aspects of artistic creation and creative process in a mutual confrontation of the two of us, in which we touch not only broad general issues concerning the culture and theatre, but also the special approaches towards it.
|
|
Community care in psychiatry
BÍNOVÁ, Romana
Abstract Diploma thesis deals with the issue of community care in psychiatry and its objective is to describe the importance of a nurse in providing this care. Community psychiatric care is a very wide area of an intermediary patient assistance designed to help the patients in any areas of their lives. Although in the Czech Republic community care has not achieved the appropriate development yet, its benefits for patients are important now and its importance has been growing. In the theoretical part, after a brief introduction to community care issues, history, principles, but also community care connection with nursing care, are mentioned. Subsequently, attention is paid to particular areas of community care that are important for the mentally ill and the role of a nurse in these areas is described. The approach to the mentally ill, the issue of stigmatization and psychiatric care organizations are mentioned. In the theoretical are part, psychiatric illnesses that may occur in community care are also analyzed and it is explained how community care may be beneficial for psychiatric patients. In the practical part, the objective was to find out the level of psychiatric nurses´ awareness of community care and to determine if they see the sense of community care in psychiatry. Making a survey of community care in which nurses can be involved was another objective of the work. The nurses´ responses to the stated hypotheses were statistically analyzed within quantitative research. The purpose of hypotheses stated was to determine whether nurses with the work experience longer than ten years are more likely to believe that psychiatric care is more beneficial for patients than hospitalization., And also, if nurses with an education higher than secondary have better awareness of community services provision. Other hypotheses were focused on finding out whether nurses consider the most common community care services issue in the Czech Republic to be housing promotion and if nurses aged over thirty years are more aware of the nurses´ role importance in community care. None of those hypotheses were confirmed. The hypothesis assuming that nurses obtain more information on community care from the Internet and literature than at workshops was confirmed. Psychiatric nurses working in mental homes in the South Moravian region and the Vysočina region took part in this research. A component of the practical part is also an analysis of community services in these regions. In both the regions 13 civic associations and community centers were mapped.
|
guest ::
