|
|
Mobile applications development for remote control of instrumentation
Macek, Michal ; Křivík, Petr (referee) ; Frk, Martin (advisor)
The presented work describes the growing trend of using mobile devices to control laboratory instruments and displaying of measured data. The main objective is the application development for mobile devices, which will allow to remotely control and measure with laboratory instruments. The practical part is focused to programming mobile application which will be able by using the local network to connect multiple laboratory instruments, setting them for different types of measurements and then display measured data.
|
|
|
Use of mobile platforms Android for instruments control
Macek, Michal ; Šteffan, Pavel (referee) ; Frk, Martin (advisor)
The present work describes current trends and modern methods using mobile devices to operate laboratory equipment and subsequent measurements. The main objective is create application for mobile devices running on Android system, which will be remotely controlled and measured with instruments in the laboratory. Practical activities are focused on programming mobile application that can remotely laboratory device contact, set for different types of measurements supported device and then read the measurement data from the device to a mobile device.
|
|
|
Power LED Current Analyzer
Ryba, Ivan ; Vochyán,, Josef (referee) ; Šebesta, Jiří (advisor)
This thesis describes attributes of LED, especially high power LED. Evaluates posibilities of measuring the current passing through the high power LED device in the automotive industry. The basic requirement for the analyzer is adjusting it for the voltage and current through LEDs. Analyzer have to display the mean current and frequency. Additionally also minimum and maximum current, duty cycle and amplitude might me displayed. The central element of the device is ATmega16 microcontroller.
|
|
|
Expressing uncertainty of accurate lenght measurement II
Šrámek, Jan ; Pernikář, Jiří (referee) ; Koška, Petr (advisor)
This diploma thesis is supposed to inform readers interested in the distance measurements uncertainty on practical issues connected with the solving of these troubles when utilising a frequently used calibration method - the Tesa NPL measure instrument. This measuring was implemented by the Czech Metrologic Institute, where the author works; therefore he could take advantage of his rich experience as well as experience of his superiors and colleagues. The author regards the national metrological institute (CMI) as a sufficient guarantee for the hereinafter presented materials, both regarding the professional qualification and from the perspective of formal rightness of this thesis.
|
|
|
Communication of a Measuring Device with a Computer – Laboratory Experiments
Cigánek, Jan ; Frýza, Tomáš (referee) ; Jakubová, Ivana (advisor)
This project deals with the programme for automated measurement. Project describes main theory advices and possibilities of building programme with language C++. It shows complication in communication of PC with measurement devices and it describes programme commands. This work includes programme, solution, structure with examples of the algorithm and source code. The designed control programme has been applied for automated measurement of frequency characteristics of low-pass and high-pass filters with the analogue multiplier AD 633 using the programmable DC power supply Agilent E3631A, the digital multimeter Agilent 34411A or digital storage oscilloscope Tektronix TDS 1012 and generator Agilent 33220A.
|
|
|
Web interface for on-line administration of laboratory tasks
Belko, Jakub ; Rozsívalová, Zdenka (referee) ; Frk, Martin (advisor)
The present work describes the current trends and e-learning methods using the Internet in the educational process on Czech and foreign universities. The main objective is to create a web interface for on-line administrations of laboratory tasks named "Laboratorě UETE". Practical work is focused on programming web applications and modules for management of instrumentation for laboratory protocols administration including implementation of the IP video cameras outputs and sensor atmospheric conditions. An integral part of this work is to create a module for simulation of physical quantities using commercially available software components based on client – server system.
|
|
| |
|
|
Uncertainties of Accurate Length Measurement
Šrámek, Jan ; Brno), Václav Duchoň (ČMI (referee) ; Vdoleček, František (advisor)
This diploma thesis is supposed to inform readers interested in the distance measurements un-certainty on practical issues connected with the solving of these troubles when utilising a frequently used calibration method - the SIP distance meter. This measuring was implemented by the Czech Metrologic Institute, where the author works; therefore he could take advantage of his rich experience as well as experience of his superiors and colleagues. The author regards the national metrological institute (ČMI) as a sufficient guarantee for the hereinafter presented materials, both regarding the professional qualification and from the perspective of formal rightness of this thesis.
|
|
|
Physical measure by the mobile phone
MATYS, Jaroslav
This diploma thesis topic "Physical measure by the mobile phone" deals in theoretical part with term BYOD (Bring Your Own Device) and lesson 1:1, where is solving motivation of integrating devices into the lessons, what are the advantages and disadvatages of this problems and also what are the worries that pedagogues could have. Then thesis deals with equipment of mobile phones, principle of sensors functioning and in the end deals with searches of application for physical measuring by the mobile phones sensors, actual to the date of the writing this thesis. In the practical part thesis deals with comparison of values from aplication to the laboratory equipment. In the end deals with proposals of lessons activities with mobile applications.
|
|
| |
guest ::
