|
|
Process FMECA - implementation of information system in the bank
Müllerová, Marie ; Koch, Miloš (referee) ; Blecha, Petr (advisor)
This thesis considers of process FMECA analysis that is applied to the process of implementation the information system in the bank. The theoretical part focuses on risk management and using of methods FMEA and FMECA. In the practical part of thesis is introduced the company, for that the process of implementation of the information system is designed. In addition the analysis of the external and internal environment in relaiton to the information system is made. The result of these analysis is SWOT analysis. Then the process of implementation the information system is described and FMECA analysis is performed. Based of the results of the analysis are designed appropriate measures that will eliminate the risks or that will reduce their impacts.
|
|
|
Risk Management Focused on the Reliability and Efficiency of the Human Factor
Štěpánová, Markéta ; Sotoniak, Tomáš (referee) ; Kruliš, Jiří (advisor)
The mater’s thesis focuses on the issue of the reliability and efficiency performance of the human factor, identifying the risks of potential causes of failure of the chosen company. Based on the theoretical knowledge referred to in the first part thesis is designed procedures useful as a tool to prevent individual failures, focusing on solutions to the adverse conditions of stress or crisis when exposed to the human factor. The final section suggests the motivation of employees by proactively identifying risks.
|
|
|
Gear failures
Paška, Josef ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This bachelor thesis is focused on gears. The first part of the thesis informs about the sorting of each type of gears. In the second part, there is a detailed overview of possible gears failures, including their causes, manifestation and their potential solutions for correction. The last part of the thesis handles technical experiment, which aims to performance of vibrodiagnostic of the gear system, tested on the test state. Measured data were subsequently processed by commercially accessible software, where the vibrations of transmission were recorded – firstly at the beginning of measuring when the gears were without damage and afterwards at the end of testing, when the state of damaged teeth was detected.
|
|
|
Uninterruptible Power Supply
Kučera, Josef ; Sekora, Jiří (referee) ; Fedra, Petr (advisor)
This bachelor thesis is focused on the proposal for an appropriate source of uninterruptible power supply (UPS) to the school server UBMI where is currently installed HIS (hospital information system) CLINICOM Corporate SMS. UPS should have ensure the protection of data being unfinished, secure off site and to inform the line voltage failure.
|
|
|
The amount of damage determination in cases of defects and failures of flexible pavements road structures
Špaček, Petr ; Jůza, Petr (referee) ; Kledus, Robert (referee) ; Stehlík, Dušan (advisor)
This thesis is focused on possibilities of financial valuation of flexible pavements surface layers conditions, in connection with whole life cycle of the pavement and certain possibilities of their maintenance and repairs, in cases of defects and failures from forensic engineering point of view. There were carried out analysis of the topics connected with judging of flexible pavements surface layers defects and failures related to forensic investigation in the Czech Republic, as well as abroad. In this thesis there were created pricing models of the certain construction works which are related to repairs and maintenance of flexible pavements. Within the possibilities of the author, there were compared market prices of the particular construction works in selected regions with the prices according to generally used pricing systems in the Czech Republic. The goal of this thesis is to create unified methodology for amount of damage financial valuation in cases of defects and failures of flexible road pavements surface layers for forensic engineering practice in the Czech Republic.
|
|
|
Risk Analysis of Self-Driven Vehicles
Weigel, Filip ; Šimek, Václav (referee) ; Strnadel, Josef (advisor)
The goal of this thesis was to design and implement system for risk analysis in self-driving cars. This thesis focused on design and implementation of system for risk analysis in models. One of the requirements for the system was to be flexible and robust. Design of the risk analysis was presented at theoretical level and then implemented in models of ABS and ESP systems in UPPAAL environment. The system was then tested via multiple experiments. The experiments were beneficial and the system for risk analysis correctly evaluated failure scenarios with adequate response to the rising level of risk. Experiment outputs were then presented at graphs with comment to each failure scenario.
|
|
| |
|
|
Diagnostics of the construction and technical condition of the granary building
Velát, Matěj ; Láník, Jaromír (referee) ; Schmid, Pavel (advisor)
The bachelor's thesis deals with the diagnostics of the historic granary building and the conceptual design of the reconstruction for further use. The thesis focuses on the history of similar buildings especially in the Czech lands and on the historical development of the building. The practical part of the thesis denies the course and results of the preliminary inspection of the structure and the failures found which are further addressed in more detail in terms of their nature. The presumed reason for the occurrence of failures the state of failures their influence on the construction and an outline of the risk analysis resulting from the failures are determined. Furthermore, a proposal for a methodology of detailed object diagnostics is based on the results of a preliminary inspection. According to the information about the object found during the diagnostics two ideological proposals for further possible use of the object are processed, including the necessary construction modifications.
|
|
|
System of Identification Solder Joint Failures
Vejmola, Tomáš ; Řezníček, Michal (referee) ; Šandera, Josef (advisor)
This paper describes the draft and implementation of a system for identifying failures on the soldered joints from already existing system, which is, however, limited by dependence of the operating system of the human factor. The innovated system provides us an automatic testing of soldered joints using a computer, with subsequent processing of data electronically using the corresponding software. The first part is devoted to the theory of the formation of flaws on the soldered joints and to the familiarization with uninnovated system. Subsequently, work continues with the practical part, which introduces us the procedure and implementation of the innovated system for identifying failures on the soldered joints. The final part of this paper is an evaluation of the results and fulfilment of work requirements.
|
|
|
Design and Realization of a System for Masking Dispatcher PC Cut-Off by Backing-Up Data Obtained from TAMRON Weighing-Machine
Štulír, Vojtěch ; Šimek, Václav (referee) ; Strnadel, Josef (advisor)
In the productive operation any kind of plant is undesirable due to failure of system that all production has been stopped. Therefore, different security and backup devices that covered those failures are being developed and used. This thesis describes vulnerabilities in the real operation which are important for treatment and reduce the risk of failure in the whole production. Here is analyzed problem dispatching computer failure and its solution using a module for covering failure. The function of module consists in backup during failure, their sending and treating them after system failure removal. Gradually described, there is an analysis of the system and place the module into their architecture. After all details follow description of module development from design through implementation to deployment and testing in reality.
|
guest ::
