National Repository of Grey Literature 38 records found  beginprevious21 - 30next  jump to record: Search took 0.00 seconds. 
Experimental investigation of natrium chloride neutron induced reactions for nuclear reactors cooled by molten salts
Burian, J.
The article deals with the experiment within the Master’s thesis written on Department of Electrical Power Engineering in Faculty of Electrical Engineering and Communication (FEEC) on Brno University of Technology (BUT). The behavior of NaCl in neutron field was studied via irradiation indium cylinders surrounded by the salt. As a result are charts of reaction rate for two nuclear reactions and three measuring channels.
Experimental and calculational salts' properties investigation for MSR reactors from nuclear data point-of-view
Burian, Jiří ; Ing. Miroslav Zeman, PhD., SÚJB RC Brno (referee) ; Katovský, Karel (advisor)
Nowadays there is research into molten salt reactors. The use of chlorine-based salts, which would be more available than known fluoride salts, is envisaged. The subject of research is not only the chemical and physical properties of chloride salts, but also their behavior in the neutron field and the influence of neutron balance inside the reactor. Many properties can also be determined using calculations that draw information from scientific nuclear libraries (endf). The purpose of this work is to compare important nuclear libraries with each other, and also to compare the reaction rates calculated from the library data with the reaction rates obtained by self-measurement. The preview will include a description of the necessary activities associated with the preparation of measurements, instructions for compiling the computer program NJOY and the process of the measurement itself. At the end of the work will be summarized the results and statements of which nuclear library is the closest in its values to the results of experiments.
Use of the "model based design" method for the design of an embedded application
Mačišák, Martin ; Fiedler, Petr (referee) ; Bradáč, Zdeněk (advisor)
This diploma thesis demonstrates the differences between approaches in software development. A code generation search is performed. The work describes possible tools and methods of code validation and verification. The next part provides information on the use of a design-based model in critical-demanding applications. Further, the work describes the proposal of platforms for controling the BLDC motor. Low leve software is programed for these chosen platforms. The logic of controling and user interface is created. The logic of controling is created and tested in Simulink. Further more whole programmed code is connected with the low level layer. The whole solution of my diploma thesis is tested.
Preparation of diagnostic laboratory for accreditation
Mačišáková, Kateřina ; Polsterová, Helena (referee) ; Jandová, Kristýna (advisor)
This diploma thesis deals with the topic of accreditation of a diagnostic laboratory. It analyses theoretical knowledge in the field of accreditation, accreditation agency and its history. It contains a list and sample of documents required for accreditation and a description of the process. Part of the work is also a description of the requirements arising from the standard ČSN EN ISO / IEC 17025. The work briefly introduces the company whose laboratory is to be accredited. The following are the technologies the company uses and wants to accredit. The main part of this diploma thesis is the Quality manual, which was created with all needed attachments. This Quality manual is the most significant document, which is necessary for the process of accreditation.
Teaching-space paradigm
Vašička, Pavel ; Müller, Rudolf (referee) ; Rozwalka, Szymon (advisor)
The aim of the bachelor's thesis is to create a new Faculty of Architecture in close proximity to the Faculty of Fine Arts on the BUT campus. The aim was to achieve a dignified environment for teaching future architects. In the complex there is a building designed for the Faculty of Architecture. However, it does not have sufficient capacity to cover teaching needs. Therefore, both the existing building and the extension and their interconnection were solved within the project. The main goal of the project was to create an environment that reflects today. The architect in particular should have a more general overview. The premises are as open and shared as possible, so that the students themselves enrich each other as much as possible. Emphasis is placed on the open layout of the interior, into which the exterior blends in selected places, the floors are enriched with atriums and elevated floors, which allow greater social contact.
Teaching-space paradigm
Behro, Daniel ; Maršíková, Hana (referee) ; Sládeček, Svatopluk (advisor)
What should the current area of higher education be like? And what should be the space for creative work? Is the type of teaching reflected in the school building itself? I wonder if, for example, the Faculty of Social Studies would be made up only of social spaces? If the Faculty of Mechanical Engineering were to look like a hall for the production of automotive components, what would the Faculty of Legal Studies look like? And what about the Faculty of Architecture? Does the appearance and quality of the building determine the appearance of the projects created there? Does its structure affect the next generation of architects? Or should it be as clean and white as canvas before the first stroke of the brush is projected on it? I deal with both assumptions: the building as a pure paper, which gives freedom for creativity and does not limit the mind, and on the other hand, matter, structure, space, which shows what architecture can do. I prefer freedom of choice, which is why I want to describe both approaches in the proposal. Open-space free layout versus firmly defined closed studios. Artistic space, free versus technically and rationally defined space. Virtual space versus space of unchanging matter.
Kraví hora - BUT Family silver
Davčíková, Gabriela ; Kyselka,, Mojmír (referee) ; Nový, Alois (advisor)
The subject matter of the Master's Thesis deals with the design of the Brno University of Technology (BUT) compound on Kraví hora and comes as a follow-up to the work done in the previous academic term. The aim was to combine the interests of the city of Brno and that of the Brno University of Technology (BUT); to create a common zone which would incorporate attractive park areas for the general public and a representational space for the promotion of BUT and other activities that the university has been lacking to date. The primary objective was to make the compound more accessible to the public as there are currently community gardens which stand as a barrier. The entire BUT compound is thus integrated with the neighbourhood, providing numerous public areas that are ideal for relaxation and leisure activities where people may enjoy their free time. The new buildings will offer visitors an introduction to the history and current state of the University of Technology, mainly via exhibitions and entertainment. The faculty buildings, designed as a recruitment centre and used to present student work, will perform additional functions. The current facilities will be utilized as areas for graduates in creative disciplines who will be able to rent their first art studios there. The new buildings are set in the terrain so as not to disrupt the natural aspect of the park, seamlessly blending into the surrounding landscape. Another interesting feature is an observation tower, designed to further utilize the location's potential and provide visitors with a wide view of the area, far into its surroundings.
Simulator of current output 0-24mA
Mačišáková, Kateřina ; Benešl, Tomáš (referee) ; Bradáč, Zdeněk (advisor)
This bachelor thesis deals with design of very accurate current output simulator 0-24 mA with microcontroller with resolution 0.001 mA. In the thesis I deal with the market re-search with similar devices, theory and then with the conception of the whole system concept, with the identification of used components and with the evaluation of their suitability. I propose here a circuit diagram and a printed circuit board, which I then produce and install. For the resulting device I design and produce a box that will suita-bly complement and unify the entire system. I will revive the whole device, program it and test its functionality.
RECONSTRUCTION AND REBUILDING OF CITY BREWERY IN VYŠKOV
Vršanová, Dominika ; Zemánek, Václav (referee) ; Boháč, Ivo (advisor)
The bachelor thesis will solve the design of the transformation of the existing premises of the original bishop's brewery with a three-hundred-year tradition into a multifunctional complex fulfilling the following tasks. Renewal of production in the form of a small city brewery, adding new functions for the presentation of the brewery and cultural and social events. Reconstruction and completion of architecturally valuable objects, adding new objects for new functions.
Kraví hora - BUT Family silver
Prosseková, Jarmila ; Kyselka,, Mojmír (referee) ; Nový, Alois (advisor)
The focus of this thesis is an architectural study of the Kraví Hora area in Brno in a 1:200 scale. The area is significant in both size and location, but has been underutilized up to this point. The objective of the thesis is to discover a solution acceptable for the city of Brno as well as BUT, whose intentions with the area differ significantly. The area has been designed to have recreational spaces of greenery. Traffic has been either largely reduced, or eliminated entirely. A wide variety of sports, eductational programs and recreational activities has been made available for visitors of all ages. The objective of the planned area is to inspire and positively motivate the study of technology and interest in science via its functional design. Exhibition areas, lecture halls, rentable workspaces for graduates, a recruitment center and general storage spaces has been designed in the area. The design of the buildings is based around the incline of the plot – they have a maximum of one extra floor over the level of the surrounding terrain. The green roof and the vertical outer layer of laminated timber is designed to provide a natural character to the structures. The predominantly horizontal area is granted an element of verticality in the form of a lookout tower.

National Repository of Grey Literature : 38 records found   beginprevious21 - 30next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.