|
|
Stroke mechanism of crane trolley
Galas, Radovan ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
Bachelor's thesis deals with design of stroke mechanism of crane trolley loads for the weights which do not exceed 5 000 kg. This thesis divided into written and practical sections. Written part deals with the calculation of the principal dimensions of lifting and stress control of cable reel. In this work there are also given reasons for choosing certain key parts of the lifting mechanism, such as: electric motor, gearbox, etc. Prior to the calculations in each chapter there is usually located a short introduction of the topic. The practical part contains a drawing of the complete lifting mechanism, cable reel assembly and two production drawings.
|
|
|
Analysis of traction drive for full electric vehicle
Matela, Petr ; Marušinec, Jaromír (referee) ; Solař, Martin (advisor)
The subject of my bachelor´s thesis is research and computations of the dynamics of different types of engines. The first part of it is devoted to theoretical introduction to electromobilism and electro mobiles history. The rest is about benefits and problems of electro mobiles, their current state and available energy sources. In the conclusion of this thesis there are all necessary calculations and the dynamics of three different engine types is solved and compared.
|
|
|
Concept of electromobile
Melounek, Michal ; Beran, Martin (referee) ; Porteš, Petr (advisor)
The object of the bachelor thesis is to create a research in field of electromobile. The project outset is devoted to the main ideas and to the history of the electromobilism. The second part describes electric system and used conceptions of the electric motor placing. The following part describes the sources of energy and the ways to recharge. The end includes some electro mobiles that are going to be a stock car.
|
|
|
Conceptual design of bridge crane 50 tonne
Soukup, Lumír ; Pokorný, Přemysl (referee) ; Kubín, Martin (advisor)
This bachelor work is koncerned with concept propsal of traveller crane with tonnage 50 t. Work content proposal of crane runway girder, travelling wheel, rail and in calculators part is proposal of parts of traveling crab like the drum, guide and balancing pulley, cable, hook, wheels, whels bearing, travelling wheel, drive of traveling crab. In work is assembly drawing and production drawing of drum.
|
|
|
Cement worm conveyor
Fránek, Martin ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
This bachelor project contains of a detail and design of a sloping cement worm conveyor. The project consists of technical specifications and drawing documentation. The technical specifications deal with basic design, calculations and stress analysis. The drawing documentation reflects the main assemble conveyor, a bill of material and welding assembly of the spiral worm.
|
|
|
Cable winch
Kudláček, Miroslav ; Kašpárek, Jaroslav (referee) ; Malášek, Jiří (advisor)
The goal of my bachelor´ s thesis is to find a construction solution for a cable winch for a safe take-off of model gliders of a wingspan of maximum 5 m, a weight of 5kg and with a maximum take-off speed of 17 m.s-1. The thesis includes a project of a winding drum, including a control calculation, alternatives, the choice of a drive unit and a ductile element and a project of a frame.
|
|
|
Alternative Drive of Automobile
Dubský, Jiří ; Kloss, Ondřej (referee) ; Kaplan, Zdeněk (advisor)
This bachelor work deal with problems alternative drive for automobile with narrower intent on hybrid drive. Features run - down and description possible options for drive cars. Further is focused on cars with hybrid drive and on problems hereof unconventional drive with presentation characteristic feature, advantages and disadvantage.
|
|
|
Travelling Crab
Šponar, Pavel ; Kašpárek, Jaroslav (referee) ; Malášek, Jiří (advisor)
Bachelor thesis deals with a project of the travelling mechanism of the travelling crab (electric motor and gear-box) and check calculation for starting. The aim of this work is to design a travelling wheel with save, therefore it is necessary to design the suitable normalized components. The solidity calculations of the travelling wheel, the bearing and shaft ( static and dynamin straining).
|
|
|
The redesign of the compressor for electromotor driving
Mikulka, Vít ; Venclík, Jiří (referee) ; Mazůrek, Ivan (advisor)
This bachelor thesis deals with redesign of the compressor for electromotor driving. First part focuses on the principle of compressors, their development and division. The next part describes a compressor MK 100 produced by Benda kompresory Ltd. company. The technical solution of its redesign for 2,2kW electromotor propulsion with maintaining a rotation speed mode of original Honda engine is explained in the last part. This compressor should be used in its redesign version at FME BUT in Brno.
|
|
|
Design of electric tackle
Bádr, Miroslav ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
Purposes work was create technical documentation to an electrically driven tackle with actuated by hand undercarriage. Was booked up fundamental parameters like bearing, stroke and hoisting speed. First was effected calculation of load on pinion necks and an idle pulley. Subsequently was effected calculation for right election of a rope, an idle pulley, a rope drum and bearings for the rope drum. Up this calculation followed calculation for a right election of an electric motor and a shaft clutch. The documentation was complemented with pictures and tablets, that are seted near single decisive knots of the tackle. To the documentation was creationed how a suggested arrangement drawing so single subassemblies drawings.
|
guest ::
