|
|
Design of technology for a mould manufacturing for casting in short run production
Pivoda, Miroslav ; Dvořáček, Jan (referee) ; Sedlák, Josef (advisor)
The aim of thesis is to describe the basic methods called Rapid Prototyping in theory and using one of them to create master model. Master model will be used to create silicone mould where a limited series of wax models will be by means of vacuum casting chamber. They will also be used to make ceramic form in which the final pad will be cast from freely accessible materials. After processing it the suitability of the proposed technologies for the production of the part in question will be assessed.
|
|
|
Production of glovebox handle on FDM 3D printer
Šuranský, David ; Fiala, Zdeněk (referee) ; Zemčík, Oskar (advisor)
The bachelor thesis analyzes car interior handle production, whose design was slightly modified compared to the original part. It consists of few design drafts, selection of the most suitable one, modification for 3D printing purposes and the part production of ABS material on a FDM printer. Post-processing operations and technical as well as economical conclusions are mentioned at the end of the thesis.
|
|
|
Surface finishing of plastic parts
Nguyen, Manh Thanh ; Škaroupka, David (referee) ; Paloušek, David (advisor)
The main topic of this barchelor thesis is surface finishing of plastic part manufactured by FDM technology. The thesis includes experimetal part which aim is to test various possibilities of surface finishing by acetone vapour etching. Two different samples of ABS materiál will be used for testing. Changes of dimension and geometry will be observed.
|
|
|
Production of interior car handle prototype on 3D FDM printer
Kaššák, Marek ; Dvořák, Jaromír (referee) ; Zemčík, Oskar (advisor)
This bachelor this processes the issue of manufacturing of a prototype of handle for the car interior using method fused deposition modeling method. First part of this is dedicated to a brief overwiev of prototype manufacturing using rapid prototyping technology , with FDM 3D printing and materials used by FDM method. Second part is dedicated to design of 3D model using AutoDesk Inventor 2014 software, prototype manufacturing itself, evaluating of construction technologicality and technological-economic evaluation of manufacturing costs.
|
|
|
Modification of 3D milling machine to 3D printer
Halamíček, Lukáš ; Vetiška, Jan (referee) ; Bradáč, František (advisor)
This thesis deals with rebuilding of engraving machine to 3D printer. In the first part it describes possible 3D printing technologies and its utilizations in rebuilding. In the next section suitable parts for reconstruction are chosen and described. Then the controlling of heating bed, hot end and filament feed is realized by using software TwinCAT by company Beckhoff. Functional 3D printer should be result of this thesis.
|
|
|
Production of Bevel Gears
Vondra, Tomáš ; Prokop, Jaroslav (referee) ; Kalivoda, Milan (advisor)
The objective of this bachelor’s thesis is to provide general information about the theory and production of bevel gears. The thesis also contains a proposal of plastic bevel gears with straight teeth and comparison of two different production technologies, namely slotting and FDM (Fused Deposition Modeling).
|
|
|
Production of charging dock on FDM printer
Válek, Lukáš ; Kolář, Ladislav (referee) ; Zemčík, Oskar (advisor)
The essence of this bachelor’s thesis is describe production of charging dock on FDM printer. The thesis virtually describes the whole process of manufacturing, from its 3D computer design, and setting up its production according to an applicable software, to its actual production. The thesis concludes with an economic evaluation and properties of the production process.
|
|
|
Methodology of design and manufacturing of transtibial prosthesis cover
Romanovský, Jiří ; Koutecký, Tomáš (referee) ; Paloušek, David (advisor)
The bachelor thesis deals with the construction of design cover of transtibial prosthesis using reverse engineering methods. The theoretical part of thesis presents new trends in the field of design of prosthetic covers and tries to analyse and compare them. Furthermore, the bachelor thesis gives a brief overview of the Rapid Prototyping methods wich are used. The practical part of thesis focuses on the description of the methodological approach of cover design of the prosthesis.
|
|
|
Production of gears model on FDM printer
Frátrik, Michal ; Dvořák, Jaromír (referee) ; Zemčík, Oskar (advisor)
This bachelor thesis deals with an issue of 3D printing of gears. In the first part are concisely summarized processes of 3D printing, selected types of Rapid Prototyping considering the FDM and properties of materials used in this method. The second part deals with a suggestion of gears model based on the gearbox of the kitchen blender. Gearbox was designed in 3D modeling program Autocad inventor 2013 and printed on the Reprap printer Sinuhed. There is techno-economic appreciation of production of the model in conclusion.
|
|
|
Production of working replacement part on FDM printer
Frélich, Tomáš ; Dvořák, Jaromír (referee) ; Zemčík, Oskar (advisor)
This bachelor's thesis is looking into the production of a part of a cover for ignitron of motorcycle Honda CR500R. In consideration of the required function and the attributes of the desired part an aditive technology called Rapid Prototyping (hereinafter referred to as „RP“) – method FDM (Fused Deposition Modeling) was chosen. The first part of this thesis defines summary of methods RP and materials usable for these operations. The second part is focused around a design for the 3D model in a program called Autodesk Inventor 2013, the production itself, evaluation of the technology level of the construction and a techno-economic evaluation of the costs.
|
guest ::
